\HELP\NETWARE\NW41X.TXT NETGEAR FA330/FA331 PCI Adapter ------------------------------- Driver Installation for Novell NetWare Server version 4.1X ---------------------------------------------------------- Upgrading NetWare 4.10 Server software -------------------------------------- The provided NetWare 4.10 server drivers for FA330/FA331 follows the Novell ODI Driver Specification version 3.3, and is capable of supporting requests from legacy DOS client and the new clients issuing client32 requests. As a result, the version 4.10 NetWare server software must be patched to work with this driver. The patching method is described below as part of the installation procedure. The Novell NetWare 4.11 server software is already capable of supporting ODI Specification 3.3 driver. No patching is necessary. With either version 4.10 of 4.11 of Novell NetWare, you have a choice of following the auto install procedure from Novell or manually modifying the AUTOEXEC.NCF file to load the necessary NLM files and driver. Installation Procedure ---------------------- 1. If you have Novell NetWare ver 4.10, execute LSWAP in the 32BITLAN directory at MS-DOS prompt to upgrade the NetWare 4.10 server software. Skip this step if you have NetWare 4.11. > LSWAP A:\NETWARE\SERVER\NW41X\LOADER.EXE C:\NWSERVER\SERVER.EXE Usage: LSWAP [loaderFilePath [serverFilePath]] Default loaderFilePath = C:\NWSERVER\LOADER.EXE Default serverFilePath = C:\NWSERVER\SERVER.EXE 2. From this point onward, you have a choice of running the auto install program from Novell NetWare or manually modifying the AUTOEXEC.NCF file. Running Auto Install from Novell NetWare ---------------------------------------- 1. Boot up the Novell Server. 2. After booting up, execute "LOAD INSTALL". Type: : load install 3. Select "Driver Option" and then press Enter. 4. Select "Configure network drivers" and then press Enter. 5. Select "Load a driver" and then press Enter. 6. Press the <Ins> key to install an unlisted driver. 7. Press <F3> to specify a different path, provide the path where the FA33X.LAN driver resides and hit Enter. eg. A:\ 8. Select "FA33X.LAN" to start the installation procedure. 9. Select "Yes" when asked if you want to copy driver FA33X.LAN. 10. Select "Yes" when asked if you want to save existing ETHERTSM.NLM. 11. Select "Yes" when asked if you want to save existing NBI.NLM. 12. Select "Yes" when asked if you want to save existing MSM.NLM. 13. Choose the "Select/Modify driver parameters and protocols" selection and move the cursor to the FA33X_1 parameters window to change the the slot number. A slot number must be entered before the installation can proceed. You can make the slot number 1. Even though the slot number may not be correct, the FA33X.LAN driver automatically find the FA330/FA331 card and load the proper slot number. You do not have to enter any value for media and line speed or the Node address. The driver can use the default value for these parameters. 14. Choose "Save parameters and load driver" to start the driver loading process. 15. Hit <Enter> when a Network number is provided to bind IPX to the FA33X_1 adapter card (frame Ethernet_802.2). 16. Hit <Enter> when a Network number is provided to bind IPX to the FA33X_1 adapter card (frame Ethernet_SNAP). 17. Hit Enter when a Network number is provided to bind IPX to the FA33X_1 adapter card (frame Ethernet_II). 18. Hit Enter when a Network number is provided to bind IPX to the FA33X_1 adapter card (frame Ethernet_802.3). All four supported Ethernet frames types are loaded. 