1. nc100.exe Driver
2. LANTASTI.TXT File Contents

LANTASTI.TXT Driver File Contents (nc100.exe)

*****************************************************************************
                  
              Network Everywhere Fast Ethernet Adapter (NC100 v2)

                   NDIS 2 Driver for LANtastic Installation
                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

           Copyright (C) 2000 Network Everywhere
                             All rights reserved.
*****************************************************************************


  Content:
  --------

      A) Install Network Everywhere NC100 drivers for LANtastic 5.0
      B) Install Network Everywhere drivers for LANtastic 6.0


A) Install Network Everywhere drivers for LANtastic 5.0
======================================================================

  LANtastic 5.0 can support following driver: NDIS driver


Using NDIS driver
-----------------
  For NDIS driver, Network Everywhere provides the
  "NC100.DOS" driver for Network Everywhere Fast Ethernet Adapter (NC100 v2). 
  You can use "NC100.DOS" driver to replace AEXNDIS.DOS which is the
  NDIS driver offered by ARTISOFT.

  Example  -----  CONFIG.SYS

    DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
    DEVICE=C:\LANTASTI\NC100.DOS -----> By Network Everywhere


  Example  -----  AUTOEXEC.BAT / STARTNET.BAT

    C:\LANTASTI\AI-NDIS BIND_TO=NC100_NIF
    C:\LANTASTI\AILANBIO
    C:\LANTASTI\REDIR MachineName


  Example  -----  PROTOCOL.INI

    [PROTMAN]
       DRIVERNAME = PROTMAN$
       DYNAMIC = YES

    [NC100_NIF]
       DRIVERNAME = NC100$

  Comments:
    If you are using PROTMAN.DOS V1.x, you must use the NO_BIND
    option on the AI-NDIS command line in the STARTNET.BAT,
    and you need to run NETBIND.EXE V1.x before AILANBIO.EXE.


B) Install Network Everywhere drivers for LANtastic 6.0
======================================================================

  LANtastic 6.0 can support following driver: NDIS driver


Using NDIS driver
-----------------

  To install Network Everywhere's NDIS driver "NC100.DOS",
  you can use the LANtastic 6.0  install program, and select "NDIS support
  for network adapters" then insert Network Everywhere's
  Network Everywhere Fast Ethernet Adapter (NC100 v2) driver diskette, and type path
  "A:\NDIS\DOS". The Install program will search for "NC100.DOS" and
  "PROTOCOL.INI" and copy these two files to the target directory.

  If you already installed LANtastic 6.0 and need to install
  Network Everywhere Fast Ethernet Adapter (NC100 v2), just replace
  AEXNDIS.DOS with Network Everywhere's NDIS driver
  "NC100.DOS" at CONFIG.SYS

  "NC100.DOS"; an NDIS driver which supported by Network Everywhere
  "AEXNDIS.DOS"; an NDIS driver which supported by ARTISOFT


  Example  -----  CONFIG.SYS

    DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
    DEVICE=C:\LANTASTI\NC100.DOS -------> By Network Everywhere


  Example  -----  AUTOEXEC.BAT / STARTNET.BAT

    @echo ===== Begin LANtastic configuration =====
    SET LAN_CFG=C:\LANTASTI
    PATH C:\LANTASTI;%PATH%
    SET LAN_DIR=C:\LANTASTI.NET

    rem Please obtain the NETBEUI.EXE program from Microsoft
    NETBEUI
    AI-NDIS BIND_TO=AEXNDIS_NIF
    AILANBIO @STARTNET.CFG
    REDIR THOMAS @STARTNET.CFG

    SERVER C:\LANTASTI.NET @STARTNET.CFG
    NET LOGIN \\THOMAS
    @echo ===== End LANtastic configuration =====


  Example  -----  Protocol.ini

    [PROTMAN]
      Priority=NETBEUI
      DriverName = PROTMAN$
      Dynamic = Yes

    [NETBEUI_XIF]
      DriverName = netbeui$
      Sessions = 6
      NCBS = 12
      Bindings = NC100_NIF
      LANABASE = 1

    [NC100_NIF]
      DriverName = NC100$



All trademarks or brand names mentioned are properties of their respective
companies.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.