1. Attansic_V033790106.zip Driver
2. release note.txt File Contents

release note.txt Driver File Contents (Attansic_V033790106.zip)

v0.3.3790.106(A0025)
setup.exe
(1)fixed install from CD-ROM issue.

v0.3.3790.105(A0025)
.sys
(1)improve WINTHRAX issue.

v0.3.3790.104(A0025)
.sys
(2)fixed some driver issue.

v0.3.3790.103(A0025)
.sys
(2)fixed led issue.

v0.3.3790.102(A0025)
Utility
(1)Mimo-v1.0.60.7

v0.3.3790.101(A0025)
.sys
(2)fixed link down error.

v0.3.3790.100(A0025)
setup.exe
(1)L1Setup_rev0.1.11.100

v0.3.3790.0(A0025)
.sys
(1)change PCIE register 0x12fc from 0x588 to 0x6600.

setup.exe
(1)L1Setup_rev0.1.11.5

Utility
(1)Mimo-v1.0.60.5

v0.2.3790.6(A0025)
.sys
(1)fixed mac address issue.
(2)change 100/10 form auto mode to force mode.
(3)improve a little Rx performance issue.


v0.2.3790.5(A0024)
.sys
(1)However user have to set mac address or not,driver will to restart auto load.

v0.2.3790.4(A0023)
.sys
(1)change PCIE register 0x1008 bit 15 from 0 to 1.
(2)change PCIE register 0x1200 bit 14/15 from 1 to 11.
(2)set PCIE register 0x12fc to 0x588.

v0.2.3790.3(A0023)
.sys
(1)change PCIE register 1008 bit 15 from 0 to 1.
(2)change PCIE register 1200 bit 14/15 from 11 to 1.

v0.2.3790.2(A0023)
.sys
(1)change phy register 4 from 0xC40 to 0xc60. (Media Type is 10M Full Duplex)

v0.2.3790.1(A0023)
.sys
(1)change 100/10 form force mode to auto mode.

v0.2.3790.0(A0023)
.sys
(1)the same v0.1.3790.2

setup.exe
(1)L1Setup_rev0.1.11.3

Utility
(1)Mimo-v1.0.60.1


v0.1.3790.2(A0023)
.sys
(1)fixed via s3 issue.(reg 4 bit 10 -->0)


v0.1.3790.1(A0022)
.sys
(1)flashtest (used for application)
(2)eepromtest(used for application)
(3)netbench issue( L1 do not support packet size that more than 16k in 1 buffer ,when packet size > 16k ,driver should splite it ).

v0.1.3790.0(A0021)
(1)Reset Driver version from v1.00.19 to v0.1.3790.0.
.sys
(1)Disable PCIE register setting.(None setting Reg 0x1004)
(2)Change NIC_HARDWARE_ERROR_THRESHOLD value from 5 to 100.
(3)Modify error-handing for "INT_DMAERR & INT_PCIE".   

v1.00.19
.sys
(1)Reset PCIE register.(change Reg 0x1004 bit16~17 from 1 to 0)

v1.00.18
.inf
(1) Fix the PVCS item 250 - H/W issue; According to spec update to remove 1GMbps forced mode from INF(device properity)
(2) Remove VLan tag.
(3) Add "Shutdown wake up" tag from INF(device properity)
setup.exe
(1) Fix the PVCS item 245 - Uninstall driver fail on Windows XP-64bits by Windows add/remove program
(2) Fix the PVCS item 246 - Uninstall driver fail on Windows 2003-64bits by Windows add/remove program


v1.00.17
.sys
(1) Add a error-handing for ACPI.
(2) Don't read/write device register after ACPI start (xxx set to 1) to prevent bother device's state machine
(3) Fix the PVCS item 182 - [Windows] Driver installation fail on Windows 98SE
(4) Fix the PVCS item 183 - [Windows] Driver installation fail on Windows ME

v1.00.16
.sys
(1) Fixed WHQL issues
(2) Fixed CDT Test
(3) Fixed Flash test and EEprom in utility.
.utility
(1) Fix bug associated with SCR 214
(2) Gray the buttons when the user click the buttons
(3) Single instance. Utility reentry issue
(4) Fix bug associated with SCR 222.

[History]
v1.00.15
.sys
(1) Support new L1 chip(version C018).

v1.00.14
.sys
(1) Fix the PVCS item 194 - WHQL test item "Driver verifier-NDIS" failed
(2) Fix the PVCS item 196 - WHQL test item "Large Memory /PAE-phase 1" failed
(3) Fix the PVCS item 197 - WHQL test item "Large Memory /PAE-phase 2" failed  
(4) Fix the PVCS item 198 - WHQL test item "NDIS(Low speed)" failed  
(5) Fix the PVCS item 202 - WHQL test item "ACPI Stress High Mem (> 4GB) Test" failed  
(6) Fix the PVCS item 203 - WHQL test item "ACPI Stress Low Mem (< 4GB) Test" failed
(7) Fix the PVCS item 205 - WinXP 64bit is crashed during driver installation of the 2nd NIC
(8) Fix the PVCS item 206 - Win2003 64bit is crashed during driver installation of the 2nd NIC.

v1.00.13
.sys
(1) Fix the PVCS item 116 (WinXP when hibernate link down)
(2) Fix the PVCS item 123 and 124 (Win98 don't work)
(3) Fix the PVCS item 133 and 134 (Now Win 98,2k,xp support Hibernate and suspend (S1)), reconnection is ok.
.exe
(1) Fix the PVCS item 172 (Uninstall program will remove all L1 inf files in %windir%\inf directory).
.utility
(1) Fix GEN_GENERAL_INFO OID length on 64bit OS.

v1.00.12
.sys
(1) Add Vlan support for C010C chip
(2) Correct flash detect
(3) Correct PHY-CDT test.
.exe
(1) Support XP X64 driver install.
.utility
(1) Add driver reload support for 64bit OS.

v1.00.11
.sys
(1) Enhanced performance.
.exe
(1) Support XP X64 driver install.

v1.00.10
.sys
(1) Fix VLan tag issue.
.inf 
(1) Fix SCR 175(invalidate date in INF file).
.exe
(1) Support 64-bit driver install.

v1.00.09
.inf
(1) Support winXP 64-bit install.

v1.00.08
.sys
(1) WHQL now can pass,set the maxoffloadsize to 32k.

v1.00.07
.sys
(1) Fix WOL dont support S5.

v1.00.06
.sys
(1) Driver fix the WOL problem.
.inf
(1) Support 2003 64-bit install.

v1.00.05
.sys
(1) Driver fix the Jumbo test under Win2K.


v1.00.04
.sys
(1) Driver can get "mac address" from flash/eeprom
(2) Driver set the link speed to 10/100 when it enter Sleep mode
(3) Driver Add "checkforhang" function.
.exe
(1)	Support driver uninstall function.