[Utility]
AppTitle=802.11 Wireless Client Utility v2
MsgTitle=802.11 Wireless Client Utility v2
[BtnCaption]
BtnOk=OK
BtnCancel=Cancel
BtnClose=Close
BtnBack=Back
BtnNext=Next
BtnSave=Save
BtnBrowse=Browse
BtnRefresh=Refresh
BtnDetail=Detailed Info.
BtnConnect=Connect
BtnAdd2Prof=Add To Profile
BtnReconnect=Reconnect
BtnIPRelease=IP Release
BtnIPRenew=IP Renew
BtnSetting=Settings
BtnApplyNow=Apply Now
BtnConfig=Configure
BtnCfgCert=Configure Certificate
BtnYes=Yes
BtnNo=No
BtnUp=Up (&U)
BtnDown=Down (&D)
BtnAdd=Add (&A)
BtnRemove=Remove (&R)
BtnProperty=Properties (&P)
BtnApply=Apply (&Y)
BtnImport=Import (&I)
BtnExport=Export (&E)
[Menu]
MenuAbout=About...
MenuOpen=Open (&O)
MenuClose=Exit (&X)
MenuUseXP=Turn on zero configuration
MenuUseOur=Turn off zero configuration
[FrameNetwork]
GroupWireless=Wireless Setting
LbCntProf=- Current Profile
LbNetMode=- Network Mode
LbSecurity=- Security
LbAuthen=- Authentication
GroupTCPIP=TCP/IP Setting
LbIPAddr=IP Address:
LbMask=Subnet Mask:
LbGateway=Gateway:
LbDNS=DNS Server:
LbUseDHCP=Using DHCP
LbNoDHCP=Using Static IP
[FrameProfile]
LbProfList=Profile List (current profile tagged #)
LbPriority=Change Priority
LvProfCol0=Name
LvProfCol1=SSID
LvProfCol2=IP Address
LbAnySSID=ANY
WinIPSet=Windows Setting
UseDHCP=DHCP
RemoveProf=Really remove '%s'?
[FrameSiteSurvey]
LbAvailableNetwork=Available Networks
PanelSearching=Searching ...
LvSiteCol0=SSID
LvSiteCol1=Mode
LvSiteCol2=Strength
LvSiteCol3=Ch
LvSiteCol4=Security
LvSiteCol5=BSSID
LbFound=Found
NeedSetWEP=Selected network uses WEP.\nPlease configure WEP.
NeedSetWPA=Selected network uses WPA.\nPlease configure WPA.
NeedSetWPAPSK=Selected network uses WPA-PSK.\nPlease configure WPA-PSK.
NeedSetWPA2=Selected network uses WPA2.\nPlease configure WPA2.
NeedSetWPA2PSK=Selected network uses WPA2-PSK.\nPlease configure WPA2-PSK.
ConnectSite=This network will not be added to the Profile list.
[FrameOption]
GroupOption=Options
ChkLaunch=Launch at windows startup
ChkDHCP=Auto DHCP renewal
LbAutoProf=Using auto profile selection
LbNoAutoProf=Not using auto profile selection
ChkWinControl=Let Windows manage this wireless adapter
LbZeroCfg=- Windows Zero Configuration
[FrameVersion]
GroupSW=S/W Information
LbPackageVer=Package Version:
LbDriverVer=Driver Version:
LbUtilityVer=Utility Version:
WEB=
GroupHW=H/W Information
LbSupportMode=Supported Mode:
LbMACAddr=MAC Address:
LbSupportCH=Supported Ch:
LbChannel=Ch
[FrameLinkInfo]
GroupLinkInfo=Link Information
LbSSID=- SSID
LbStatus=- Status
LbSpeed=- Link Speed
LbThroughput=- Throughput
LbSignalLev=- Signal Level
LbTrans=Tx
LbReceive=Rx
GroupBSSID=
LbBSSID=BSSID =
LbChannel=Channel =
[FrameBasicSet]
GroupProfName=Profile Name
LbInProfName=Please enter a name for this profile.
