readme.txt Driver File Contents (ATISB600_RAIDAHCI.zip)

Usage for sbsetup(including 3 files: engine.bin, dl.bin and sbsetup.exe, please copy the package files to one folder). 
 
 sbsetup -c                 : clear SB600 configuration.
 sbsetup -b -f <filename>   : backup current SB600 configuration to filename.
 sbsetup -r -f <filename>   : restore SB600 configuration according filename.
 sbsetup -k                 : setup SB600 by entering key.

 sbsetup                    : If no parameters, enter into User Interface and mainly support Rebuild Array, 
			      Initialize Array, Synchronize Array, Backup configuration, Resore configuration, 
		  	      Set Hd capacity. Following is the details of the each item.

1.View Drive Assignment
    This item is to view the status of the disks and if the disk is assigned to an array. You can press 'ALT+F1' to del
  the array infomation stored in the disk.
2.Define Array
    This item is to define the array, you can press 'CTRL+Y' twice to set the array capacity.
3.Delete Array
    This item is to delete the array you have defined.
4.Controller Configuration
    This item will show you the information of the device,include addresses, IRQ number and memory size.
5.Rebuild Array
    This item is to rebuild the array whose status is critical and make it can word normally.
6.Synchronize Array
    This item is to set the data in the disk of the array synchronized.Usually,if some data of the array was wrong ,we use it. 
7.Initialize Array
    This item is to write zero to the disks of the array.
E.Save Configurations
    This item is to save the informaiton of the array defined.
F.Restore Configurations
    This item is to restore the definition for the array according to the file you saved.
G.Set HDD Capacity 
    This item is to set the capacity for the disk, if you want to set the default value for it ,press the 'ALT+F1',Rebooting the
  system is necessary if you want to set the capacity after having set it once.     
  
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.96