1. ibmtoken.exe Driver
2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (ibmtoken.exe)

[data]
type=network
version=3.11.300

[disks]
1=\DOS,"IBM PCI Token-Ring Option Diskette", disk 1
2=\WFW,"IBM PCI Token-Ring Option Diskette", disk 1

[netcard]
ibm$TRP="IBM PCI Token-Ring Adapter,NDIS2/3",0,ndis,tokenring,0x03,ibm$TRP_install,ibm$TRP_nif
ibm$TRPN2="IBM PCI Token-Ring Adapter,NDIS2 only",0,ndis_sngl,tokenring,real,ibm$TRP_install2,ibm$TRP_nif

[ibm$TRP_install]
ndis2=1:IBMTRP.DOS
ndis3=2:IBMTRP.386
netdir=1:IBMTRP.DOC,1:LA1.MSG

[ibm$TRP_install2]
devdir=1:IBMTRP.DOS,1:LA1.MSG,1:IBMTRP.DOC
device=IBMTRP.DOS, @devdir\IBMTRP.DOS, PROTMAN.DOS

[ibm$TRP_nif]
DRIVERNAME=IBMTRP$
param=NetAddress,"Network adapter address (enclose in double quotes)",chars,14,,0x32
param=EnableTxEofInt,"Enable transmit end of frame interrupt",text,"YES,NO",YES,0x30
param=MaxTransmits,"Maximum number of queued transmits",int,"2,512,1",4,0x30
param=MaxTxFrameSize,"Maximum transmit frame size",int,"14,18000,1",4216,0x30
param=MinRcvBuffs,"Minimum adapter driver receive buffers",int,"2,512,1",8,0x30
param=RcvBuffSize,"Size of adapter driver receive buffer",int,"64,18000,1",1220,0x30
param=LoopBack,"Loopback is performed by the adapter",text,"YES,NO",NO,0x32
param=FullDuplex,"Enable Full Duplex",text,"YES,NO",YES,0x30
param=TxPriMax,"Maximum high-priority transmit access priority",int,"0,5,1",5,0x30
param=TxPriThresh,"High-priority transmit threshold",int,"1,5,1",3,0x30
param=DataRate,"Configure PCI adapter network data rate",text,"M16,M4,AUTO",AUTO,0x30
param=BusNumber,"Bus number",int,"0,9,1",0,0x20
param=MediaType,"Media Type",static,2,,0x20
param=AdapterBusType,"PCI Bus type",static,5,,0x20
param=CardId,"PCI Card ID",static,269746238,,0x20
param=LLCOnly,"TokenRing Promiscuous Copy Mode",text,"YES,NO",NO,0x30