;
; Installation inf file for My Cinema U-Series Infrared receiver driver
; Copyright 2007, ASUSTeK
[Version]
Signature = "$CHICAGO$"
Class = HIDClass
ClassGuid = {745a17a0-74d3-11d0-b6fe-00a0c90f57da}
Provider = %ASUS%
DriverVer = 03/15/2007,2.0.1.1
CatalogFile.NTamd64 = u3khrc64.cat
;=====================================================================
[SourceDisksNames]
1 = %INSTALLATION_DISK%,,,,,
[SourceDisksFiles]
u3khrc64.sys = 1
[DestinationDirs]
MODRC64_CopyFilesSys = 12,
[ControlFlags]
ExcludeFromSelect = *
ExcludeFromSelect.NT = *
;=====================================================================
[Manufacturer]
%MfgName% = ASUSTeK, NTamd64
[ASUSTeK.NTamd64]
%MODRC_DeviceDesc% = MODRC64, HID\VID_0B05&PID_1721&FN_01
%MODRC_DeviceDesc% = MODRC64, HID\VID_0B05&PID_1736&FN_01
;=====================================================================
[MODRC64.NT]
CopyFiles = MODRC64_CopyFilesSys
AddReg = MODRC64_AddReg
[MODRC64.NT.Services]
AddService = u3khrc64,0x00000002,MODRC64_ServiceInstall,,,
[MODRC64.NT.HW]
AddReg = MODRC_HW_AddReg
[MODRC64_CopyFilesSys]
u3khrc64.sys
[MODRC64_AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,u3khrc64.sys
[MODRC64_ServiceInstall]
DisplayName = %MODRC_FriendlyName%
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\u3khrc64.sys
;=====================================================================
[MODRC_HW_AddReg]
HKR,,"ReportDescriptor",0x00000001,\
\ ; Consumer Controls
0x05, 0x0c, \ ; Usage Page (Consumer Controls),
0x09, 0x01, \ ; Usage (Consumer Control),
0xA1, 0x01, \ ; Collection (Application),
0x85, 0x02, \ ; Report Id (1)
0x19, 0x00, \ ; Usage Minimum (0),
0x2a, 0x3c, 0x02, \ ; Usage Maximum (23c)
0x15, 0x00, \ ; Logical Minimum (0),
0x26, 0x3c, 0x02, \ ; Logical Maximum (23c)
0x95, 0x01, \ ; Report Count (1),
0x75, 0x10, \ ; Report Size (16),
0x81, 0x00, \ ; Input (Data, Array),
0xC0, \ ; End Collection
\ ; MS Vendor controls
0x06, 0xbc, 0xff, \ ; Usage Page (Vendor 0xffbc),
0x09, 0x88, \ ; Usage (88),
0xa1, 0x01, \ ; Collection (Application),
0x85, 0x04, \ ; Report Id (2)
0x19, 0x01, \ ; Usage Minimum (0x01),
0x29, 0xff, \ ; Usage Maximum (0xff),
0x15, 0x00, \ ; Logical Minimum (0),
0x25, 0x01, \ ; Logical Maximum(1),
0x95, 0x01, \ ; Report Count (1),
0x75, 0x08, \ ; Report Size (8),
0x81, 0x00, \ ; Input (Data, Array),
0xc0, \ ; End Collection
\ ; Standby button
0x05, 0x01, \ ; Usage Page (Generic Desktop),
0x09, 0x80, \ ; Usage (System Control),
0xa1, 0x01, \ ; Collection (Application),
0x85, 0x03, \ ; Report Id (3)
0x19, 0x81, \ ; Usage Minimum (0x81),
0x29, 0x83, \ ; Usage Maximum (0x83),
0x25, 0x01, \ ; Logical Maximum(1),
0x75, 0x01, \ ; Report Size (1),
0x95, 0x03, \ ; Report Count (3),
0x81, 0x02, \ ; Input
0x75, 0x01, \ ; Report Size (1),
