1. Myson_NIC_Windows.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (Myson_NIC_Windows.zip)

                              MTDPKT.COM

                          Myson Technology Inc.


Introduction:

  This document describes the procedure to setup the Packet driver for
  MYSON MTD80X Based PCI Ethernet Adapter.

  Location of Driver:     \PKTDRV\MTDPKT.COM


Usage:

  Load the packet driver using the software interrupt and any
  optional switches if required.

  Usage: MTD80X [-u] <software_int_no> [media]

  Example: MTD80X 0x60

  The only required parameter is the software interrupt.  A packet
  driver needs to have a software interrupt assigned to it for other
  programs to access it.
  If you need any of the options listed below, place them before the
  software interrupt on the command line.

    -u           : to unload this driver",CR,LF
    packet_int_no: to set software interrupt for this driver
                   the reasonable value is from 0x60 to 0x80
    media        : to set the line speed and fullduplex function
                   the reasonable value is auto/10half/10full/100half/100full
                   auto    = enable autonegotiation
                   10half  = force to 10M, half duplex
                   10full  = force to 10M, full duplex
                   100half = force to 100M, half duplex
                   100full = force to 100M, full duplex


Histories of Release:

  ***) 1.00,  08-09-1999
         First release.

  ***) 1.10,  04-24-2000
         For the PHY issue.
         Change driver name to MTDPKT.COM.

  ***) 2.00,  06-27-2000
         For MTD800, MTD803 and MTD891.

  ***) 2.10,  07-05-2000
         For RSAN issue.

  ***) 2.20,  07-10-2000
         For medium changes issue.

  ***) 2.30,  07-25-2000
         Verify the driver for MTD800+MTD981 demo board.

  ***) 2.40,  07-25-2000
         Verify the driver for plug/play problem at runtime.

  **)  2.60,  09-01-2000
         Verify the driver for OEM issue.
         Delete polling link status action.


How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.