IBM ThinkPad April 22, 2003
ThinkPad Configuration package for Windows 95/98/98 SE/Me/2000/XP
Version A-1.33
========================================================================
What This Package Does
----------------------
This package contains the following small packages for
Windows 95/98/98 SE/Me/2000/XP users:
- IBM ThinkPad Configuration for Windows 95/98/98 SE/Me/2000/XP
- IBM ThinkPad Utility for DOS
- IBM ThinkPad Utility Data I for Windows 95/98/98 SE/Me/2000/XP
- IBM ThinkPad Utility Data II for Windows 95/98/98 SE/Me/2000/XP
- IBM ThinkPad Utility Data III for Windows 95/98/98 SE/Me/2000/XP
- IBM ThinkPad Utility Data IV for Windows 95/98/98 SE/Me/2000/XP
This package enables or updates the utility programs of the following
ThinkPad computers:
- ThinkPad 570, 570E
- ThinkPad 600, 600E, 600X
- ThinkPad 770, 770E, 770ED, 770X, 770Z
- ThinkPad A20m, A20p, A21e, A21m, A21p, A22m, A22p, A22e
- ThinkPad A30, A30p
- ThinkPad A31, A31p (*1)
- ThinkPad G40 (*7)
- ThinkPad R32 (*1), R40 (*3), R40e (*5)
- ThinkPad T20, T21, T22, T23, T30 (*2), T40 (*3), T40p(*4)
- ThinkPad X20, X21, X22, X23, X24
- ThinkPad X30 (*3), X31 (*3)
- ThinkPad i Series 1157 (*1)
- ThinkPad TransNote (*6)
(Note) *1: Supports Windows 98/98 SE/Me/2000/XP only.
*2: Supports Windows 98/98 SE/Me/2000/XP only.
Only the following T30 models support the Windows Me:
2366/2367-x1x, x2x, x3x, x4x, x5x, A6x and A7x except for
M1x, M2x, M3x, M4x and M5x.
*3: Supports Windows 98/98 SE/2000/XP only.
*4: Supports Windows 2000/XP only.
*5: Supports Windows XP only.
*6: Supports Windows 98 SE/Me/2000/XP only.
*7: Supports Windows 98 SE/2000/XP only.
Installation Instructions
-------------------------
NOTES:
- To determine if you should update the utility programs, refer to the
"Summary of Changes" section of each small package.
- ThinkPad Software Installer provides install/uninstall wizard for this package.
- Under Windows 95, Internet Explorer version 4 or higher must be
installed.
INSTALL:
1. Start Windows 95/98/98 SE/Me/2000/XP. For Windows 2000/XP, logon with
a User ID of Administrator.
2. Extract this package onto the hard drive.
3. Click Start and then click Run.
4. Type [Program Path]\SETUP, and click OK.
Program Path is the full path name where you extracted the package
in the step 2, and click OK.
5. Follow the instructions on the screen.
NOTE:
*1 From Version A-1.30, package structure was re-organized.
If you already installed "Utility package" for each operating system,
please uninstall it first before you install this package.
Then you need to install the following packages too.
ThinkPad 5xx/i-1157 :
- IBM ThinkPad Battery MaxiMiser and Power Management Features
package
ThinkPad 6xx/7xx :
- IBM ThinkPad Battery MaxiMiser and Power Management Features
package
- IBM ThinkPad Personalization Editor
The other ThinkPad machines :
- IBM ThinkPad Battery MaxiMiser and Power Management Features
package
- IBM ThinkPad Presentation Director (Windows 98/98 SE/Me/2000/XP or
later only)
- IBM ThinkPad EasyEject Utility (Win2000/XP or later only)
*2 From Version A-1.31, default installation folder name and modules to
be completely uninstalled were changed.
If you already installed previous version,you need to update all
the following packages too.
