*****************************************************************************
* *
* Digicom S.p.A. PCI Card 10/100 *
* *
* Netware Server Driver Installation Overview *
* *
*****************************************************************************
Contents of the file:
=====================
A) Driver Installation for Netware Server 4.11, 5.0
B) Driver Installation for Netware Server 4.x
C) Driver Installation for Netware Server 3.12
D) Driver Custom Keywords
A) Driver Installation for Netware Server 4.11, 5.0
================================================
1. On the server console, load the NetWare Server Installation Utility.
LOAD INSTALL <- If you use NetWare 4.11
LOAD NWCONFIG <- If you use NetWare 5
2. Choose "Driver Options (load/unload ...)" and press <Enter>.
3. Choose "Configure network drivers" and press <Enter>.
4. Choose "Select an additional driver" and press <Enter>.
5. Press the <Ins> key to install the driver which is not on the list.
6. Press <F3> to specify a different path (A:\NETWARE\SERVER) and press
<Enter>.
7. The PCIODI.LAN should appear on the selection list. Press <Enter> to
choose it.
8. You can "Select/Modify driver parameters and protocols", and then "Save
parameters and load driver".
9. Follow instructions to complete driver installation.
10. It will add the LOAD and BIND command lines to the AUTOEXEC.NCF file so
that the LAN driver will be loaded automatically while the server
is starting up.
B) Driver Installation for Netware Server 4.x
==========================================
1. Insert Driver Diskette in your PC's floppy drive (A: or B:).
2. Change to the NetWare Server directory (for example: CD\NWSERVER)
3. Copy the following files from Driver Diskette to the NetWare
Server directory.
\NETWARE\SERVER\4.X\NBI.NLM
\NETWARE\SERVER\4.X\MSM.NLM
\NETWARE\SERVER\4.X\ETHERTSM.NLM
\NETWARE\SERVER\PCIODI.LAN
4. Sample AUTOEXEC.NCF for NetWare Server 3.12
AUTOEXEC.NCF
============
LOAD C:NBI
LOAD C:MSM
LOAD C:ETHERTSM
LOAD C:PCIODI FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:PCIODI FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:PCIODI FRAME=ETHERNET_II NAME=E_II
LOAD C:PCIODI FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
C) Driver Installation for Netware Server 3.12
===========================================
1. Insert Driver Diskette in your PC's floppy drive (A: or B:).
2. Change to the NetWare Server directory (for example: CD\SERVER.312)
3. Copy the following files from Driver Diskette to the NetWare
Server directory.
\NETWARE\SERVER\3.12\NBI31X.NLM
\NETWARE\SERVER\3.12\MSM31X.NLM
\NETWARE\SERVER\3.12\ETHERTSM.NLM
\NETWARE\SERVER\PCIODI.LAN
4. Sample AUTOEXEC.NCF for NetWare Server 3.12
AUTOEXEC.NCF
============
LOAD C:NBI31X
LOAD C:MSM31X
LOAD C:ETHERTSM
LOAD C:PCIODI FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:PCIODI FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:PCIODI FRAME=ETHERNET_II NAME=E_II
LOAD C:PCIODI FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
D) Driver Custom Keywords
======================
The following parameters are used in PCIODI.LAN.
1. SLOT : specifies which adapter is enabled when multiple PCI adapters
are found in your computer. The SLOT keyword is an index
value corresponding to PCI BIOS. The mapping from SLOT
to physical PCI slot is different from one machine to
another.
Ex: LOAD PCIODI SLOT=3 FRAME=ETHERNET_802.2
LOAD PCIODI SLOT=4 FRAME=ETHERNET_802.2
2. FRAME : specifies which frame type is used by the driver. Accepted
values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
Ethernet_SNAP. Multiple frame types can be enabled
by loading the same driver with different FRAME types.
Ex: LOAD PCIODI FRAME=ETHERNET_802.2
LOAD PCIODI FRAME=ETHERNET_802.3
LOAD PCIODI FRAME=ETHERNET_II
LOAD PCIODI FRAME=ETHERNET_SNAP
3. NODE : Use a different address to replace the node address burned
in EEPROM.
Ex: LOAD PCIODI NODE=02A0A2001122
4. MEDIUMTYPE : Specifies which medium type is used by the driver.
Accepted vaules are AUTO,100FULL,100HALF,10FULL and 10HALF.
Ex: LOAD PCIODI SLOT=3 MEDIUMTYPE=100HALF FRAME=ETHERNET_802.2
---
All trademarks and brand names mentioned belong to their
respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.