a:\readme.txt 07-FEB-1997
Version 2.6
DOS-format Driver Diskette
for
Digital EtherWORKS TURBO PCI 10
and
Digital EtherWORKS TURBO PCI 10 TP
Copyright (c) Digital Equipment Corporation, 1997.
All Rights Reserved. Unpublished rights reserved
under the copyright laws of the United States.
RESTRICTED RIGHTS LEGEND Use, duplication, or
disclosure by the U.S. Government is subject to
restrictions as set forth in Subparagraph (c)(1)(ii)
of DFARS 252.227-7013, or in FAR 52.227-19, as
applicable.
Thank you for purchasing a Digital EtherWORKS TURBO PCI 10
Network Interface Card (DE450).
Digital's Network Product Business is committed to providing you
with updated device drivers to insure that these cards will install
easily, perform exceptionally well, and operate in all the latest
network operating systems (NOS).
Contents:
1. GENERAL README INFORMATION
2. GENERAL DE450 INFORMATION
3. DRIVER DISKETTE ORGANIZATION
4. HOW TO GET THE LATEST SOFTWARE RELEASES
The SCO LLI drivers and NDIS3 Windows for Workgroups 3.11 enhanced
mode drivers on this diskette will install and operate for the
DE425, DE434, DE435, DE450, and DE500 adapters. The SCO MDI driver
will install and operate for the DE425, DE434, DE435, and DE450
adapters. See the README.TXT files in the WFW and SCO directories
for more information. Other drivers on this diskette function only
on the DE450 adapter.
******************************
* GENERAL README INFORMATION *
******************************
This README.TXT file describes the contents of this Driver Diskette.
The RELEASE.NOT file, also included in the root directory of this
diskette, contains detailed technical information regarding known
anomalies.
Some of the README.TXT files are long. You can print a copy of the
appropriate README.TXT before beginning any of the installations.
To view the README.TXT file, you can use a text editor installed on
your system, or use the following procedure:
At the MS-DOS prompt, enter the following:
MORE <README.TXT
The text output pauses at the end of each full screen. The text
output resumes when you press ENTER. To stop viewing the README.TXT
file, press CTRL-C.
*****************************
* GENERAL DE450 INFORMATION *
*****************************
DE450 adapters use the Digital DC21041 Ethernet controller chip.
Throughout this diskette, DC21x4 is used as a synonym for the DE450.
These adapters support full duplex Ethernet communication when
connected to a full duplex-compatible device. Ensure that the
connected device supports full duplex mode before enabling this
feature, or serious network problems can result.
********************************
* DRIVER DISKETTE ORGANIZATION *
********************************
The root directory of the Driver Diskette contains the following
files:
README.TXT - This file
RELEASE.NOT - Driver release notes
INSTALL.BAT - Used to run the installation utility
SETUP.BAT - Used to run the installation utility
OEMSETUP.INF - Used by Windows for Workgroups to install the DOS
NDIS2, NDIS3, or ODI driver
DE450.INF - Used by Windows 95 to install the NDIS3 driver
OEMSETNT.INF - Used by Windows NT to install the Windows NT drivers
DISK1 - Used by Windows NT to install the Windows NT drivers
The root directory of the Driver Diskette contains several sub-
directories. The subdirectories and their contents are summarized
below. Each subdirectory contains a README.TXT file that provides
detailed operating and installation instructions for its associated
drivers.
\BOOTROM
Contains information for obtaining the quad-protocol remote boot
ROM for this controller.
\INSTALL
Contains the system installation utility and diagnostics for
the controller. Run the diagnostics to verify the proper
installation of the controller, or if you suspect that there is
a controller hardware failure.
\MSLANMAN.DOS
Contains the DOS NDIS2 driver for the controller for Microsoft
Lanman installation.
This directory structure is required for automatic installation
by Microsoft Lan Manager. The driver contained in this
subdirectory tree is identical to the driver in the \NDIS2
subdirectory tree.
\NDIS2
Contains the DOS and OS/2 NDIS2 drivers for the controller.
\NOVELL
Contains the drivers for Novell NetWare client and server
operations and for using your controller under NetWare SFT III.
\PATHWRKS
Contains the native Pathworks DLL driver for the controller.
\PKTDRV
Contains the packet driver for the controller.
\SCO
Contains the SCO LLI and MDI drivers for the controller.
\WFW
Contains the Microsoft WFW NDIS3 driver for the controller.
\WIN95
Contains the Microsoft Windows 95 driver for the controller.
\WINNT
Contains the Microsoft Windows NT drivers for the controller.
*******************************************
* HOW TO GET THE LATEST SOFTWARE RELEASES *
*******************************************
The latest software releases are available via anonymous FTP over
the Internet. Connect to ftp.digital.com and set your default
directory to /pub/DEC/adapters/ethernet.
The software releases are also available on the World Wide Web,
at www.networks.digital.com/dr/nics/drivers.
Our easy-to-use, menu-driven Networks Bulletin Board Service
gives you on-line access to the latest product information,
device drivers, and utilities! Simply dial (508)486-5777,
24 hours a day!
Check the DECPCI Forum on CompuServe for the latest versions of
drivers.
For the latest in supported platforms and product information
regarding your Digital EtherWORKS product, call your local
authorized Digital reseller, or dial 1-800-DIGITAL in the U.S.
*******************************************************************
***TRADEMARKS***
CompuServe is a registered trademark of CompuServe, Incorporated.
EtherWORKS, DEC, Digital, and DECpc are trademarks of Digital
Equipment Corporation.
Microsoft, MS, and MS-DOS are registered trademarks and Windows,
Windows NT and Windows 95 are trademarks of Microsoft Corporation.
Novell, NetWare, and LAN WorkPlace are registered trademarks and
NetWare Loadable Module, NLM, and NetWare SFT are trademarks
of Novell, Incorporated.
OS/2 is a registered trademark of International Business Machines
Corporation.
SCO is a registered trademark of Santa Cruz Operations,
Incorporated.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.