Windows 95 OSR2
Introduction:
-------------
This document shows you how to setup the driver and how to use the
enhanced functions by setting the custom keywords.
Location of Driver: \WIN95B\DXE101.SYS
Contents of the Subdirectory:
-----------------------------
DXE101.SYS The driver for Windows 95 OSR2.
NETE101.INF The installation information file.
Installation:
-------------
Before starting with the installation process, make sure that the
adapter is properly installed and configured.
1.When you plug the DX-E101 in the mother board and power on the
Windows 95 OSR2, the 'Update Device Driver Wizard' window will prompt
and say that
The wizard will complete the installation of
PCI Ethernet Controller
2.Click 'Next' then it will say
'Windows was unable to locate a driver for this device'.
Click 'Other Location' button.
3.Put the driver disk in the floppy drive and enter the driver path i.e.
'A:\WIN95B' in Location Field and click 'OK'.
4.It will show that Windows found the following updated driver for this
device:
Dynex DX-E101 PCI adapter
And
Location of Driver
A:\WIN95B
Click 'Finish'.
5.If this is your first time to install the Ethernet adapter and have
not install the protocols and clients for Microsoft and Netware,
please do NOT restart the computer.Go to the Start\Settings\Control
and double-click the Network icon to install the other necessary
files for the network operation.
Windows 95 OSR2 will ask you Do you want to restart your computer now?
,Click 'Yes' to restart the Windows 95 OSR2.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.