1. PE2000_inst.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (PE2000_inst.exe)

What is PE2000.EXE
-------------------
PE2000.EXE is a DOS diagnostics program for the PE2000 PC card.
To use the PE2000.EXE, you can simply run it on DOS prompt by
typing A:\PE2000 and press [Enter]. INSTALL.BAT is also provided
on the diskette to invoke this program for your convenience. The
main menu as follows will be shown on the screen.

        Main Menu

        1 - Installation
        2 - Configuration
        3 - Diagnostics
        4 - Echo Test
        5 - Installation Help for Windows 95/OSR2/98
        6 - Installation Help for Windows NT4.0/3.51
        7 - Installation Help for Netware ODI driver 
        8 - Installation Help for DOS NDIS2 driver 
        9 - Exit
      
      +++++++++++++++++++
      + IMPORTANT NOTES +
      +++++++++++++++++++
      
      Select 3 and run Diagnostics, it will automatically configure system and 
      test the hardware and its function. If all the tests in Diagnostics mode
      pass, you can select 2 and run Configuration to get correct setting 
      for IRQ, I/O base, and Memory base. This is important configuration 
      information if difficulties are encountered after installing the drivers
      on Windows NT 4.0, 3.51 etc. You can use this configuration information
      to change the CardBus 10/100 Ethernet PC Card default settings.