; Portions Copyright (c) 1996-2001 National Semiconductor Corp. ; Copyright (c) 1996-2001 Microsoft Corporation. ; Copyright (c) 1996-2006 SMSC ; This INF is designed for installation as part of the NT CD. To change it to ; floppy based install, comment out any lines ending with "; CD only" ; and uncomment all lines ending with "; floppy only" [Version] Signature = "$Windows NT$" Provider = %SMC% Class = Infrared ClassGUID = {6bdd1fc5-810f-11d0-BEC7-08002BE2092F} DriverVer = 10/18/2006, 6.0.4000.1 CatalogFile = smscirda.cat [SourceDisksNames] ; floppy only 1 = %MediaDescription%,, ; floppy only [SourceDisksFiles] ; floppy only smscirda.sys = 1 ; floppy only [DestinationDirs] ; ; Specify destination directories for groups of files. ; '12' indicates the Windows drivers directory. ; '17' indicates the Windows Inf directory. ; DefaultDestDir=12 [SMC_CopySys] ; ; This section lists the source and destination names of files that need ; to be copied to the user's drive. The destination directory is given ; in the [DestinationDirs] section above. ; smscirda.sys,,,2 ; Do not Skip File [ControlFlags] ExcludeFromSelect= *SMCF010 ExcludeFromSelect= *SMCF020 ExcludeFromSelect= *SMCF030 [Manufacturer] ; ; Specify a name and devices section for each supported manufacturer that ; makes products of this class. ; ;x86 device section(s) %SMC% = SMC_Devices [SMC_Devices] ; ; This section describes the devices of this class made by a particular ; manufacturer which are supported on the x86 processor architecture ; The first descriptor, delimited by '%', is a symbolic string whose actual ; value is given in the [Strings] section below. ; %SMCF010.DeviceDesc% = SMCF010_ndi, *SMCF010 ; Generic SMC driver %SMCF020.DeviceDesc% = SMCF020_ndi, *SMCF020 ; ATI %SMCF030.DeviceDesc% = SMCF030_ndi, *SMCF030 ; Toshiba [SMCF010_ndi] DelReg = SMC_DelReg AddReg = SMC_AddReg,*SMCF010_AddReg,Dongle_Addreg,Speed_Addreg,Mode_Addreg,Turn_Addreg,Help_AddReg BusType = 14 Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI CopyFiles = SMC_CopySys [SMCF020_ndi] DelReg = SMC_DelReg AddReg = SMC_AddReg,*SMCF010_AddReg,Dongle_Addreg,Speed_Addreg,Mode_Addreg,Turn_Addreg,Help_AddReg,ForceDRQ_Addreg BusType = 14 Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI CopyFiles = SMC_CopySys [SMCF030_ndi] DelReg = SMC_DelReg AddReg = SMC_AddReg,*SMCF030_AddReg,Speed_Addreg,Mode_Addreg,Turn_Addreg,Help_AddReg ;don't display Xceiver choices BusType = 14 Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI CopyFiles = SMC_CopySys [SMCF010_ndi.Services] AddService= SMSCIRDA, 2, SMCIRDA.AddService, common.EventLog [SMCF020_ndi.Services] AddService= SMSCIRDA, 2, SMCIRDA.AddService, common.EventLog [SMCF030_ndi.Services] AddService= SMSCIRDA, 2, SMCIRDA.AddService, common.EventLog [SMC_AddReg] ; Interfaces HKR, Ndi, Service, 0, %SERVICESTATION% HKR, NDI\Interfaces, DefUpper, 0, ndisirda HKR, NDI\Interfaces, UpperRange, 0, ndisirda HKR, Ndi\Interfaces, DefLower, 0, nolower HKR, Ndi\Interfaces, LowerRange, 0, nolower HKR, Ndi, RequiredAll, 