LbEx=(such as Office or My Home)
GroupNetworkMode=Network Mode
LbModeInfra=- Network using AP
LbModeAdHoc=- Network between stations without AP
LbMode=Mode
LbChannel=Channel
LbModeDescrp1=Choose infrastructure mode if you are connecting to an access point or
LbModeDescrp2=wireless router. Choose Ad-Hoc mode if you are connecting
LbModeDescrp3=directly to another computer.
GroupSSID=SSID
LbInSSID=Enter the network SSID.
LbSSIDDescrp=Click the Browse button to scan for available networks.
[FrameAdvSet]
GroupPower=
ChkAutoPower=Auto Power Saving Mode
LbPowerSave=Power Saving:
LbPreamble=802.11b Preamble:
LbRTS=RTS Threshold:
LbFRAG=FRAG Threshold:
LbRoaming=Roaming Optimization:
GroupTxRate=Data Tx Rate
ChkAutoFallback=Use Auto-Fallback
Lb802bTx=802.11b Tx Rates:
Lb802gTx=802.11g Tx Rates:
Lb802aTx=802.11a Tx Rates:
[FrameSecurity]
GroupSecurity=WLAN Security Configuration
LbSecurity=Security Mode:
GroupAuthen=Authentication Protocol
GroupEncryp=Encryption Method
ChkWEP=Use Static WEP
GroupUserInfo=User Information
LbUserID=User ID:
LbPasswd=Password:
LbMyCert=My Certificate:
LbServerCert=Server Certificate:
LbServerName=Server Name:
GroupPassPhrase=PSK Passphrase
LbPassPhrase=8-63 characters
szNoUserCert=No user certificate
szNoServerCert=No server certificate
[FrameFreq]
GroupFreq=Wireless Protocol
Chk802B=802.11b
Chk802G=802.11g
Chk802A=802.11a
Group802gCfg=802.11g Configuration
LbERP=Non-ERP Protection Mode:
LbSlotTime=Slot Time:
[FrameChipset]
GroupChipset=Chipset Features
LbTxPower=Tx Power Level:
LbAntenna=Antenna Diversity:
ChkSuperA=Super A
ChkSuperG=Super G
ChkXR=XR (eXtended Range)
ChkFrameBurst=Frame Burst
[FrameTCPIP]
GroupTCPIP=TCP/IP Configuration
ChkIPChanger=Use IP Changer
RBtnDHCP=Use DHCP
RBtnStaticIP=Use this static IP
LbIP=IP Address:
LbMask=Subnet Mask:
LbGateway=Gateway:
LbDNS1=Pri DNS Server:
LbDNS2=Sec DNS Server:
[FrameEnd]
GroupEnd=End
LbCongra=All information was configured.
LbAskApply1=
LbAskApply2=
ChkApply=Apply this profile now.
[FormProfSet]
CaptoinAdd=802.11 Wireless Client Utility Profile Wizard
CaptionEdit= Properties
TreeItBasic=Basic Settings
TreeItAdv=Advanced Settings
TreeItSecurity=WLAN Security
TreeItFreq=Wireless Protocol
TreeItChip=Chipset Features
TreeItTCPIP=TCP/IP
[FormSiteInfo]
Caption=Detailed Info.
LbSSID=SSID:
LbBSSID=BSSID:
LbChannel=Channel:
LbNetworkMode=Network Mode:
LbSecurity=Security:
LbSuptRate=Supported Rate (Mb/sec):
LbPhyLayerType=Physical Layer Type:
LbBeaconPerd=Beacon Period (msec):
[FormSetAutoProf]
Caption=Auto Profile Selection Setting
ChkNoAuto=Do not use this feature.
ChkAuto=Use this feature.
GroupAutoMethod=Auto selection method
ChkByPriority=According to priority
ChkBySignal=According to signal strength
LbTimeOut=Connection time out (seconds)
ChkShowMessage=Show message when applying auto selected profile
[FormCfgCertificate]
Caption=Configuration Certificate
GroupCertMang=Certificate Management
ChkUserCert=Use User Certificate
ChkServerCert=Validate Server Certificate
LbServerName=Server Name:
ChkExactly=Server name should match exactly
[FormAuthenInner]
Caption=Authentication Protocol Configuration
LbAuthenInner=Inner Protocol:
LbSelInner=Select inner protocol for
[FormWEPSet]
Caption=WEP Configuration
GroupWEP=Static WEP
LbMethod=WEP Method:
LbAuthen=Authentication:
RBtnPassPhrase=Make key using passphrase.
