MYSON TECHNOLOGY Inc. MTD80X based 100/10M PCI ETHERNET ADAPTER RPL Boot Rom =========================================== A. How to install the Novell RPL Server 1. Creating a remote boot diskette(DOS 5.0 or later). Copy the following files into this boot diskette: COMMAND COM IO SYS MSDOS SYS LSL COM MYODI COM IPXODI COM NETX EXE (or VLM.EXE & *.VLM file) AUTOEXEC BAT CONFIG SYS ==>AUTOEXEC.BAT example PATH F:\LOGIN; SET COMSPEC=F:\LOGIN\COMMAND.COM LSL MYODI IPXODI NETX or VLM ==>CONFIG.SYS example DEVICE=HIMEM.SYS STACKS=9,256 DOS=HIGH,UMB FILES=30 BUFFERS=30 LASTDRIVE=Z 2. Login the server as ADMIN useing DOS boot diskette. 3. Change directory to SYS:SYSTEM 4. With the DOS boot diskette in driver A: execute the DOSGEN utility. This creates a DOS boot image file named NET$DOS.SYS. For example: F:\SYSTEM\DOSGEN A: 5. Copy NET$DOS.SYS to the SYS:LOGIN directory. For example: F:\SYSTEM\COPY NET$DOS.SYS F:\LOGIN 6. Edit the AUTOEXEC.NCF file in the SYS:SYSTEM directory to load RPL protocol and bind it. For example: file server name NW411 ipx internal net 1234 load MTD80X SLOT=1 name=nw411_1 frame=ETHERNET_802.2 load MTD80X SLOT=1 name=nw411_1_2 frame=ETHERNET_II load MTD80X SLOT=1 name=nw411_1_3 frame=ETHERNET_802.3 load MTD80X SLOT=1 name=nw411_1_4 frame=ETHERNET_Snap bind ipx to nw411 _1 net=11 bind ipx to nw411 _2 net=22 bind ipx to nw411 _3 net=33 bind ipx to nw411 _4 net=44 # load rpl protocol and bind it ======= load rpl bind rpl to nw411_1 #======================================= mount all 7. Reboot the Netware Server. 8. Configure the MTD80X Adapter ==> Boot ROM Enable and Boot ROM Speed. B. How to install the Microsoft Windows NT RPL server 1. Installing the "Remoteboot Service" on the NT Server. a. Choose the Control Panel under the NT Server, and then select the network options. b. Add the DLC and NetBEUI protocol in the protocols, and you also need add the Remoteboot service in the services. c. During the installation, you need to put the NTAS CD disk into the CD-ROM. 2. Sharing the directory \RPLFILES in the NT Server. Sharing the directory \WINNT\RPL\RPLFILES by using File Manger sharing. 3. Copy all the MS-DOS 6.22 ver files to \WINNT\RPL\RPLFILES\BINFILES\DOS622 For example: a. Make the DOS 6.22 Boot floppy disk. b. attrib -s -h a:\io.sys in the boot disk. c. attrib -s -h a:\msdos.sys in the boot disk. d. copy a:\io.sys \WINNT\RPL\RPLFILES\BINFILES\DOS622 e. copy a:\msdos.sys \WINNT\RPL\RPLFILES\BINFILES\DOS622 4. Creating Remoteboot configuration for new adapter a. Copy the NDIS2(MTD80X.DOS) for the MTD80X Adapter to the "\WINNT\RPL\BBLOCK\NDIS" directory. * You can find MTD80X.DOS from \BOOTROM\RPL\NTRPL directory. b. Create this directory \WINNT\RPL\BBLOCK\NETBEUI\MTD80X and then copy the W95BB.CNF, MTD80X.CNF and PROTOCOL.INI files to the directory. * You can find these files \BOOTROM\RPL\NTRPL directory. c. In MS-DOS Prompt type "NET START RemoteBoot". d. Use RPLCMD utility to add a bblock record for new adapter. e. Screen will display under line option and you following these do it. Adapter Boot Config Profile Service Vendor Wksta [Quite] V Add Del Enum:A VendorName=004095 <Ether ID> VendorComment=MYSON for MTD80X Adapter Boot Config Profile Service Vendor Wksta [Quite] B Add Del Enum:A BootName=DOSMX VendorName=004095 BbcFile=BBLOCK\NETBEUI\MTD80X\MTD80X.CNF BootCommet=MTD80X PCI Adapter <Name of this adapter> WindowsSize=0 Adapter Boot Config Profile Service Vendor Wksta [Quite] C Add Del Enum:A ConfigName=DOS622MX BootName=DOSMX DirName=DOS DirName2=DOS622 FitShared=FITS\DOS622.FIT FitPersonal=FITS\DOS622P.FIT ConfigComment=DOS 6.22 for MTD80X PCI Adaper <Name of the Config> DirName3= DirName4= Adapter Boot Config Profile Service Vendor Wksta [Quite] Q f. Shutdown Windows NT server, and reboot it. 4. Login Administrator to NT server. 5. Starting Remoteboot service and Remoteboot Manager a. In MS-DOS Prompt type "NET START Remoteboot" b. In Network administrator, select Remoteboot Manager 1.Choose Remoteboot, New Profile, created a MTD80X Profile Name 2.Add new workstation for MTD80X Adapter and choose MTD80X Profile file. 6. To config MTD80X Adapter "Node ID (004095******)" and Running Boot ROM of Adapter MTD80X Adapter. Note: If the new workstation Node ID is not match for your workstation, you can use "Convert Adapters" in Remoteboot option. Histories of Release: ***) 2.20, 07-04-2000 For MTD800, MTD803 and MTD891. ***) 2.92, 08-28-2000 Verify with MTD803. **) 2.93, 09-01-2000 Verify the driver for OEM issue. Delete polling link status action. **) 2.94, 09-13-2000 Verify the driver on WinNT4.0 Server Platform.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.