19. Select No when asked if you want to select an additional Network driver. 20. Select "Return to the previous menu" in the Additional Driver Actions window. 21. Hit <Esc> a number of times to exit to the Install main menu. Select "Yes" when asked if you want to exit INSTALL. 22. When existing to the main, the FA330/FA331 driver is already loaded for the adapter card. Manually modifying Software on an existing NetWare 4.1X Server -------------------------------------------------------------- 1. Copy the FA33X.LAN file into the subdirectory of your server. For example: > COPY A:\NETWARE\SERVER\NW41X\FA33X.LAN C:\NWSERVER 2. Copy the following NLM files into your server directory. > COPY A:\NETWARE\SERVER\NW41X\NBI.NLM C:\NWSERVER > COPY A:\NETWARE\SERVER\NW41X\MSM.NLM C:\NWSERVER > COPY A:\NETWARE\SERVER\NW41X\ETHERTSM.NLM C:\NWSERVER 3. Run SERVER.EXE on the server. 4. At the NetWare prompt, enter "Load Install" to edit the AUTOEXEC.NCF file. : load install Select <System Option> Select <Edit Autoexec.NCF file> 5. Add the following lines to the AUTOEXEC.NCF file: load C:\NWSERVER\NBI.NLM load C:\NWSERVER\MSM.NLM load C:\NWSERVER\ETHERTSM.NLM load C:\NWSERVER\FA33X.LAN frame=Ethernet_yyyy name=FA33X_1_zzz ;zzz is a unique 3-digit number ; for every frame type loaded. ;yyyy is the Ethernet frame type. bind ipx FA33X_1_zzz net=xxxx ;xxxx is the network number (eg. 33) 6. Press the <Esc> key when done editing. Select "Yes" to save. 7. Select "Exit" to exit NetWare Configuration. 8. Reboot the server system. The driver is now installed. Parameters supported by the FA33X.LAN driver -------------------------------------------- SLOT 1 - Forces the driver to search for the specified board LineSpeed - Select connection type of the NETGEAR FA330/FA331 PCI Adapter card. = 1 Auto-Negotiation = 2 Line speed = 10 = 3 Line speed = 100 FDUP - Select the duplex mode of the adapter card. This parameter works only when LineSpeed is not set to Auto- Negotiation. = 1 Full duplex on = 2 Full duplex off > LOAD C:\NWSERVER\FA33X.LAN LineSpeed=2 FDUP=1 Troubleshooting --------------- If you experience the "Command Line Parameter for FA33X" warning message when STARTNET.BAT is executed, provide the slot number at the command line in STARTNET.BAT as illustrated below. > LOAD C:\NOVELL\CLIENT32\FA33X.LAN FRAME=ETHERNET_802.3 SLOT=1 SLOT must be the correct value as found by the driver. Sample AUTOEXEC.NCF file ------------------------ #Load the NLM files on Netware 4.1X server #----------------------------------------- load c:\nwserver\nbi load c:\nwserver\msm load c:\nwserver\ethertsm #Working with FA33X driver (one PCI card) #---------------------------------------- load c:\nwserver\FA33X frame=ethernet_ii name=e1 load c:\nwserver\FA33X frame=ethernet_802.2 name=e2 load c:\nwserver\FA33X frame=ethernet_802.3 name=e3 bind ipx to e1 net=10 bind ipx to e2 net=20 bind ipx to e3 net=30 #Working with FA33X driver (multiple PCI cards) #---------------------------------------------- #load c:\nwserver\FA33X frame=ethernet_ii name=e5 slot=1 ; card #1 #load c:\nwserver\FA33X frame=ethernet_802.2 name=e6 slot=1 ; card #1 #load c:\nwserver\FA33X frame=ethernet_802.3 name=e7 slot=1 ; card #1 #bind ipx to e5 net=100 #bind ipx to e6 net=200 #bind ipx to e7 net=300 #load c:\nwserver\FA33X frame=ethernet_ii name=e5 slot=2 ; card #2 #load c:\nwserver\FA33X frame=ethernet_802.2 name=e6 slot=2 ; card #2 #load c:\nwserver\FA33X frame=ethernet_802.3 name=e7 slot=2 ; card #2 #bind ipx to e5 net=50 #bind ipx to e6 net=60 #bind ipx to e7 net=70Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.