1. BCOM_WAN_V20_Utilities_A.exe Driver
2. hwdiags.ini File Contents

hwdiags.ini Driver File Contents (BCOM_WAN_V20_Utilities_A.exe)

# Sample hwdiags.ini
# See Readme.txt for the full list of the supported parameters

# BCM4211/4212/4413
DEVICE_TYPE=21

# BCM4402/4307/4309/4710
#DEVICE_TYPE=25

# BCM412X on Intel AC'97 chipset
#DEVICE_TYPE=15

# BCM412X on VIA AC'97 chipset
#DEVICE_TYPE=16

# DUT Specific
DEVICE_ID=4212
VENDOR_ID=14E4
SUBSYSTEM_ID=0001
SUBSYSTEM_VENDOR_ID=1028

# Must be disabled if running in Windows DOS-Prompt
IRQ_ASSERT_TEST=N
INTL_SUPPORT=Y
INTL_TEST=Y

# Phone line connection required if enabled 
ISOCAP_LOOPBACK_TEST=Y
ANALOG_LOOPBACK_TEST=Y
HYBRID_LOOPBACK_TEST=Y
FRE_LOOPBACK_TEST=Y

# Enable for faster testing. Will not run redundant loops
FAST_LOOPBACK_SCHEME=N

# Calibrated for TLS-3B
;ANALOG_LOOPBACK_TEST_THRESHOLD=40
;HYBRID_LOOPBACK_TEST_THRESHOLD=40
;ISOCAP_LOOPBACK_TEST_THRESHOLD=57
;DIGITAL_LOOPBACK_TEST_THRESHOLD=57

# Calibrated for TLS-5
;ANALOG_LOOPBACK_TEST_THRESHOLD=36
;HYBRID_LOOPBACK_TEST_THRESHOLD=28,-28,17,-17
;ISOCAP_LOOPBACK_TEST_THRESHOLD=55
;DIGITAL_LOOPBACK_TEST_THRESHOLD=55
;FRE_BAND_MAG_RANGES=250,3281.5,-5,5
;FRE_NOTCH_MAG_RANGE=-500,-30
;MIN_LOOP_CURRENT=3
;LOCAL_NUMBER=101

# Calibrated for Party-Line
;HYBRID_LOOPBACK_TEST_THRESHOLD=30
;ANALOG_LOOPBACK_TEST_THRESHOLD=30
;ISOCAP_LOOPBACK_TEST_THRESHOLD=57
;DIGITAL_LOOPBACK_TEST_THRESHOLD=57
;FRE_BAND_MAG_RANGES=312.5,3281.5,-6,5
;FRE_NOTCH_MAG_RANGE=-500,-20
;LOCAL_NUMBER=200-0010
;MAX_LOOP_CURRENT=80
;INTERNAL_MODEM_INIT_STRING=AT%^1S502.27=1

# Calibrated for Ring-it
;ANALOG_LOOPBACK_TEST_THRESHOLD=30
;HYBRID_LOOPBACK_TEST_THRESHOLD=30
;ISOCAP_LOOPBACK_TEST_THRESHOLD=57
;DIGITAL_LOOPBACK_TEST_THRESHOLD=57
;FRE_BAND_MAG_RANGES=250,3281.5,-3,2
;FRE_NOTCH_MAG_RANGE=-500,-20
;LOCAL_NUMBER=555-5555
;MAX_LOOP_CURRENT=60
;INTERNAL_MODEM_INIT_STRING=AT%^1S502.27=1

# Calibrated for random telephone line
ANALOG_LOOPBACK_TEST_THRESHOLD=-10,25,25,-100
HYBRID_LOOPBACK_TEST_THRESHOLD=-10,25,25,-100
ISOCAP_LOOPBACK_TEST_THRESHOLD=-10,25,25,-100
DIGITAL_LOOPBACK_TEST_THRESHOLD=55
FRE_BAND_MAG_RANGES=500,3281.5,-100,50
FRE_NOTCH_MAG_RANGE=-500,0
MIN_LOOP_CURRENT=0
MAX_LOOOP_CURRENT=120

# External modem connection required. Comment out if external modem not available
;EXTERNAL_MODEM_COM_PORT=1

# Dual Codec Testing. Set to Y if audio codec present
AUDIO_TEST=N

AUDIO_FRE_LOOPBACK_TEST=Y
AUDIO_ANALOG_LOOPBACK_TEST=Y
AUDIO_DIGITAL1_LOOPBACK_TEST=Y
AUDIO_DIGITAL2_LOOPBACK_TEST=Y

AUDIO_ANALOG_LOOPBACK_TEST_THRESHOLD=45
AUDIO_DIGITAL1_LOOPBACK_TEST_THRESHOLD=45
AUDIO_DIGITAL2_LOOPBACK_TEST_THRESHOLD=53

#SWAP
SPEAKER_MUTE=Y
STOP_ON_FAILURE=N