PROCEDURES TO UPDATE M5PI FLASH BIOS : 1. i) INSTALL JUMPER W28 TO DISABLE WRITE PROTECTION OF FLASH BIOS { REV A } ii) INSTALL JUMPER W22 TO DISABLE WRITE PROTECTION OF FLASH BIOS { REV B } 2. BOOT SYSTEM CLEAN WITHOUT CONFIG.SYS & AUTOEXEC.BAT 4. RUN FSH20G.EXE AND SELECT UPDATE BIOS FOR NEW BIOS FILE. 5. THE NEW BIOS NAME WILL BE M5PI-10.BIN YOU MUST ENTER THE FILE NAME AND THE PATH TO THE FILE. 5. BE PATIENT, SYSTEM WILL INDICATE A CHECKSUM AND PROMPT USER TO REBOOT SYSTEM. 6. THE NEW BIOS IS NOW INSTALLED, THE NEW VERSION NUMBER WILL INDICATE @ POST. 7. MAKE SURE YOU REMOVE JUMPER W28 OR W22 DEPENDING ON THE REV YOU HAVE. VTF 2-2-94Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.