DME560T Ethernet/Fax/Modem May 1996
Banyan Vines Installation
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the PCMCIA drivers are working
properly. Getting Started will describe the installation for Banyan.
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
There are two methods of copying files from the Banyan VINES
workstation to the bootable diskette or subdirectory on the hard
disk.
Method 1:
Execute the 'INSTALL' command included in the diskette labeled
"VINES MASTER DISK".
Follow the given instructions for copying files.
Method 2:
Execute the 'BAN' command.
Login to VINES system.
Execute the 'PCCOPY' command.
Select the 'NDIS Ethernet' option and follow the instructions
for copying files.
Insert the driver program diskette in Drive A and the prepared
bootable diskette in Drive B. Then, copy the appropriate NDIS
driver file LMNDIS.DOS from Drive A to Drive B or to the
subdirectory of the hard disk.
Create a CONFIG.SYS file with the following statements:
DEVICE=PROTMAN.DOS /I:A:\
DEVICE=LMNDIS.DOS
NOTE: A:\ is the path where Banyan VINES workstation files
reside.
Create a LMNDIS.NIF file containing the following statements:
Model = Intelligent Ethernet Fax/Modem Card
Path = ETHERNET\LM28
DeviceDriver = LMNDIS.DOS
DeviceName = LMNDIS$
Type = NDIS
XPorts = NETBEUI
NOTE: A:\ is the path where Banyan VINES workstation files
reside.
Create a PROTOCOL.INI file with the following lines:
[PROTOCOL MANAGER]
drivername = PROTMAN$
[VINES_XIF]
drivername = NDISBAN$
bindings = DME560T_NIF
[DME560T_NIF]
drivername = LMNDIS$
Execute the 'PCCONFIG' command.
A "CONFIGURING A PC FOR THE NETWORK" message appears on the
screen. The program then provides some options you can select.
Select "1 - Network Card Settings".
Another screen appears for selecting some options.
Select "NDIS Ethernet".
Select the appropriate configuration of the adapter.
After configuring the adapter, you return to the main screen.
Select "2 - Login Environment Settings".
From the next screen, select "NDIS Ethernet".
The 'PCCONFIG.DB' file will then be created.
Reboot your computer.
Login to VINES by executing the 'BAN' command.
Support Options
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
We are consistently improving and upgrading our drivers. you are
welcomed at any time to browse through our BBS, and download any
drivers, utilities and help files.
If you still cannot get the DME560T working properly, our
technical experts are always ready to help. Please be at your
computer, have your DME560T, Drivers Disk, and the following
information available:
* Version number of CARDEN.EXE or any drivers you are
running
* The extact text of any error message displayed on your screen
* The type of computer
* The type of network
For technical support, you may contact your authorized D-Link
distributor, dealer, or the following D-Link headquarters:
In U.S.A. Tel: +1(949)455-1688 Fax: +1(949)455-2521
BBS: +1(949)455-1779 BBS: +1(949)455-9616
In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669
BBS: +1(905)828-6673
In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500
BBS: +44(181)235-5511
In Germany Tel: +49(6196)643011 Fax: +49(6196)28049
BBS: +49(6196)28378
In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299
BBS: +886(2)910-1835
In France Tel: +33(1)30238688 Fax: +33(1)3028689
In Australia Tel: +61(2)4177100 Fax: +61(2)4171077
BBS: +61(2)4173711
In Nordic Tel: +46(40)163330 Fax: +46(40)163340
BBS: +46(40)163343
In Singapore Tel: +657746233 Fax: +657746322
BBS: +657744787
In China Tel: +86(10)4934175 Fax: +86(10)4991648
In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352
In India Tel: +91(22)6172478 Fax: +91(22)6172476
The BBS communication setup information is as follows :
Speed: 2400-14400 baud - Germany
2400-9600 baud - Asia,Taiwan
14400-16800 baud - Canada
9600-14400 baud V32, V32bis, V42, V42bis - U.S.A.
2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe
Parity: None
Data bits:8
Stop bit :1
Copyrights, Trademarks, and Disclaimers
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
rights reserved by Microsoft Corporation
All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.