Setting.ini Driver File Contents (ENGLISH.zip)

;EPSON PRINT Image Framer Tool2.1
[STRING]
ERR_PQ=EPSON PhotoQuicker is starting. \nClose EPSON PhotoQuicker.
ERR_MOVE=A Frame file with the same name, or a related folder already exists in the destination folder. \nChange the Frame file name.
ERR_DISK_SIZE=The capacity of the destination disk is insufficient. \nCheck the disk capacity.
ERR_FILE_NAME=A file with the same name already exists. \nEnter a different file name.
ERR_FOLDER_NAME=A folder with the same name already exists. \nEnter a different file name.
ERR_FOLDER_MAKE=A folder with the same name already exists. \nEnter a different folder name.
ERR_COPY_FAILED=The operation failed. \nCheck the disk or CD-ROM. \nAlso check file access rights.
MSG_DELETE=The selected file will be deleted. \nOK?
MENU_FILE=File(&F)
MENU_FILE_CLOSE=Close(&X)
MENU_DISPLAY=View(&V)
MENU_DISPLAY_REFRESH=Refresh(&R)
MENU_HELP=Help(&H)
MENU_HELP_MANUAL=User's Guide(&M)
MENU_HELP_ABOUT=About EPSON PRINT Image Framer Tool 2.1(&A)...

BTN_MOVE=Move
BTN_ADD=Add
BTN_COPY=Copy
BTN_DELETE=Delete
BTN_NAME_CHANGE=Rename
BTN_FOLDER_MAKE=New Folder

BTN_FOLDER_SELECT=Select Folder...

TITLE_FOLDER_MAKE=EPSON PRINT Image Framer Tool2.1
EXPLAIN_FOLDER_MAKE=Enter the name of the folder to be created.
TITLE_CHANGE_NAME=EPSON PRINT Image Framer Tool2.1
EXPLAIN_CHANGE_NAME=Enter the new name.
TITLE_APP=EPSON PRINT Image Framer Tool2.1
TITLE_ABOUT=EPSON PRINT Image Framer Tool2.1
VERSION_ABOUT=EPSON PRINT Image Framer Tool  Version 2.14
COPYRIGHT_ABOUT=Copyright (C) SEIKO EPSON CORPORATION 2001-2003, All rights reserved.
BTN_OK=OK
BTN_CANCEL=Cancel
BTN_YES=Yes
BTN_NO=No
BTN_RETRY=Retry
BTN_OPEN=Open
BTN_EJECT=Eject
BTN_DESKTOP=Desktop
EXPLAIN_SELECT_FOLDER_TITLE=Select a folder.
ERR_NOT_FOLDER_NAME=The following characters cannot be used in the folder name.
ERR_NOT_FOLDER_NAME_DOT=The folder name is invalid.
ERR_FOLDR_NAME_CHAR=\/:*?"<>|
ERR_USM_NAME_LEN=Enter a six character file name.
ERR_NOT_FILE_NAME=Use the following characters in the file name. Alphanumeric characters and symbols _!#$%&'()@^`{}~.
ERR_FILE_NAME_CHAR=_!#$%&'()@^`{}~
LIST_UDL_TITLE=Title
LIST_UDL_FNAME=File Name
LIST_UDL_PAPER_SIZE=Paper Size
ERR_REMOVE_FILE=A file with the same name exists in the trash bin. \nEven if this file is restored from the trash bin, the correct information will not be restored. \nDelete?
COPY_NAME= Copy
ERR_NOT_USE_FOLDER=This operation cannot be performed using this folder.

MENU_CHANGE_TARGET=Change Destination(&T)
MENU_CHANGE_TARGET_PQ=EPSON PhotoQuicker(&P)
MENU_CHANGE_TARGET_MEMCARD=Printer Memory Card(&M)...
MENU_CHANGE_TARGET_DSC=Digital Camera(&D)...