0x95, 0x05, \ ; Report Count (5),
0x81, 0x01, \ ; Input (Constant),
0xC0, \ ; End Collection
\ ; Keyboard
0x05, 0x01, \ ; Usage Page (Generic Desktop),
0x09, 0x06, \ ; Usage (Keyboard),
0xA1, 0x01, \ ; Collection (Application),
0x85, 0x01, \ ; Report Id (4)
0x05, 0x07, \ ; usage page key codes
0x19, 0xe0, \ ; usage min left control
0x29, 0xe8, \ ; usage max keyboard right gui
0x75, 0x01, \ ; report size 1
0x95, 0x08, \ ; report count 8
0x81, 0x02, \ ; input (Variable)
0x19, 0x00, \ ; usage min 0
0x29, 0x90, \ ; usage max 91
0x26, 0xff, 0x00, \ ; logical max 0xff
0x75, 0x08, \ ; report size 8
0x95, 0x01, \ ; report count 1
0x81, 0x00, \ ; Input (Data, Array),
0xC0 \ ; End Collection
HKR,,"ReportDataSize",0x00010001,0x00000003
HKR,,"ReportMappingTable",0x00000001,\
0x01,0xC4,0xC0,0x14, 0x0B, 0x01,0x00,0x51, \ ; down arrow
0x01,0xC4,0xC0,0x12, 0x0B, 0x01,0x00,0x52, \ ; up arrow
0x01,0xC4,0xC0,0x1A, 0x0B, 0x01,0x00,0x4f, \ ; right arrow
0x01,0xC4,0xC0,0x0C, 0x0B, 0x01,0x00,0x50, \ ; left arrow
0x01,0xC4,0xC0,0x13, 0x0B, 0x01,0x00,0x28, \ ; return
0x01,0xC4,0xC0,0x17, 0x0B, 0x01,0x04,0x3d, \ ; Close
0x01,0xC4,0xC0,0x15, 0x0B, 0x01,0x04,0x28, \ ; FULL Screen
0x01,0xC4,0xC0,0x1D, 0x0B, 0x01,0x01,0x0F, \ ; Recall
\
0x01,0xC4,0xC0,0x19, 0x0B, 0x02,0x24,0x02, \ ; AC Back
\
0x01,0xC4,0xC0,0x11, 0x0B, 0x02,0xb0,0x00, \ ; AC Media play
0x01,0xC4,0xC0,0x11, 0x0B, 0x02,0xb1,0x00, \ ; AC Media pause
0x01,0xC4,0xC0,0x16, 0x0B, 0x02,0xb2,0x00, \ ; AC Media record
0x01,0xC4,0xC0,0x18, 0x0B, 0x02,0xb3,0x00, \ ; AC FF
0x01,0xC4,0xC0,0x0A, 0x0B, 0x02,0xb4,0x00, \ ; AC RW
0x01,0xC4,0xC0,0x10, 0x0B, 0x02,0xb7,0x00, \ ; AC Media Stop
\
0x01,0xC4,0xC0,0x0D, 0x0B, 0x02,0xe9,0x00, \ ; AC volume up
0x01,0xC4,0xC0,0x0E, 0x0B, 0x02,0xea,0x00, \ ; AC volume down
0x01,0xC4,0xC0,0x0F, 0x0B, 0x02,0xe2,0x00, \ ; AC volume mute
\
0x01,0xC4,0xC0,0x1B, 0x0B, 0x02,0x9c,0x00, \ ; AC channel up
0x01,0xC4,0xC0,0x1C, 0x0B, 0x02,0x9d,0x00, \ ; AC channel down
\
0x01,0xC4,0xC0,0x0B, 0x04, 0x04,0x01,0x00, \ ; eHome launch
0x01,0xC4,0xC0,0x09, 0x04, 0x04,0x02,0x00 \ ; My TV
HKR,,"KeyEmulationMask",0x00000001,\
0xFF,0x00,0x00 ; No Event
HKR,,"SkipRepeatCounter",0x00010001,0x00000004
HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Remote Controls","HID\VID_0B05&PID_1721&FN_01",0x00000000,"" ; For Media Center compatibility only
;=====================================================================
[Strings]
ASUS = "ASUSTeK COMPUTER INC."
MfgName = "ASUSTeK COMPUTER INC."
MODRC_DeviceDesc = "Infrared Receiver"
MODRC_FriendlyName = "ASUS Infrared Receiver"
INSTALLATION_DISK = "ASUS My Cinema U3000 Hybrid Installation Disk"
SERVICE_KERNEL_DRIVER = 0x1
SERVICE_DEMAND_START = 0x3
SERVICE_ERROR_NORMAL = 0x1
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.