*****************************************************************************
* SMC Networks, Inc. *
* SMC EZ Card 10/100 (SMC1244TX V2) *
* Netware Server ODI Driver Installation Overview *
* *
* Copyright (C) 2002 SMC Networks, Inc. *
* All Rights Reserved. *
*****************************************************************************
Contents of the file:
=====================
A) Driver Installation for Netware Server 4.11, 5.0
B) Driver Installation for Netware Server 3.12, 4.10
C) Driver Installation for DOS32
D) Driver Installation for Microsoft Windows 3.x
E) Driver Installation for Microsoft Windows 95 OSR2
F) Parameters Description for FastNIC.LAN
A) Driver Installation for NetWare Server 4.11, 5.0
================================================
1. Change directory to NetWare Server directory (for example:
CD\NWSERVER )
2. Load NetWare Server System by typing SERVER, then press <Enter>.
3. When the Server prompt appears, load the NetWare Server
Installation Utility. That is,
:LOAD INSTALL <- If you use NetWare 4.11
:LOAD NWCONFIG <- If you use Netware 5
4. Select "Driver options" from "Installtion Options" menu, then
press <Enter>.
5. Select "Configure network drivers" from "Driver Options" menu,
then press <Enter>.
6. Select "Select a driver" from "Additional Driver Actions" menu,
then press <Enter>.
7. Press <Ins> to install an unlisted driver, then press <F3> to
specify a different path.
8. Insert SMC EZ Card 10/100 (SMC1244TX V2) Driver Diskette
to your PC's floppy drive and specify the drive (A: or B:).
9. Select "SMC EZ Card 10/100 (SMC1244TX V2)" from "Select a driver to
installed:" menu, then press <Enter>.
10. If necessary, select "Select/Modify driver parameters and
protocols" from "Board FastNIC_1 (Driver FastNIC) Actions" menu,
then press <Enter> to set up the driver parameters. (Please refer
to content E.)
Otherwise, select "Save parameters and load driver", then press
<Enter>.
11. Following instructions to complete the driver installation.
12. Sample AUTOEXEC.NCF for NetWare Server
AUTOEXEC.NCF (one board)
========================
LOAD C:FastNIC FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:FastNIC FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:FastNIC FRAME=ETHERNET_II NAME=E_II
LOAD C:FastNIC FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
AUTOEXEC.NCF (two boards)
=========================
LOAD C:FastNIC SLOT=1 FRAME=ETHERNET_802.2 NAME=E_8022_1
LOAD C:FastNIC SLOT=1 FRAME=ETHERNET_802.3 NAME=E_8023_1
LOAD C:FastNIC SLOT=1 FRAME=ETHERNET_II NAME=E_II_1
LOAD C:FastNIC SLOT=1 FRAME=ETHERNET_SNAP NAME=E_SNAP_1
LOAD C:FastNIC SLOT=2 FRAME=ETHERNET_802.2 NAME=E_8022_2
LOAD C:FastNIC SLOT=2 FRAME=ETHERNET_802.3 NAME=E_8023_2
LOAD C:FastNIC SLOT=2 FRAME=ETHERNET_II NAME=E_II_2
LOAD C:FastNIC SLOT=2 FRAME=ETHERNET_SNAP NAME=E_SNAP_2
BIND IPX E_8022_1 NET=10
BIND IPX E_8023_1 NET=20
BIND IPX E_II_1 NET=30
BIND IPX E_SNAP_1 NET=40
BIND IPX E_8022_2 NET=50
BIND IPX E_8023_2 NET=60
BIND IPX E_II_2 NET=70
BIND IPX E_SNAP_2 NET=80
B) Driver Installation for Netware Server 3.12, 4.10
=================================================
B.1 Driver Installation for NetWare Server 3.12
1. Insert Driver Diskette in your PC's floppy drive (A: or B:).
2. Change to the NetWare Server directory (for example: CD\SERVER.312)
3. Copy the following files from Driver Diskette to the NetWare
Server directory.
\NETWARE\312NLM\NBI31X.NLM
\NETWARE\312NLM\MSM31X.NLM
\NETWARE\312NLM\ETHERTSM.NLM
\NETWARE\FASTNIC.LAN
4. Sample AUTOEXEC.NCF for NetWare Server 3.12
AUTOEXEC.NCF
============
LOAD C:NBI31X
LOAD C:MSM31X
LOAD C:ETHERTSM
LOAD C:FASTNIC FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:FASTNIC FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:FASTNIC FRAME=ETHERNET_II NAME=E_II
LOAD C:FASTNIC FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
B.2 Driver Installation for NetWare Server 4.10
1. Insert Driver Diskette in your PC's floppy drive (A: or B:).
2. Change to the NetWare Server directory (for example: CD\NWSERVER)
3. Copy the following files from Driver Diskette to the NetWare
Server directory.