MENU_SORT=Sort(&S)
MENU_SORT_CLASSIFICATION=Sort by File Type(&L)
MENU_SORT_TITLE=Sort by Title(&T)
MENU_SORT_PAPER_NAME=Sort by Paper Size(&P)
MENU_SORT_LAYOUT_TYPE=Sort by File Type(&L)

BTN_SELECT=Select...
BTN_NEXT=Next
BTN_GO=OK
BTN_RESCAN=Rescan

TITLE_UDLLIT1=Add source
TITLE_UDLLIT2=Add destination
TITLE_UDLLIT2_PQ=EPSON PhotoQuicker
TITLE_UDLLIT2_MEMCART=Printer memory card
TITLE_UDLLIT2_DSC=Digital Camera
TITLE_UDLLIT2_DRIVE=Drive:
USE_ADD_MEM_FUNC_FLAG=1

TITLE_MARGINE_NORMAL=Standard
TITLE_MARGINE_EXTEND=Maximum
TITLE_MARGINE_NO=No margins
TITLE_MARGINE_ROLLPAPER_CUTOFF=Auto Cutter OFF
TITLE_MARGINE_ROLLPAPER_CUTON=Auto Cutter ON
TITLE_MARGINE_ROLLPAPER_CUTONOFF=Auto Cutter ON/OFF

LIST_UDL_NAME=Name
LIST_UDL_PAPER=Paper

LAYOUT_CLASS_DSC=For digital cameras

TITLE_SELECT_MEMCARD1=EPSON PRINT Image Framer Tool2.1
EXPLAIN_SELECT_MEMCARD1=Insert the memory card \n\nInsert the memory card you want to add a Frame to, then click Next.\nWhen a memory card is inserted, other applications may start. \nIf this happens, close those applications.\n\nIf the memory card is already inserted, click Next.
TITLE_SELECT_MEMCARD2=EPSON PRINT Image Framer Tool2.1
EXPLAIN_SELECT_MEMCARD2=Select the memory card \n\nSelect the memory card you inserted, then click OK.
TITLE_MEMCARD=Memory Card:
TITLE_DRIVE=Drive

TITLE_OVERWRITE=EPSON PRINT Image Framer Tool2.1
EXPLAIN_OVERWRITE=A Frame file with this name already exists.\nDo you want to replace the existing file?
EXPLAIN_FILENAME=File Name: %s
EXPLAIN_TO_FILE=Existing File
EXPLAIN_FROM_FILE=New File

ERR_SELETED_DRIVE=The destination chosen during the previous session may have changed.\nSelect the destination you would like to use.
ERR_UDLLIT2_OVER_MAX_NUM=The maximum you can add is 100.
ERR_UDLLIT2_OVER_MAX_NUM2=The maximum you can add is 100.
ERR_CONFIRM_REPLACE=A Frame file with the same name, or a related folder already exists in the destination folder.\nDo you want to replace it?\n\nTitle:%s\nFile Name:%s
ERR_SELECT_SAME_FOLDER=You cannot operate with this combination.\nChange the folder or destination.
ERR_SELECT_SAME_TARGET=You cannot operate with this combination \nChange the folder or destination.

ERR_SHORT_USM_FILE_NAME=Enter a six character file name.
ERR_LAST_SELECT_TARGET=The destination chosen during the previous session may have changed.\nSelect the destination you would like to use.
ERR_NOT_SUPPORTED_FORMAT=EPSON PRINT Image Framer Tool2.1 does not support this file format.\nPlease use the latest version of EPSON PRINT Image Framer Tool.
ERR_UNKNOWN_FILE_IN_RELATION_FOLDER=A file unrelated to EPSON PRINT Image Framer Tool exists in the pertinent folder.\nOperation canceled.
ERR_INVALID_PIF_FILE=There is an error in the Frame file data.\nOperation canceled.