0, %MS_INTERFACE% [*SMCF010_AddReg] HKR,,BoardType,0,"3" HKR,NDI\params\Dongle_A_Type,default,,%SMCF010_DONGLE_A% HKR,NDI\params\MaxConnectRate,default,,%SMCF010_MAX_CONNECT% HKR,NDI\params\Xceiver_Turn,default,,%SMCF010_XCEIVER% HKR,NDI\params\TurnaroundTime,default,,%SMCF010_TURN% HKR,,Dongle_A_Type,0,%SMCF010_DONGLE_A% ; do this to force the value into the main registry key HKR,,MaxConnectRate,0,%SMCF010_MAX_CONNECT% HKR,,Xceiver_Turn,0,%SMCF010_XCEIVER% HKR,,TurnaroundTime,0,%SMCF010_TURN% [*SMCF030_AddReg] HKR,,BoardType,0,"3" HKR,NDI\params\MaxConnectRate,default,,%SMCF030_MAX_CONNECT% HKR,NDI\params\Xceiver_Turn,default,,%SMCF030_XCEIVER% HKR,NDI\params\TurnaroundTime,default,,%SMCF030_TURN% HKR,,Dongle_A_Type,0,%SMCF030_DONGLE_A% ;hardwired for HP transceiver HKR,,MaxConnectRate,0,%SMCF030_MAX_CONNECT% ; do this to force the value into the main registry key HKR,,Xceiver_Turn,0,%SMCF030_XCEIVER% HKR,,TurnaroundTime,0,%SMCF030_TURN% [Dongle_Addreg] ; ; These entries allow the user to select the Configuration Register ; from the dialog box AFTER INSTALLATION (under the 'Advanced' options). ; The user's selection is recorded in the registry and then read out ; by the smscirda.sys driver at boot time. ; HKR,NDI\params\Dongle_A_Type,ParamDesc,,%Dongle_A% HKR,NDI\params\Dongle_A_Type,flag,1,20,00,00,00 HKR,NDI\params\Dongle_A_Type,type,,enum HKR,NDI\params\Dongle_A_Type\enum,"0",,%DongleType_0% HKR,NDI\params\Dongle_A_Type\enum,"1",,%DongleType_1% HKR,NDI\params\Dongle_A_Type\enum,"2",,%DongleType_2% HKR,NDI\params\Dongle_A_Type\enum,"3",,%DongleType_3% HKR,NDI\params\Dongle_A_Type\enum,"4",,%DongleType_4% [Speed_Addreg] ; ; These entries allow the user to select the Configuration Register ; from dialog box AFTER INSTALLATION (under the 'Advanced' options). ; The user's selection is recorded in the registry and then read out ; by the smscirda.sys driver at boot time. ; HKR,NDI\params\MaxConnectRate,ParamDesc,,%MaxConnectRate% HKR,NDI\params\MaxConnectRate,type,,enum HKR,NDI\params\MaxConnectRate\enum,"4000000",,%MaxConnectRate_6% HKR,NDI\params\MaxConnectRate\enum,"1152000",,%MaxConnectRate_5% HKR,NDI\params\MaxConnectRate\enum,"115200",,%MaxConnectRate_4% HKR,NDI\params\MaxConnectRate\enum,"57600",,%MaxConnectRate_3% HKR,NDI\params\MaxConnectRate\enum,"38400",,%MaxConnectRate_2% HKR,NDI\params\MaxConnectRate\enum,"19200",,%MaxConnectRate_1% HKR,NDI\params\MaxConnectRate\enum,"9600",,%MaxConnectRate_0% [Mode_Addreg] ; ; These entries allow the user to select the Configuration Register ; from the dialog box AFTER INSTALLATION (under the 'Advanced' options). ; The user's selection is recorded in the registry and then read out ; by the smcirda.sys driver at boot time. ; HKR,NDI\params\Xceiver_Turn,ParamDesc,,%Xceiver_Turn% HKR,NDI\params\Xceiver_Turn,type,,enum HKR,NDI\params\Xceiver_Turn\enum,"0",,%HD_200% HKR,NDI\params\Xceiver_Turn\enum,"1",,%HD_300% HKR,NDI\params\Xceiver_Turn\enum,"2",,%FD_300% [Turn_Addreg] ; ; These entries allow the user to select the Configuration Register ; from dialog box AFTER INSTALLATION (under the 'Advanced' options). ; The user's selection is recorded in the registry and then read out ; by the smscirda.sys driver at boot