ThinkPad 5xx/i-1157 :
- IBM ThinkPad Battery MaxiMiser and Power Management Features
package
ThinkPad 6xx/7xx :
- IBM ThinkPad Battery MaxiMiser and Power Management Features
package
- IBM ThinkPad Personalization Editor
The other ThinkPad machines :
- IBM ThinkPad Battery MaxiMiser and Power Management Features
package
- IBM ThinkPad Presentation Director (Windows 98/98 SE/Me/2000/XP or
later only)
- IBM ThinkPad EasyEject Utility (Win2000/XP or later only)
*3 If you install newer version after uninstalling previous version
on Windows 2000/XP, reboot the system after uninstallation.
UNINSTALL:
Uninstalation is supported by Add/Remove Programs in Control Panel.
You have to logon with the user ID authorized as an administrator
on Windows 2000/XP.
Silent Installation Guide (for Unattended Installation support)
---------------------------------------------------------------
(Note)
This is for system administrators' use only.
When you type [Program Path]\SETUP in the above installation guide,
add "-S -SMS" parameter to SETUP.
(You need to type "[Program Path]\SETUP -S -SMS" in "Run...". )
========================================================================
IBM
ThinkPad Configuration for Windows 95/98/98 SE/Me/2000/XP
Version 1.33
========================================================================
What This Package Does
----------------------
This package provides the following utility programs:
- ThinkPad Configuration program
- Configuration Profile Wizard
This package enables or updates the utility programs of the following
ThinkPad computers:
- ThinkPad 570, 570E
- ThinkPad 600, 600E, 600X
- ThinkPad 770, 770E, 770ED, 770X, 770Z
- ThinkPad A20m, A20p, A21e, A21m, A21p, A22m, A22p, A22e
- ThinkPad A30, A30p, A31(*6), A31p
- ThinkPad R32, R40, R40e
- ThinkPad T20, T21, T22, T23, T30, T40, T40p
- ThinkPad X20, X21, X22, X23, X24
- ThinkPad X30, X31
- ThinkPad G40
- ThinkPad i Series 1157
- ThinkPad TransNote
Summary of supported programs, machines, and operating systems is
as follows:
- ThinkPad Configuration program
Supported on all machines
- Configuration Profile Wizard
Not supported on ThinkPad 5xx/6xx/7xx/i-1157
Not supported on Windows 95
Released Versions
-----------------
Version 1.30 Initial release
Version 1.31 Support for new systems
Version 1.31a A problem fix
Version 1.32 Support for new systems, new functions and problem fixes
Version 1.33 Support for new systems and a problem fix
Summary of Changes
------------------
Where: <n.nn> Version (for example, 1.00 means Version 1.00)
(New) New function or enhancement
(Fix) Correction to existing function
<1.30>
-(New) Package structure has been re-organized.
-(New) Support for ThinkPad X30.
-(Fix) Driver may cause an error on Windows 2000/XP.
<1.31>
-(New) Support for ThinkPad R40.
-(New) Support for uninstallation of all modules.
-(New) Changed default installation folder name.
-(New) Current tray icon's status is kept in overwrite installation.
<1.31a>
-(Fix) Installation may not complete on ThinkPad A21e.
<1.32>
-(New) Support for ThinkPad T40/T40p, X31, and R40e.
-(New) Support for Password Beep setting for T40/T40p, X31, and onwards.
-(New) Support for Security Information view for T40/T40p, X31, and
onwards.
-(New) Disabled ThinkPad Configuration tray icon in clean installation
by default.
-(Fix) Uninstallation may not complete correctly while some modules are
running.
<1.33>
-(New) Support for ThinkPad G40.
-(Fix) ThinkPad Configuration program may not start.
HOW TO DETERMINE WHAT VERSION IS INSTALLED:
1. Start the ThinkPad Configuration program. The main screen will be
displayed.
2. Select Help and then select About. About dialog will be displayed.
The version will be displayed next to Package.