ERR_RELATION_UST_FILE=Operation canceled because there is a photo connected with the Frame.
ERR_CANNOT_MOVE_DSC_PIF_FILE=The Move option cannot be used in this case.\nUse the Copy option instead.
ERR_CANNOT_REGIST_TO_DSC=This file cannot be registered to a digital camera.
ERR_RESERVED_USD_FILENAME=The suffix, _%c, is reserved. Use another file name.
ERR_RESERVED_USM_FILENAME=The file name EPSN00 is reserved. Use another file name.
ERR_INVALID_UDL_FOLDER=Select a destination from the Change Destination menu.
TITLE_UDLLIT2_NONE=Not specified
ERR_DISK_FULL=There is not enough free disk space to perform the operation. Operation canceled. 
ERR_MANUAL_NOT_FOUND=Cannot find the manual. \nPlease install it again.
ERR_PQ_REGIST_FOLDER_NOT_FOUND=Because a folder for registering Frames does not exist in EPSON PhotoQuicker, Frames cannot be registered. \nA folder for registering Frames is created when EPSON PRINT Image Framer Tool or PIF DESIGNER is installed. \nReinstall EPSON PRINT Image Framer Tool or PIF DESIGNER.

TITLE_CONFIRM_CHANGE_NAME=EPSON PRINT Image Framer Tool2.1
EXPLAIN_CONFIRM_CHANGE_NAME=If you change the name of the Frame, the access rights of the Frame will belong to you. Do you want to change the name?
CHECK_SHOW_MESSAGE=Do not show this message again.

A6=A6
A4=A4
A3=A3
A3N=A3+
3.5x5=89x127mm
4x6=4x6in
100x150=100x150mm
4x6NP=10x15/4x6
R100=100mm Roll Paper
R5IN=127mm Roll Paper
RA4=A4 Roll Paper
RA3N=A3+ Roll Paper
NotSupported=Not available for this paper size

DSC_100x150=100x150mm
DSC_4x6NP=10x15/4x6
DSC_NotSupported=Not available for this paper size

TITLE_UDLLIT_TO=Destination
PAPER_UNDEF_STR=Undefined paper size
TITLE_UDLLIT_TO=Add destination
LIST_TYPE_DSC_USM=For digital cameras

ICON_A6=Icons\\A6.ico
ICON_A4=Icons\\A4.ico
ICON_A3=Icons\\A3.ico
ICON_A3N=Icons\\A3P.ico
ICON_3.5x5=Icons\\89x127.ico
ICON_4x6=Icons\\4x6.ico
ICON_100x150=Icons\\100x150.ico
ICON_4x6NP=Icons\\4x6NP.ico
ICON_R100=Icons\\R100.ico
ICON_RA4=Icons\\RA4.ico
ICON_RA3N=Icons\\RA3P.ico
ICON_R5IN=Icons\\R127.ico
ICON_NotSupported=Icons\\NoSprtEN.ico

PAPER_ICON_ORDER1=WALLET
PAPER_ICON_ORDER2=BUSINESSCARD1
PAPER_ICON_ORDER3=3.5x5
PAPER_ICON_ORDER4=HAGAKI
PAPER_ICON_ORDER5=100x150
PAPER_ICON_ORDER6=4x6NP
PAPER_ICON_ORDER7=A6
PAPER_ICON_ORDER8=4x6
PAPER_ICON_ORDER9=5x7
PAPER_ICON_ORDER10=5x8
PAPER_ICON_ORDER11=8x10
PAPER_ICON_ORDER12=A4
PAPER_ICON_ORDER13=Panoramic
PAPER_ICON_ORDER14=Letter
PAPER_ICON_ORDER15=11x14
PAPER_ICON_ORDER16=11x17
PAPER_ICON_ORDER17=A3
PAPER_ICON_ORDER18=A3N
PAPER_ICON_ORDER19=R89
PAPER_ICON_ORDER20=R100
PAPER_ICON_ORDER21=R5IN
PAPER_ICON_ORDER22=RA4
PAPER_ICON_ORDER23=RA3N
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.76