**************************************************
Myson MTD80X Based Fast Ethernet Card
NOVELL DOS ODI Driver Installation Guide
**************************************************
-----------------------
Installation Procedure
-----------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Make sure
that your NWCLIENT operating system is properly installed.
a. Edit the NET.CFG if you want to change some parameters.
Sample NET.CFG File
-------------------
Link Driver MTD80X
FRAME Ethernet_802.2
FRAME Ethernet_802.3
FRAME Ethernet_II
FRAME Ethernet_SNAP
NetWare DOS Requester
FIRST NETWORK DRIVE = F
NETWARE PROTOCOL = NDS BIND
MAX IPG = 0
b. Run the following command in the order given below and
press <Enter>:
LSL
MTD80X
IPXODI
VLM or NETX
c. You can now log onto Netware server.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.