========================================================================
IBM ThinkPad
Utility for DOS
Version 4.36
========================================================================
What This Package Does
-----------------------
This package provides the following utility programs:
- ThinkPad Configuration program for DOS
This package enables or updates the utility programs of the following
ThinkPad computers:
- ThinkPad 570, 570E
- ThinkPad 600, 600E, 600X
- ThinkPad A20m, A20p, A21e, A21m, A21p, A22m, A22p, A22e
- ThinkPad A30, A30p, A31, A31p
- ThinkPad R32, R40, R40e
- ThinkPad T20, T21, T22, T23, T30, T40, T40p
- ThinkPad X20, X21, X22, X23, X24, X30, X31
- ThinkPad G40
- ThinkPad i Series 1157
- ThinkPad TransNote
Released Versions
-----------------
Version 4.00 Support for new models and a new function
Version 4.01 A problem fix
Version 4.10 Support for new models
Version 4.11 Support for new models
Version 4.12 Support for new models, a new operating system and new
functions
Version 4.13 Support for new models
Version 4.14 Support for new models and new functions
Version 4.15 Support for new models
Version 4.15a A problem fix
Version 4.16 Support for new models, a new operating system and new
functions
Version 4.17 Support for new functions and a problem fix
Version 4.18 Support for new models
Version 4.19 Support for new models and a problem fix
Version 4.20 Support for new models
Version 4.20a Problem fixes
Version 4.20b Support for future enhancement
Version 4.21 Support for new models and new functions
Version 4.21s Support for new models
Version 4.22 Support for new models
Version 4.30 Support for new models
Version 4.31 Support for new models and new functions
Version 4.32 Support for new models and a problem fix
Version 4.33 Support for new models
Version 4.34 Support for new models
Version 4.35 Support for new models
Version 4.36 Support for new models
Summary of Changes
------------------
Where: <n.nn> Version (for example, 1.00 means Version 1.00)
(New) New function or enhancement
(Fix) Correction to existing functions
<4.00>
-(New) Support for ThinkPad 770.
-(New) Changed the PS2 program name from ThinkPad Features ThinkPad
Configuration.
<4.01>
-(Fix) ThinkPad 770 might not boot up after updating Personalization
data.
<4.10>
-(New) Support for ThinkPad new models.
<4.11>
-(New) Support for ThinkPad 600, 770E and 770ED.
<4.12>
-(New) Support for ThinkPad new models.
-(New) Support for Windows NT.
-(New) Support for FAT32 file system in installation.
-(New) Support for version information.
-(New) Support for CPU Power Management and PCI BUS Power Management
settings.
<4.13>
-(New) Support for ThinkPad 770X and 600E.
<4.14>
-(New) Support for ThinkPad 770Z.
-(New) Utility packages have been re-organized.
In installation, there is no need to do from a diskette.
This package does not contain Personalization related modules.
<4.15>
-(New) Support for ThinkPad 570.
<4.15a>
-(Fix) PS2 PMode command is not correct on ThinkPad 570.
<4.16>
-(New) Support for ThinkPad 600X/570E.
-(New) Installation Program for OS/2 is supported.
-(Fix) Interrupt is not correctly disable in PCI IRQ command.
-(Fix) Parallel EPP mode is not set correctly on 570 family.
<4.17>
-(New) A command for a new processor is supported on DOS/Windows 3.1.
-(New) Required memory size is reduced.
-(Fix) A command for Presentation Mode displays different status
from the other utilities.
<4.18>
-(New) Support for ThinkPad A20m/A20p/T20.
<4.19>
-(New) Support for ThinkPad X20.
-(Fix) PS2.EXE needs big memory size to run.
<4.20>
-(New) Support for ThinkPad A21e/m/p and T21.
<4.20a>
-(Fix) "PS2 ? SCreen" command displays wrong help description.
-(Fix) INSTUTD2.EXE does not work.
Both fixes are for 4.20 release only.
4.19 user does not need to upgrade to 4.20a.
<4.20b>
-(New) Support for T21 future enhancement.
<4.21>
-(New) Support for ThinkPad A22m, A22p, T22 and X21.
-(New) Support for "PS2 BEEP Lidclose" command parameter for A2x/T2x
family.
<4.21s>
-(New) Support for ThinkPad TransNote.
