Pentium M54Li Motherboard
These instructions are for 08 or older prefix Pentium BIOS upgrades
up to 12 bios version.
FLASHPS.BAT will upgrade systems that have a Future Domain card only.
FLASHPM.BAT will upgrade systems that DO NOT HAVE a Future Domain card.
1 Make a copy of the settings in the CMOS (They may be lost during the
upgrade)
2 The flash BIOS file should be expanded to a clean non-system floppy
or a directory on the HD. (ie. pkunzip M54LI12.ZIP A:).
3 Power up system and boot clean off the hard drive (Press F5 when you
see "Starting MS-DOS").
4 Insert the disk that the expanded files are on.
5 Change to the disk or directory where the expanded files are.
6 Type in "PHLASH.EXE M54LI_12.PS2" or "FLASHPS.BAT" to run the flash
program, for systems that have a Future Domain card.
Type in "PHLASH.EXE M54LI_12.PM" or "FLASHPM.BAT" to run the flash
program, for systems that do not have the Future Domain card.
7 When the program asks "Do you want to use Auto sensing?", answer "Y".
8 The program will then go through two steps: a) erase current BIOS
b) write new BIOS The system will re-boot.
9 The message "Press <F1> to resume, <F2> to setup" and/or "checksum error"
will come up at this time. You will need to go into the CMOS and
check/change the values to the correct values. After checking
everything, exit CMOS, save the values and reboot the system.
10 Once the system has rebooted, go to the DOS prompt and power down the
computer. The BIOS is now updated.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.