french.ini Driver File Contents (ProbeII_V10405.zip)

ÿþ[translations]

CONFIG = CONFIGURATION

Open report window = Ouvrir le menu d'enregistrement

Open config window = Ouvrir le menu de CONFIGURATION

Hide = Cacher

Exit = Quitter

Restore = Restaurer

Increase threshold = Augmenter la limite

Decrease threshold = Diminuer la limite

Enable / Disable magnetic = Activer/Désactiver les effets magnétiques

Close = Fermer

PC Probe II Message = Message PC Probe II

There are some warnings = Message d'avertissement

AMD CnQ is enabled. You can disable VCore monitoring in CONFIG = AMD CnQ est activé. Vous pouvez désactiver la surveillance Vcore dans le menu CONFIGURATION 

degrees centigrade = Celsius

Degree F = Fahrenheit

Top = En haut

Right = A droite

Bottom = En Bas

Left = A Gauche

OK = OK

Cancel = Annuler

Preference = Préférences

Always on Top = Toujours visible

Enable Monitoring Panel = Activer la fenêtre de surveillance

Scheme = Apparence

User = Utilisateur

Small = Petite fenêtre

Enable Sound Effect = Activer les effets sonores

Run in Boot-up Session = Lancer au démarrage de Windows

Open scheme window = ouvrir la fenêtre des apparences

DMI information = Informations DMI

PCI information = Informations PCI

WMI information = Informations WMI

Usage = Utilisation

Open / Close Preference panel = Ouvrir/Fermer le menu des préférences

Sensor / Threshold = Capteur/Limite

Preference = Préférences

Temperature = Température

Voltage = Voltage

Fan Speed = Vitesse du ventilateur

Enabled = Activer

Sensor Name = Nom du capteur

Nominal Value = Valeur nominale

Current Value = Valeur actuelle

Threshold = Limite

Default = Par défaut

Apply = Appliquer

Cancel = Annuler

Save as = Sauvegarder sous..

Load = Charger

Alert = Alerte

Message Box = Boîte de Message

Audio Alert = Alerte audio

Volume = Volume

Temperature Scale = Échelle des températures

Celsius = Celsius

Fahrenheit = Fahrenheit

QFan = Qfan

Enable QFan = Activer Qfan

Target Temperature = Limites de température

Increase Target Temperature = Augmenter la température de la cible

Decrease Target Temperature = Diminuer la température de la cible

Polling Interval = Intervalle de scrutation

Seconds = Secondes

CPU QFan = QFan du CPU 

Chassis QFan = Châssis du Qfan

Disabled = désactiver

Alert log = Journal des alertes

System information = Informations système

Alert log report = Rapport du journal des alertes

Number = Nombre

Abnormal = Anormal

become normal = Normal

system information report = Rapport d'informations système

date = date

time = Temps

Clear = Effacer

Save as = Sauvegarder sous..

Usage = Utilisation

Hard Disk = Disque dur

Memory = Mémoire

CPU = CPU

Used = Utilisé

Available = Disponible

Total = Total

Bytes = Bytes

MB = Carte mère

Physical Memory Usage = Utilisation de la mémoire physique

CPU Usage = Utilisation du CPU

CPU Usage History = Historique d'utilisation du CPU

Set to default values? = Souhaitez-vous rétablir les paramètres par défaut??

Do you want to apply current setting? = Souhaitez-vous appliquer les paramètres établis?

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.75