<4.22>
-(New) Support for ThinkPad A22e.
<4.30>
-(New) Support for ThinkPad T23, A30, A30p and X22.
<4.31>
-(New) Support for ThinkPad A31 and A31p.
-(New) PREFMemory command is supported on Windows NT.
<4.32>
-(New) Support for ThinkPad T30 and R32..
-(Fix) PS2 TImer and POwer commands reset settings each other.
<4.33>
-(New) Support for ThinkPad X30.
<4.34>
-(New) Support for ThinkPad R40.
<4.35>
-(New) Support for ThinkPad T40/T40p, X31, and R40e.
<4.36>
-(New) Support for ThinkPad G40.
Installation Guide
------------------
HOW TO DETERMINE WHAT VERSION IS INSTALLED:
1. Open DOS screen.
2. Execute PS2 ?.
3. The version will be displayed next to 'Utility for DOS' on the
second line.
========================================================================
IBM ThinkPad
Utility Data I for Windows 95/98/98 SE/Me/2000/XP
Version 1.14
========================================================================
What This Package Does
-----------------------
This package contains bitmap data files and setup files for ThinkPad
utility programs.
This package updates the files of the following ThinkPad computers:
- ThinkPad 600, 600E, 600X
- ThinkPad 770, 770E, 770ED, 770X, 770Z
- ThinkPad A21e(model 2655), A22e
- ThinkPad T20, T21, T22, T23, T30, T40, T40p
Released Versions
-----------------
Version 1.00 Initial release
Version 1.10 Support for new functions
Version 1.11 Support for new models
Version 1.12 Support for new functions
Version 1.13 Support for new models and a problem fix
Version 1.14 Support for new models
Summary of Changes
------------------
Where: <n.nn> Package version (for example, 1.00 means Version 1.00)
(New) New function or enhancement
(Fix) Correction to existing function
(Restrictions) Remaining restrictions
<1.00>
-(New) Initial release for ThinkPad 770X and 600E.
<1.10>
-(New) DLL format is supported.
<1.11>
-(New) Support for ThinkPad T2x family.
<1.12>
-(New) Support for new bitmaps for ThinkPad T2x and A2x family.
<1.13>
-(New) Support for new bitmaps for ThinkPad T3x family.
-(Fix) Quick help of ThinkPad Configuration main screen may be cut off
when large font is selected.
<1.14>
-(New) Support for ThinkPad T40/T40p.
New header bitmap is used.
Installation Guide
------------------
HOW TO DETERMINE WHAT VERSION IS INSTALLED:
1. Start the ThinkPad Configuration program. The main screen will be
displayed.
2. Select 'Help' -> 'About...' menu. 'About' dialog will be displayed.
3. The version will be displayed next to 'Package (Data)'.
========================================================================
IBM ThinkPad
Utility Data II for Windows 95/98/98 SE/Me/2000/XP
Version 1.15
========================================================================
What This Package Does
-----------------------
This package contains bitmap data files and setup files for ThinkPad
utility programs.
This package updates the files of the following ThinkPad computers:
- ThinkPad A20m, A20p, A21e, A21m, A21p, A22m, A22p
- ThinkPad A30, A30p, A31, A31p
- ThinkPad R32, R40, R40e
Released Versions
-----------------
Version 1.00 Initial release
Version 1.10 Support for new functions
Version 1.11 Support for new models
Version 1.12 Support for new models and new functions
Version 1.13 Support for new models and a problem fix
Version 1.14 Support for new models
Version 1.15 Support for new models
Summary of Changes
------------------
Where: <n.nn> Package version (for example, 1.00 means Version 1.00)
(New) New function or enhancement
(Fix) Correction to existing function
(Restrictions) Remaining restrictions
<1.00>
-(New) Initial release.
<1.10>
-(New) DLL format is supported.
<1.11>
-(New) Support for ThinkPad A2x family.
<1.12>
-(New) Support for ThinkPad A30 and A30p.
-(New) Support for new bitmaps.
