Microsoft USB 2.0 drivers
==========================
Table of contents
------------------
1. Introduction
2. Contents of this folder
3. Installation Directions
---------------
1. Introduction
---------------
The contents on this folder are USB2.0 drivers for Windows 2000 and Windows XP.
1.1 USB 2.0 EHCI Host Controllers Supported
-------------------------------------------
The drivers have been tested with the SiS USB2.0 host controller.
The hardware ID of the SiS USB 2.0 host controller supported by the provided solurion is as follows:
PCI\VEN_1039&DEV_7002
1.2 USB 2.0 Hub support
-----------------------
USB 2.0 hubs are supported by this package.
--------------------------
2. Contents of this folder
--------------------------
This folder contains the USB 2.0 EHCI package necessary to support USB EHCI controllers and USB 2.0 hubs.
There are two folders, win2k & winxp:
The win2k folder consists of the following files:
USBHUB20.SYS
USBPORT.SYS
USBEHCI.SYS
HCCOIN.DLL
USB2.INF
USB2.CAT
SISUSB2.INF
The winxp folder consists of the following files and sub-folder:
"QFE" folder
USBEHCI.SYS
HCCOIN.DLL
USB2X.INF
USB2X.CAT
SISUSB2X.INF
In the QFE folsers, there are 24 sub-folders which contains different QFE language version each.
-------------------------
3. Installation Direction
-------------------------
3.1 For Windows XP
------------------
a. Run correct language version of QFE. For example, english version,
execute "Q312370_WXP_SP1_x86_ENU.exe" at ...\Multi-Lang Install\winxp\QFE\EN
b. Restat.
c. Open the Device Manager, you will see "? Universal Serial Bus (USB) Controller".
Otherwise, scan hardware change, you will find it.
d. In the "Find New Hardware Wizard", select "Install from a list or specific location (Advanced)" and press "Next".
e. Then select "Include this location in the search:". Use the "Browse" button to indicate the location of our sisusb2x.inf.
f. And then select the "Continue Anyway" button.
g. Finish.
3.2 For Windows 2000
--------------------
Unlike the Windows XP, a QFE package is not required for the windows 2000.
So you can begin from step c. as above. The location of our sisusb2.inf for Windows 2000 is ...\Multi-Lang Install\win2k.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.