v1.1.3790.4(A012) .sys (1)change PHY setting model(defual) from force model to Auto model. (2)modify HardwareUpdateDroppedInfo. .exe (1)Mimo-v2.0.60.8 v1.1.3790.3(A012) .sys (1)change pcie reg 0x12fc from 0x6700 to 0x6500 (2)set pcie reg 0x1104 to 0x568 (3)set PHY setting model(defual) from Auto model to force model. v1.1.3790.2(A012) .sys (1)change pcie reg 0x12fc from 0x6500 to 0x6700 v1.1.3790.1(A012) .sys (1)change phy init model. .exe (1)Mimo-v2.0.60.7 v1.1.3790.0(A012) .inf (1) Add "Wake Up Capabilities" tag from INF(device properity) .sys (1)Add "Wake Up Capabilities" function. (2)Add "Reconfig h/w reg by install.ini." function. (3)Add "Reconfig device speed by install.ini. .exe (1)Mimo-v2.0.60.6 v1.0.3790.3(A012) .sys (1)When power down,then set PCIE register 0x1104 bit 10 to 1. v1.0.3790.2(A012) .sys (1).fixed "L2 Wake-On-LAN fail" v1.0.3790.1(A012) .sys (1).fixed "MediaType 10F/H to 100F/H can not link" v1.0.3790.0(A012) .sys Creation(2006/05/23)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.