\HELP\WINNT\NT40.TXT NETGEAR FA411 PCMCIA Mobile Adapter ------------------------------------- Driver Installation for Microsoft Windows NT 4.0 ------------------------------------------------ Getting Started --------------- Microsoft Windows NT 4.0 does not come bundled with the driver for the NETGEAR FA411 PCMCIA Mobile Adapter. You must go through the following procedure to install the device driver into the Windows NT system for the adapter to function correctly. The Windows NT installation disks or CD are needed to complete this installation. Installation Procedure ---------------------- 1. Insert the NETGEAR FA411 PCMCIA Mobile Adapter into an available PCMCIA slot in your notebook computer and power on your system. 2. You will need to know the available "IO Port" and "IRQ Number" on your computer. Follow these steps to find the available IO Port and IRQ number: a. Click on the "Start" button at the Windows NT desktop. b. Select "Program", and "Administrative Tools". c. Select "Windows NT Diagnostics" under "Administrative Tools". d. Choose the "Resources" folder. e. Click on the "IRQ" button at the bottom of the Diagnostics window. Make a note of the IRQ numbers in use. f. Click on the "I/O Port" button to check on the I/O ports already used up by other resources in your system. 3. Close the Diagnostics window. 4. Double-click on the "My Computer" icon at the desktop. 5. Double-click on the "Control Panel" icon under "My Computer". 6. In the "Control Panel" window, double-click on the "Network" icon. 7. In the "Network" window, click on the "Adapter". 8. Click the [Add] button. A list of all available drivers will be displayed. 9. In the "Select Network Adapter" window, click on the [Have Disk] button for third-party adapters not included in the list. 10. Insert the FA411 Driver and Documentation CD-ROM into the CD-ROM drive. Enter "D:\" when prompted for a path and click OK. Windows NT will attempt to locate the OEMSETUP.INF file in the specified path. 11. Make sure that "NETGEAR FA411 PCMCIA Mobile Adapter" is highlighted. Click OK in the Select OEM Option window. 12. Windows NT will pop up one window asking for the value of some keywords including "I/O Port", "IRQ Number" and "Connection Type" Check and make sure that the selected I/O port and IRQ nubmer are not already in use by your system. The default value of "Connection Type" is "AutoSense". The driver will auto-detect the connecting media type. Other possible connection type selections are "100 MBps", "100 Mbps Full_Duplex" , "10 Mbps" and "10 Mbps Full_Duplex". 13. Click OK. 14. Click Close in the Network window. 15. Provide other necessary protocol information if asked by Windows NT. 16. Restart notebook. The NETGEAR FA411 PCMCIA Mobile Adapter and its associated driver is now properly installed into your system.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.