time. ; HKR,NDI\params\TurnaroundTime,ParamDesc,,%TurnaroundTime% HKR,NDI\params\TurnaroundTime,type,,enum HKR,NDI\params\TurnaroundTime\enum,"10000",,%TurnaroundTime_3% HKR,NDI\params\TurnaroundTime\enum,"5000",,%TurnaroundTime_2% HKR,NDI\params\TurnaroundTime\enum,"1000",,%TurnaroundTime_1% HKR,NDI\params\TurnaroundTime\enum,"500",,%TurnaroundTime_0% [ForceDRQ_Addreg] HKR,,RxForceDrq,0,"1" ; Only for ATI chipset. [Help_Addreg] HKR,NDI,HelpText,0,%IRMINI_HELP% [SMC_DelReg] HKR,,EnumPropPages32 HKR,NDI\params\MaxSpeed HKR,NDI\params\MinTurnTime HKR,NDI\params\RxSel HKR,,AceTimer HKR,,AceTxTimer HKR,,DmaSingleMode HKR,,Dongle_A_Type HKR,,DuplexMode HKR,,Environment HKR,,MaxConnectRate HKR,,MaxSpeed HKR,,MinTurnTime HKR,,RxSel HKR,,RxForceDrq HKR,,ShowNegotiationFrames HKR,,SmcIrdaOptions HKR,,SpeedEnable HKR,,StuffFifo HKR,,TurnaroundTime HKR,,Xceiver_Turn HKR,NDI\params\MaxConnectRate HKR,NDI\params\Dongle_A_Type HKR,NDI\params\Xceiver_Turn HKR,NDI\params\TurnaroundTime [SMCIRDA.AddService] DisplayName = %SMCIRDA.ServiceDesc% ServiceType = 1 ; %SERVICE_KERNEL_DRIVER% StartType = 3 ; %SERVICE_DEMAND_START% ErrorControl = 1 ; %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\SMSCirda.sys ;12=drivers directory LoadOrderGroup = NDIS [common.EventLog] AddReg = common.AddEventLog.reg [common.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll" HKR, , TypesSupported, 0x00010001, 7 [Strings] ; ; This section defines symbolic string constants for use in the rest ; of the .inf script. You should create and use symbols for all ; translatable strings in order to make localization easier. ; Also, spaces within strings elsewhere in the script confuse infedit.exe; ; so use symbolic constants for any multi-word strings. ; MediaDescription = "IrDA miniport install disk" IRMINI_HELP="The IrDA infrared port. It can be used to establish wireless serial and network links to other computers." SMCIRDA.ServiceDesc="SMSC Infrared Device Driver" SMCF010.DeviceDesc="SMSC Fast Infrared Driver" SMCF020.DeviceDesc="SMSC Fast Infrared Driver" SMCF030.DeviceDesc="SMSC Fast Infrared Driver(IR module:HP)" V_CLASSNAME="Infrared adapters" SMC="SMSC" SERVICESTATION = "SMSCIRDA" MS_INTERFACE = "MS_IrDA" SMCF010_DONGLE_A = "0" SMCF010_MAX_CONNECT = "4000000" SMCF010_TURN = "1000" SMCF010_XCEIVER = "0" Dongle_A="Infrared Transceiver Type" SMCF030_DONGLE_A = "2" SMCF030_MAX_CONNECT = "4000000" SMCF030_TURN = "1000" SMCF030_XCEIVER = "0" DongleType_0="AUTO [Default]" DongleType_1="TEMIC" DongleType_2="HP" DongleType_3="Sharp" DongleType_4="VISHAY" MaxConnectRate_6 ="4 Mbps" MaxConnectRate_5 ="1.152 Mbps" MaxConnectRate_4 =" 115.2 kbps" MaxConnectRate_3 =" 57.6 kbps" MaxConnectRate_2 =" 38.4 kbps" MaxConnectRate_1 =" 19.2 kbps" MaxConnectRate_0 =" 9.6 kbps" TurnaroundTime_3 = "10.0 ms" TurnaroundTime_2 = " 5.0 ms" TurnaroundTime_1 = " 1.0 ms [Default]" TurnaroundTime_0 = " 0.5 ms" MaxConnectRate="Maxiumum Connect Rate" TurnaroundTime="Minimum Turnaround Time" Xceiver_Turn="Transceiver Turnaround Mode" HD_200="Mode 1:HD200 [Default]" HD_300="Mode 2:HD300" FD_300="Mode 3:FD300"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.