Thank you for purchasing an Epson printer. This document contains notes regarding
your new printer.
--------------------------------------------------------------------------------
README file for EPSON EPL Series Printer Driver
for Microsoft(R) Windows(R) 95, Windows(R) 98 and Windows NT(R) 4.0
--------------------------------------------------------------------------------
[Contents]
1. Introduction
2. Important legal information
3. Install notes
4. Notes regarding printing
--------------------------------------------------------------------------------
1. Introduction
This document contains information that you should be aware of when printing with
Windows.
2. Important legal information
Software called the EPSON EPL Series Printer Driver (the "Software") is provided
"AS IS." NO IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
PURPOSE ARE GIVEN.
The Software may be copied and distributed without charge only to users of EPSON
brand printers. All files on the disk must be copied without modification,
including all proprietary marks and notices. All components of the Software must
be distributed together. The Software may not be distributed for profit.
Copyright (c) 1998 SEIKO EPSON CORPORATION
3. Install notes
Run setup.exe in disk1 on each Operating System.
make sure that,
*all other applications are closed, and all print jobs are finished before
installing the printer driver.
*when asked by the install program whether you wish to "Keep existing driver" OR
"Replace existing driver", always select the replace option.
4. Notes regarding printing
(1) General
1) Results of printing by EPL-5700L might differ from other EPSON EPL Series
Printer.
2) When [Monitor the Printing Status] in [Utility] tab is not checked, some
errors are not found.
(2) Setting Up Drivers From Within Applications
Print setup is not available from within some applications. Setting print
conditions for the driver from these applications will have no effect on printing.
When using applications that do not support print setup, print only after setting
the driver print conditions from the Control Panel.
(3) Zoom Options Printing
The edges of the original may not be printed in the Zoom Options modes.
Make sure that sufficient space is available for the left, right, top and bottom
margins when printing in these modes.
(4) Euro Symbol Printing
The printer driver supports Euro Symbol with the following internal printer fonts;
Courier SWC
Dutch 801 SWM
Swiss 721 SWM
Dutch 801 SWC
Zapf Humanist 601 SWC
Ribbon 131 SWC
Clarendon Condensed SWC
Swiss 742 SWC
Swiss 742 Condensed SWC
Incised 901 SWC
Original Garamond SWC
Audrey Two SWC
Flareserif 821 SWC
Flareserif 821 Extra Bold SWC
Letter Gothic SWC
If you have problems print in Euro Symbols, check the Font Substitution Table in
the Font TAB of the printer driver and the printer's firmware version.
You can print Euro Symbols without using internal printer fonts if you have
screen fonts which support the Euro Symbol in your system.
To do that, change "TrueType fonts with substitution" to "Print TrueType fonts as
bitmap" in the Font TAB of the printer driver before you print.
--------------------------------------------------------------------------------
Microsoft is registered trademark and Windows is registered trademark of
Microsoft Corporation in the United States and other countries.
Product and Company names listed in this document are all registered trademarks
of their respective Companies.
--------------------------------------------------------------------------------
The following contains the latest information about your EPSON Status Monitor 3.
07/13/99
---------------------------------------------------------------------
1. General troubleshooting solutions
1-1. Notes for using EPSON Status Monitor 2 and EPSON Status Monitor 3
together
EPSON Status Monitor3 turns on monitoring of the following types of
connections, even if these settings are disabled by EPSON Status
Monitor 2.
* local printers
* LPR printers
* NetWare printers
* Windows shared printers
These settings should work most in cases.
If you install EPSON Status Monitor 2 and change the monitoring settings,
it will also change EPSON Status Monitor 3's settings. This
can cause problems printing and monitoring.
(Note) *If a particular communication protocol is not installed, the
monitor settings will not be enabled.
*To setup EPSON Status Monitor 3, please re-install your printer
driver.
1-2. If a Windows shared printer cannot be monitored, check that the following
settings have been made:
* Make sure that the printer driver is installed on the computer that is
hosting the Windows shared printer, that it is set to be shared, and
"Allow monitoring of shared printers" is selected in the
"Monitoring Preferences" of the printer driver.
* (Windows98/95 only) Open the "Network" icon in the control panel on the
computer that is sharing the printer, and check that File and Printer
Sharing for Microsoft Networks component is installed.
* (Windows98/95 only) As above, check that IPX/SPX-compatible Protocol is
NOT installed on either the client or server computers.
2. Solutions for Windows NT environment
2-1. When un-installing EPSON Status Monitor 3 from a multi-user Windows NT environment,
turn off the Shortcut Icon on all clients before un-installing. You can turn off
the Shortcut Icon in Monitoring Preferences.
2-2. When using a Windows NT 4.0 shared printer in a non-updated Windows NT environment,
if you check "Allow monitoring of shared printer", and then start EPSON Status Monitor
3, the Application Error Notice Window appears and you cannot monitor NetWare shared
printers. To avoid this problem, make sure you have installed Windows NT 4.0 Service
Pack 2 or later.
2-3. When using a Windows NT 4.0 shared printer, if you check "Allow monitoring of shared printer",
and then start EPSON Status Monitor 3, you cannot monitor a NetWare shared printer . To avoid
this problem open "Services" from the control panel, stop the EPSON Printer Status Agent
service, and start EPSON Status Monitor 3. After EPSON Status Monitor 3 has started, restart
the printer status service. You must do this each time you log into Windows NT 4.0.
2-4. In Windows NT, when connecting a shared printer on the server, be sure to do the
following to all client PCs:
*Clear the "Allow monitoring of shared printer" checkbox in the driver's Monitoring
Preferences window.
*Stop EPSON Net WebManager.
You need Administrator's privileges to change these settings.
See the EPSON Net WebManager User's Guide for more details.
3. Solutions for network printers
3-1. To monitor a NetWare printer, connect only one print server to
each queue. See your User's Guide for directions.
3-2. You cannot monitor a NetWare queue printer beyond the IPX router
because the setting for IPX hops is 0.
3-3. When monitoring NDS printers, the client supplied by Novell must
be used:
When using Windows NT: Novell IntranetWare Client for Windows NT
When using Windows 95: Novell IntranetWare Client 32 for Windows 95
3-4. To monitor an LPR printer in a Windows NT environment, set
only "Name or address of server providing lpd:" in the
"Add LPR compatible printer" dialog box for the LPR Port.
3-5. Monitoring NDPS printers
This product supports Netware printers configured by a queue-based
printing system such as Bindery or NDS server. You cannot monitor
NDPS (Novell Distributed Printing Services) printers.
---------------------------------------------------------------------
General notice: Product names used herein are for identification
purposes only and may be trademarks of their respective owners.
EPSON disclaims any and all rights in those marks.
(C)SEIKO EPSON Corp.1999
END
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.