LbPassphraseInfo=- The key generated is a HEX key.
LbPassphrase=Passphrase:
LbManual=Manual Input:
LbASCII=ASCII
LbHEXA=HEX
LbChar=char
LbHexChar=char (0-9, A-F)
LbKey1=Key 1:
LbKey2=Key 2:
LbKey3=Key 3:
LbKey4=Key 4:
LbDefKey=Default Key:
[FormSiteSearch]
Caption=Site Survey
[FormAskAutoProf]
ChkNoAsk=Do not show this message any more
LbPriority=Connecting to '%s' by priority
LbSignal=Connecting to '%s' by signal strength
[Message]
AdapterAtt=Adapter is active
AdapterDet=Adapter is inactive
TrayTipDefault=802.11 Wireless Client Utility
TrayTipActive='%s' is active.
TrayTipInactive='%s' is inactive.
TrayTipNotInstalled='%s' is not installed
DescribeNoSignal=No Signal
DescribePoor=Poor
DescribeGood=Good
DescribeVeryGood=Very Good
DescribeExcellent=Excellent
CreateDefProf="There is no profile. Do you want to make profile now?"
ErEmyProfName=You should enter a profile name.
ErSamProfName=%s already exists. Please enter another name.
ErSysUseProfName=This profile name is used by the system. Please enter a different name.
ErWEPKey=You have entered an incorrect WEP key. Please try again.
ErWPAPassphrase=Passphrase should be between 8 and 63 characters.
ErEmptyName=The User ID is empty. Please enter a user name.
ErEmptyPw=The Password is empty. Please enter a password.
ErNoSelBand=No band was selected! \nAt least one band must be selected.
[Common]
Unknow=N/A
dBm=dBm
Kbps=Kbps
Mbps=Mbps
GHz=GHz
Auto=Auto
Scanning=Scanning
Connected=Connected
Connecting=Connecting...
DisConnected=Disconnected
Authenticating=Authenticating...
AuthenRetry=Authentication failed, retrying...
AuthenFail=Authentication failed
Authenticated=Authenticated
Enabled=Enabled
Disabled=Disabled
Signal=Signal
Quality=Quality
TrustAny=Trust Any
None=None
NotUse=Not Use
Infrastructure=Infrastructure
AdHoc=Ad-Hoc
Encrypt_None=Disabled
Encrypt_WEP=WEP
Encrypt_WPA_PSK=WPA-PSK
Encrypt_WPA=WPA
Encrypt_Radius=RADIUS
Encrypt_LEAP=LEAP
Encrypt_WPA2_PSK=WPA2-PSK
Encrypt_WPA2=WPA2
Encrypt_WPA_WPA2_PSK=WPA-PSK/ WPA2-PSK
Encrypt_WPA_WPA2=WPA/ WPA2
Authen_None=None
Authen_MD5=MD5
Authen_LEAP=LEAP
Authen_TLS=TLS
Authen_TTLS=TTLS
Authen_PEAP=PEAP
WEP_64=64 bit WEP
WEP_128=128 bit WEP
WEP_152=152 bit WEP
WPA_TKIP=TKIP
WPA_AES=AES
AuthModeOpen=Open
AuthModeShare=Shared
AuthModeAuto=Auto Switch
AuthModeWPA=WPA
EAP_GTC=EAP/GTC
EAP_MSCHAP_2=EAP/MS-CHAP v2
Drv_Encrypt_None=Not Using WEP
Drv_Encrypt_WEP=WEP
Drv_Encrypt_AES=AES
Drv_Encrypt_CKIP=CKIP
Drv_Encrypt_TKIP=TKIP
802B=802.11b
802G=802.11g
802A=802.11a
802G_Trb=802.11g Turbo
802A_Trb=802.11a Turbo
PowSaveNo=No Power Saving
PowSaveMax=Max. Power Saving
PowSaveFast=Fast Power Saving
PreambleLong=Long Preamble
PreambleShort=Short Preamble
PreambleAuto=Auto
RoamNo=Do not consider roaming
RoamDef=Default roaming mode
RoamOpt=Optimized in roaming
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.