DME560T Ethernet/Fax/Modem May 1996
IBM Lan Support and Lan Services Installation
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
IBM Lan Support 2.x (see below for Lan Services 4.x)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Please use Method 1 or 2 for this installation
Method 1 -- Using the .NIF file:
Insert the LAN Support diskette in Drive A.
Run the install program.
A:\> DXMAID [Enter]
The following message then appears:
"Do you have driver diskettes?" [Yes]
Use the Spacebar to switch between "no" and "yes".
After copying LAN Support, specify the drive and path of the
DOS NDIS files.
For example: A:\NDIS2 [Enter]
The installation procedure terminates after copying the
necessary file.
Method 2 -- Modifying the contents of the CONFIG.SYS and
PROTOCOL.INI files after installing other NICs:
Copy the LMNDIS.DOS file to the directory where your IBM LAN
Support program resides.
Modify the NDIS device driver statement in the CONFIG.SYS
as follows:
DEVICE = [drive]:\path\LMNDIS.DOS
Modify the PROTOCOL.INI file as follows:
BINDINGS = DME560TIBM_NIF
:
:
[DME560TIBM_NIF]
DRIVERNAME = LMNDIS$
IBM LAN Services v4.x
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Execute the installation program from the IBM DOS LAN SERVICES
diskette
Type: >a:\install
From the Network card field, select "Network card not shown in list
below...".
Specify the path for the corresponding oemsetup.inf file of the OEM
driver intended for use. Then, press Enter. The program then
displays the driver name.
Check that the driver configuration is correct.
Complete the installation, restart your system to use the DOS LAN
Services.
Support Options
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
We are consistently improving and upgrading our drivers. you are
welcomed at any time to browse through our BBS, and download any
drivers, utilities and help files.
If you still cannot get the DME560T working properly, our
technical experts are always ready to help. Please be at your
computer, have your DME560T, Drivers Disk, and the following
information available:
* Version number of CARDEN.EXE or any drivers you are
running
* The extact text of any error message displayed on your screen
* The type of computer
* The type of network
For technical support, you may contact your authorized D-Link
distributor, dealer, or the following D-Link headquarters:
In U.S.A. Tel: +1(949)455-1688 Fax: +1(949)455-2521
BBS: +1(949)455-1779 BBS: +1(949)455-9616
In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669
BBS: +1(905)828-6673
In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500
BBS: +44(181)235-5511
In Germany Tel: +49(6196)643011 Fax: +49(6196)28049
BBS: +49(6196)28378
In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299
BBS: +886(2)910-1835
In France Tel: +33(1)30238688 Fax: +33(1)3028689
In Australia Tel: +61(2)4177100 Fax: +61(2)4171077
BBS: +61(2)4173711
In Nordic Tel: +46(40)163330 Fax: +46(40)163340
BBS: +46(40)163343
In Singapore Tel: +657746233 Fax: +657746322
BBS: +657744787
In China Tel: +86(10)4934175 Fax: +86(10)4991648
In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352
In India Tel: +91(22)6172478 Fax: +91(22)6172476
The BBS communication setup information is as follows :
Speed: 2400-14400 baud - Germany
2400-9600 baud - Asia,Taiwan
14400-16800 baud - Canada
9600-14400 baud V32, V32bis, V42, V42bis - U.S.A.
2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe
Parity: None
Data bits: 8
Stop bit : 1
Copyrights, Trademarks, and Disclaimers
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
rights reserved by Microsoft Corporation
All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.