\NETWARE\410NLM\NBI.NLM
\NETWARE\410NLM\MSM.NLM
\NETWARE\410NLM\ETHERTSM.NLM
\NETWARE\FASTNIC.LAN
4. Sample AUTOEXEC.NCF for NetWare Server 4.10
AUTOEXEC.NCF (one board)
========================
LOAD C:NBI
LOAD C:MSM
LOAD C:ETHERTSM
LOAD C:FASTNIC FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:FASTNIC FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:FASTNIC FRAME=ETHERNET_II NAME=E_II
LOAD C:FASTNIC FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
AUTOEXEC.NCF (two boards)
=========================
LOAD C:NBI
LOAD C:MSM
LOAD C:ETHERTSM
LOAD C:FASTNIC SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1
LOAD C:FASTNIC SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1
LOAD C:FASTNIC SLOT=3 FRAME=ETHERNET_II NAME=E_II_1
LOAD C:FASTNIC SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1
LOAD C:FASTNIC SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2
LOAD C:FASTNIC SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2
LOAD C:FASTNIC SLOT=4 FRAME=ETHERNET_II NAME=E_II_2
LOAD C:FASTNIC SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2
BIND IPX E_8022_1 NET=10
BIND IPX E_8023_1 NET=20
BIND IPX E_II_1 NET=30
BIND IPX E_SNAP_1 NET=40
BIND IPX E_8022_2 NET=50
BIND IPX E_8023_2 NET=60
BIND IPX E_II_2 NET=70
BIND IPX E_SNAP_2 NET=80
C) Driver Installation for DOS32
=============================
1. If you have completed installed the Netware Client 32 for DOS, all you
have to do is to modify STARTNET.BAT. Please see the sample STARTNET.BAT
below the installation instructions.
2. In DOS environment, run "INSTALL" from Netware 4.11 CD root directory.
Follow the installation steps of Novell NetWare Client 32.
- When "Select the type of installation desired" window appears, select
"Client Installation".
- When "Select Client to be installed" window appears, select "NetWare
Client 32 for DOS and Windows 3.1x"
- When the product manual appears, mark the "Netware Client 32 for DOS"
item, then press <Enter>.
3. In "32-Bit Network Board Drivers" window, select "USER SPECIFIED 32 BIT
DRIVER".
4. Insert SMC EZ Card 10/100 (SMC1244TX V2) Driver Diskette into your floppy
diskette drive, then specify the driver path like A:\NETWARE.
5. Select "SMC EZ Card 10/100 (SMC1244TX V2)", then press <Enter>.
6. Refer to Content E) and set the correct driver parameters to comply
with your network environment, then press <F10> to continue.
7. Following instructions to complete the Client32 for DOS software
installation.
8. Reboot your machine.
Sample STARTNET.BAT for DOS32.
==============================
SET NWLANGUAGE=ENGLISH
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\FastNIC.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\FastNIC.LAN FRAME=ETHERNET_802.3
LOAD C:\NOVELL\CLIENT32\FastNIC.LAN FRAME=ETHERNET_II
LOAD C:\NOVELL\CLIENT32\FastNIC.LAN FRAME=ETHERNET_SNAP
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
D) Driver Installation for Microsoft Windows 3.x
=============================================
Please refer to Content B), in step 2, mark "Netware Client 32 for DOS"
and "NetWare Client 32 for Windows", then following step 3..8 to complete
the installation.
E) Driver Installation for Microsoft Windows 95 OSR2
=================================================
If you have installed the Microsoft Client in your Windows 95 system,
you should remove the adapter object and NDIS3 driver of the SMC EZ
Card 10/100 (SMC1244TX V2) from the Windows 95 system and delete
C:\WINDOWS\INF\FASTNIC.INF file.
Install Novell NetWare Client 32 for Windows 95 OSR2
----------------------------------------------------
1. Plug SMC1244TX V2 into one of the Master PCI slots of your PC.
2. Turn the PC power ON and then boot from Windows 95.
3. Windows 95 will prompt "PCI Ethernet Controller" in "New Hardware Found"
dialog box. Please click on "Cancel" and do not install driver now.
4. In WIN95 environment, run "SETUP.EXE" in the Netware 4.11 CD named
\PRODUCTS\WIN95\IBM_ENU directory. Follow the installation steps of
Novell NetWare Client 32.
5. In "Select Device" window, please select "[detected net drivers]" and
click on "OK" button to follow the installation steps of Client 32.
(Please do not click "Have Disk..." to install adapter driver now.)