<1.13>
-(New) Support for ThinkPad R32.
-(Fix) Quick help of ThinkPad Configuration main screen may be cut off
when large font is selected.
<1.14>
-(New) Support for ThinkPad R40.
New header bitmap is used.
<1.15>
-(New) Support for ThinkPad R40e.
Installation Guide
------------------
HOW TO DETERMINE WHAT VERSION IS INSTALLED:
1. Start the ThinkPad Configuration program. The main screen will be
displayed.
2. Select 'Help' -> 'About...' menu. 'About' dialog will be displayed.
3. The version will be displayed next to 'Package (Data)'.
========================================================================
IBM ThinkPad
Utility Data III for Windows 95/98/98 SE/Me/2000/XP
Version 1.16
========================================================================
What This Package Does
----------------------
This package contains bitmap data files and setup files for ThinkPad
utility programs.
This package updates the files of the following ThinkPad computers:
- ThinkPad 570, 570E
- ThinkPad X20, X21, X22, X23, X24
- ThinkPad X30, X31
- ThinkPad i Series 1157
Released Versions
-----------------
Version 1.00 Initial release
Version 1.01 Support for new models
Version 1.10 Support for new functions
Version 1.11 Support for new models
Version 1.12 Support for new models
Version 1.13 Support for new functions
Version 1.14 A problem fix
Version 1.15 Support for new models
Version 1.16 Support for new models
Summary of Changes
------------------
Where: <n.nn> Version (for example, 1.00 means Version 1.00)
(New) New function or enhancement
(Fix) Correction to existing function
<1.00>
-(New) Initial release.
<1.01>
-(New) Support for ThinkPad 570.
<1.10>
-(New) DLL format is supported.
-(New) Add ThinkPad i Series 1157 into the support list.
<1.11>
-(New) Support for ThinkPad X20 and X21.
<1.12>
-(New) Support for ThinkPad X22.
<1.13>
-(New) Support for new bitmaps.
<1.14>
-(Fix) Quick help of ThinkPad Configuration main screen may be cut off
when large font is selected.
<1.15>
-(New) Support for ThinkPad X30.
<1.16>
-(New) Support for ThinkPad X31.
New header bitmap is used.
Installation Guide
------------------
HOW TO DETERMINE WHAT VERSION IS INSTALLED:
1. Start the ThinkPad Configuration program. The main screen will be
displayed.
2. Select 'Help' -> 'About...' menu. 'About' dialog will be displayed.
3. The version will be displayed next to 'Package (Data)'.
========================================================================
IBM ThinkPad
Utility Data IV for Windows 95/98/98 SE/Me/2000/XP
Version 1.03
========================================================================
What This Package Does
----------------------
This package contains bitmap data files and setup files for ThinkPad
utility programs.
This package updates the files of the following ThinkPad computers:
- ThinkPad TransNote
Released Versions
-----------------
Version 1.01 Initial release
Version 1.02 A problem fix
Version 1.03 Support for new models
Summary of Changes
------------------
Where: <n.nn> Version (for example, 1.00 means Version 1.00)
(New) New function or enhancement
(Fix) Correction to existing function
<1.00>
-(New) Initial release for ThinkPad TransNote.
<1.01>
-(New) Support for new bitmaps.
<1.02>
-(Fix) Quick help of ThinkPad Configuration main screen may be cut off
when large font is selected.
<1.03>
-(New) Support for ThinkPad G40.
Installation Guide
------------------
HOW TO DETERMINE WHAT VERSION IS INSTALLED:
1. Start the ThinkPad Configuration program. The main screen will be
displayed.
2. Select 'Help' -> 'About...' menu. 'About' dialog will be displayed.
3. The version will be displayed next to 'Package (Data)'.
========================================================================
Trademarks
----------
* IBM, OS/2 and ThinkPad are registered trademarks of IBM Corporation.
* Microsoft, Windows and Windows NT are registered trademarks of
Microsoft Corporation.
Other company, product, and service names may be registered trademarks,
trademarks or service marks of others.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.