DME560T Ethernet/Fax/Modem May 1996
Lantastic AI V. 5.x & 6.x
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
This installation assumes that the DME560T adapter is working
properly. Please consult \README.TXT for help with the adapter
set-up. Getting Started will describe the installation instructions.
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Lantastic AI 5.0 Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Using NDIS driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
For Lantastic 5.0 the DME560T uses the NDIS 2.0 driver.
Users can replace AEXNDIS.DOS with "LMNDIS.DOS" allowing
Install Lantastic AI 5.0, during the installation select
the Artisoft AE2 NDIS driver (AEXNDIS.DOS).
Edit the system's C:\CONFIG.SYS and make the following changes.
CONFIG.SYS
ÄÄÄÄÄÄÄÄÄÄ
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Artisoft
* please replace to *
DEVICE=C:\LANTASTI\LMNDIS.DOS -------> By DME560T
Edit the system's C:\LANTASTI\STARTNET.SYS and make the
following changes.
ÉÍNoteÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º If you are using PROTMAN.DOS V1.x, you must use the º
º NO_BIND option on the AI-NDIS command line in the º
º STARTNET.BAT, and you must run NETBIND.EXE V1.x º
º before AILANBIO.EXE. º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
STARTNET.BAT
ÄÄÄÄÄÄÄÄÄÄÄÄ
C:\LANTASTI\AI-NDIS BIND_TO=AEXNDIS_NIF
* please replace to *
C:\LANTASTI\AI-NDIS BIND_TO=LMNDIS_NIF
Edit the system's C:\LANTASTI\PROTOCOL.INI and make the
following changes.
PROTOCOL.INI
ÄÄÄÄÄÄÄÄÄÄÄÄ
[AEXNDIS_NIF]
DRIVERNAME = AEXNDIS$
* please replace to *
[LMNDIS_NIF]
DRIVERNAME = LMNDIS$
Lantastic 6.0 Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
New Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
To install D-Link NDIS driver "LMNDIS.DOS",
-Install Lantastic
-Select "NDIS support for network adapters"
-Insert the DME560T Driver Disk into Drive A:
-The install program will ask for the driver path,
type the path "A:\LANTASTI".
-Install program will load, "LMNDIS.DOS" and "PROTOCOL.INI",
to target directory.
Existing Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
For Lantastic 6.x the DME560T uses the NDIS 2.0 driver.
Users can replace AEXNDIS.DOS with "LMNDIS.DOS" allowing
Edit the system's C:\CONFIG.SYS and make the following changes.
CONFIG.SYS
ÄÄÄÄÄÄÄÄÄÄ
DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Artisoft
* please replace to *
DEVICE=C:\LANTASTI\LMNDIS.DOS -------> By DME560T
Edit the system's C:\LANTASTI\STARTNET.SYS and make the
following changes.
STARTNET.BAT
ÄÄÄÄÄÄÄÄÄÄÄÄ
AI-NDIS BIND_TO=AEXNDIS_NIF
* please replace to *
AI-NDIS BIND_TO=LMNDIS_NIF
Edit the system's C:\LANTASTI\PROTOCOL.INI and make the
following changes.
PROTOCOL.INI
ÄÄÄÄÄÄÄÄÄÄÄÄ
[NETBEUI_XIF]
DriverName = netbeui$
Sessions = 6
NCBS = 12
-------------------------------------------------------
Bindings = AEXNDIS_NIF -----> By Artisoft
* please replace to *
Bindings = LMNDIS_NIF -----> By DME560T
-------------------------------------------------------
LANABASE = 1
-------------------------------------------------------
[AEXNDIS_NIF]
DRIVERNAME = AEXNDIS$ -----> By Artisoft
* please replace to *
[LMNDIS_NIF]
DRIVERNAME = LMNDIS$ -----> By DME560T
-------------------------------------------------------
Using ODI DOS driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Users can use "LMODI.COM" driver to replace NRODI.COM
Artisoft's which is the ODI for DOS driver.
Install Lantastic AI 5.0, during the installation select
the Artisoft Node Runner ODI driver (NRODI.COM).
ÉÍÍNoteÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º The LMODI.COM following HSM v4.0 spec, please º
º backup LSL.COM, IPXODI.COM that were installed with º
º Lantastic. Copy both drivers for the DME560T driver º
º disk A:\LANTASTI\LSL.COM, IPXODI.COM to c:\LANTASTI. º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Edit the system's C:\LANTASTI\STARTNET.SYS and make the
following changes.
STARTNET.BAT
ÄÄÄÄÄÄÄÄÄÄÄÄ
@echo ===== Begin Lantastic configuration =====
SET LAN_CFG=C:\LANTASTI
PATH C:\LANTASTI;%PATH%
SET LAN_DIR=C:\LANTASTI.NET
SET NWDBPATH=C:\Lantasti\NW
LSL --> Please use release driver diskette
NRODI --> Please replace with LMODI
ODINSUP
IPXODI --> Please use release driver diskette
------------------------------------------------------
AI-NDIS BIND_TO=NRODI -----> By Artisoft
* please replace to *
AI-NDIS BIND_TO=LMODI -----> By DME560T
------------------------------------------------------
AILANBIO @STARTNET.CFG
REDIR LANTA @STARTNET.CFG
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\LANTA
@echo ===== End LANtastic configuration =====
Edit the system's C:\LANTASTI\NET.CFG and make the
following changes.
NET.CFG
ÄÄÄÄÄÄÄ
Please add the following lines to the NET.CFG file.
Link Driver LMODI
Frame Ethernet_802.3
Support Options
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
We are consistently improving and upgrading our drivers. you are
welcomed at any time to browse through our BBS, and download any
drivers, utilities and help files.
If you still cannot get the DME560T working properly, our
technical experts are always ready to help. Please be at your
computer, have your DME560T, Drivers Disk, and the following
information available:
* Version number of CARDEN.EXE and any drivers you are running
* The extact text of any error message displayed on your screen
* The type of computer
* The type of network
For technical support, you may contact your authorized D-Link
distributor, dealer, or the following D-Link headquarters:
In U.S.A. Tel: +1(949)455-1688 Fax: +1(949)455-2521
BBS: +1(949)455-1779 BBS: +1(949)455-9616
In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669
BBS: +1(905)828-6673
In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500
BBS: +44(181)235-5511
In Germany Tel: +49(6196)643011 Fax: +49(6196)28049
BBS: +49(6196)28378
In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299
BBS: +886(2)910-1835
In France Tel: +33(1)30238688 Fax: +33(1)3028689
In Australia Tel: +61(2)4177100 Fax: +61(2)4171077
BBS: +61(2)4173711
In Nordic Tel: +46(40)163330 Fax: +46(40)163340
BBS: +46(40)163343
In Singapore Tel: +657746233 Fax: +657746322
BBS: +657744787
In China Tel: +86(10)4934175 Fax: +86(10)4991648
In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352
In India Tel: +91(22)6172478 Fax: +91(22)6172476
The BBS communication setup information is as follows :
Speed: 2400-14400 baud - Germany
2400-9600 baud - Asia,Taiwan
14400-16800 baud - Canada
9600-14400 baud V32, V32bis, V42, V42bis - U.S.A.
2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe
Parity: None
Data bits: 8
Stop bit : 1
Copyrights, Trademarks, and Disclaimers
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All documents and DME560T drivers are Copywritten to
Copyright (c) 1996 by D-Link Corporation. All rights reserved.
All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
rights reserved by Microsoft Corporation
All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.