a:\win95\readme.txt 20-AUG-1996
The following step should be taken in order to use the
Digital EtherWORKS Turbo PCI 10 in a system running
Windows 95:
1. Before inserting the card into your system boot Windows 95.
*******************************************************************
If the adapter was inserted in the system and Windows 95 was
booted after the DE450 adapter was installed in the system,
please do the following:
- From within Windows 95 double click on "My Computer",
followed by "Control Panel", then "Network".
- Under the heading "The following network components are
installed", check to see if there is a line which says
"PCI Fast Ethernet DECChip 21041 based adapter." If this
line exist, click on it and then click on "Remove".
- Select "OK" to exit from the network setup window.
- Proceed with steps 2 through 8.
*******************************************************************
2. Insert this driver disk into the floppy drive. From the
"Start" menu of Windows 95 select "Run". Next to where it
"Open:" appears in the dialog box, type "A:\SETUP". Click
on "OK" and the EZWORKS installation program will start.
3. Under "Select a Network Operating System" click on the
"Windows 95" line.
4. Click on the "Install" button in order to copy all the
necessary files onto the system.
5. Exit EZWORKS by clicking on "File" in the menu bar and then
"Exit".
6. Shutdown Windows 95 and power off the computer.
7. Insert the network adapter into the system and connect the
network cable to it.
8. Power the system back on and boot Windows 95. Windows 95
will automatically detect the card and start the drivers.
Follow any instructions that Windows 95 displays to complete
the installation process. Reboot if requested to do so by
Windows 95.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.