a:\pathwrks\readme.txt 21-JUN-1995 PATHWORKS Drivers for EtherWORKS TURBO PCI 10 and EtherWORKS TURBO PCI 10 TP **************************************** * GENERAL PATHWORKS DRIVER INFORMATION * **************************************** There are currently two driver types for the EtherWORKS TURBO PCI 10 adapter (DE450) supplied on this diskette that are compatible with PATHWORKS. The NDIS2 driver, which is written to the industry standard NDIS 2.0.1, can be used. This driver, and installation instructions for it, can be found in the NDIS2 subdirectory of this diskette. The PATHWORKS native DLL driver, DLLDE450.EXE, is found in this subdirectory. The installation instructions are found in this README.TXT. ******************************************* * PATHWORKS NATIVE DLL DRIVER INFORMATION * ******************************************* 1.) Requires PATHWORKS V4.1 or greater. Earlier version are not supported. 2.) Requires DNNETH.EXE to be V4.1.142 or greater (users with previous versions of DNNETH.EXE will experience hangs when connecting to network drives). 3.) Connecting to a PC that is running PERMIT requires the DECnet address of the PC running PERMIT to be defined with MS-NET on the PC that is attempting to establish a connection. Use the NCP program to define the MS-NET parameter. 4.) PATHWORKS 4.1 users can automate the native datalink driver installation by running NETSETUP. Choose "EtherWORKS Native Datalink" as the Ethernet Adapter type. After NETSETUP finishes, change the following line in STARTNET.BAT: %BOOT%\decnet\dlldepca.exe to %BOOT%\decnet\DLLDE450.exe Once this change is complete copy the DLLDE450.EXE driver from the \PATHWRKS directory of this diskette to the \DECNET directory on your hard drive. 5.) PATHWORKS 5.0 users should run PWSETUP from the PATHWORKS server service directory. - When prompted for the "Network Adapter Information", choose 'Native' from the top=left menu window, then select '<Other Network Adapter>' from the network adapter menu. - Enter 'A:\PATHWRKS\DLLDE450.EXE' for the 'Driver Name' prompt. All the other procedures are same as EtherWORKS products. 6.) When running multiple protocols (LAT, LAD, etc.) with the native datalink driver, make sure DECnet (DNNETH.EXE) is always installed first. 7.) When loading the driver, the following command line switches may be used: /MODE:1|2|3 Force Medium port to TP|AUI|BNC mode. If not specified, the medium port is autosensed. /I:path Configure DECnet path. An example command line load (from the c:\> prompt) would be as follows: C:\> DLLDE450.EXE /MODE:1 /I C:\DECNET The native driver may be loaded without any command line parameters. In this case, the driver will auto-detect the adapter medium.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.