6. After following the instructions to complete the Client32 for WIN95
software installation, reboot your machine.
Install Driver After Novell NetWare Client 32 for Windows 95 is Installed
-------------------------------------------------------------------------
1. Make sure Novell NetWare Client 32 is installed OK and then install SMC
EZ Card 10/100 (SMC1244TX V2) Driver again. When the PC is powered on,
Windows 95 will prompt "PCI Ethernet Controller" in "New Hardware Found"
dialog box. (If your adapter is not detected by Windows 95, refer to
TroubleShooting below.)
2. Remove the SMC EZ Card 10/100 (SMC1244TX V2) Driver Diskette in your floppy drive.
Click on "Next" button and do not let WIN95 search adapter driver.
3. Insert the SMC EZ Card 10/100 (SMC1244TX V2) Driver Diskette in your floppy drive.
Click "Other Locations" and type "A:\NETWARE", then click "OK" button.
The message "SMC EZ Card 10/100 (SMC1244TX V2)" will appear.
4. After the "Finish" button is clicked, Windows starts to copy files from
Windows 95 CD-ROM to your hard disk. When the "Copying Files" dialogue
shows up to request the directory for the "FASTNIC.LAN" file, type
"A:\NETWARE" and click on the "OK" button.
5. Follow the screen's prompt to insert "NetWare Client 32 for Windows 95"
disk and click the OK button in the "Insert Disk" dialog box.
6. Otherwise enter the full pathname (ex. D:\PRODUCTS\WIN95\IBM_ENU) of
the "NetWare Client 32 for Windows95" installation files in the
"Copying Files....." dialog box, then click the OK button.
7. Follow the screen's prompt to insert the "Windows 95 CD-ROM" and click
the OK button in the "Insert Disk" dialog box.
8. Otherwise enter the full pathname of the "Windows 95 CD-ROM" installation
files in the "Copying Files..." dialog box, then click the OK button.
9. Windows 95 will copy the driver (FASTNIC.LAN) from A:\NETWARE to
C:\NOVELL\CLIENT32 directory.
10. Remove the SMC1244TX V2 Driver Diskette from your floppy drive.
11. Restart your computer to initialize the network function.
NOTE:
- C:\NOVELL is the directory where your Novell Client 32 files are located.
- C:\WINDOWS is the directory where your Windows 95 O.S. is located.
- Do not remove "Novell ODINSUP" from the Network control panel. Removing
Novell ODINSUP also removes NetWare Client 32 for Windows 95 if there
is only one adapter in use.
TroubleShooting in Windows 95
-----------------------------
If your adapter is not detected by Windows 95 "New Hardware Found", your
adapter may be already REGISTERED. Therefore, you have to remove the
REGISTERED before you install adapter driver again.
Method:
1. Click "Network" icon in the "Control Panel" box to make sure your
adapter driver not installed. If your adapter driver was installed,
remove it.
2. Select "Start" button (left-down corner) and select "Run" item.
Type REGEDIT, the registry edidor utility , then click "OK" button to
execute it.
3. In the Registry Editor dialogue, double-click "HKEY_LOCAL_MACHINE" item,
double-click "Enum", then double-click PCI item. Select the
"VEN_1317&DEV_0985", then delete it. Close Register Editor dialogue.
4. Reboot Windows 95 again to carefully follow the installtion procedures
above again.
F) Parameter Description for FastNIC.LAN
=====================================
The following parameters are used in FastNIC.LAN.
1. SLOT: specifies which adapter is enabled when multiple LAN adapters
are found in your computer.
Ex: LOAD FastNIC SLOT=1 FRAME=ETHERNET_802.2
LOAD FastNIC SLOT=1 FRAME=ETHERNET_II
2. FRAME : specifies which frame type is used by the driver. Accepted
values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
Ethernet_SNAP. Multiple frame types can be enabled by the
driver by loading the same driver with different FRAME types.
Ex: LOAD FastNIC FRAME=ETHERNET_802.2
LOAD FastNIC FRAME=ETHERNET_802.3
LOAD FastNIC FRAME=ETHERNET_II
LOAD FastNIC FRAME=ETHERNET_SNAP
3. NODE : Use a different address to replace the node address burned
in EEPROM.
Ex: LOAD FastNIC NODE=0200E8001122
4. There are five parameters provided for specifying adapter's speed and
duplex mode : AUTO, 10-HD, 10-FD, 100-HD and 100-FD.
Ex: LOAD FastNIC 100-HD FRAME=Ethernet_802.2 NAME=LAN_A
BIND IPX TO LAN_A NET=11
---
All trademarks and brand names mentioned belong to their
respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.