1. Hp9898se2000FullRiptideModemVideoMouseMonitorNetworkKeyboardDrivers.zip Driver
2. N40118EN.TXT File Contents

N40118EN.TXT Driver File Contents (Hp9898se2000FullRiptideModemVideoMouseMonitorNetworkKeyboardDrivers.zip)

1.0     Introduction
2.0     Installation Notes
3.0     Windows NT OpenGL Driver Information.
4.0     ATI Contact Information 

n40118en.exe                             May 1998

**************************************************
1.0     Introduction

This is release 5.1.118 of the ATI 
Windows NT 4.0 driver with OpenGL
support for 3D RAGE PRO.

*************************************************
NOTE: 
The display driver included in this package may 
be used with ATI products based on the RAGE PRO 
chipset, in either PCI or AGP configurations. 
That includes the XPERT@WORK, XPERT@PLAY, XPERTXL 
and ALL-IN-WONDER PRO.

The display driver bundled in the n40118en 
package is the same version as found on ATI 
INSTALLATION CD-ROM marked "ATI Software Release 
5.11".

This display driver bundle supports the following
languages;
- English

This file is a self-extracting file which will 
install the Windows NT OpenGL display driver 
installation files into C:\ATI\SUPPORT\n40118en\ 
on your hard drive.  The files may be copied to a 
floppy disk if necessary for installation purposes.

***************************************************

2.0     Installation Notes

USING n40118en.exe

1   You must download n40118en.exe and save it to a 
directory on your systems hard disk. For example 
C:\temp is a common directory used to initially 
save a file into. 

2   Once you have downloaded n40118en, close all 
programs, click the Start button and select the RUN 
menu item. Click the Browse button. Browse to the 
directory where n40118en.exe was saved. Select 
n40118en and click OK to run the program.

3   Follow the instructions on the screen.

!   The ATI DISPLAY DRIVER files will be unpacked 
to your hard disk.

NOTE: 
It is possible to direct the files to a USER 
SELECTED destination on FLOPPY DISK or to a HARD
DISK other than C:.



DISPLAY DRIVER installation instructions after 
running n40118en.

1.  Run the Windows NT Display program located 
in the Control Panel, under "Settings" in the 
Start menu. Alternatively, position the cursor 
on the background of the desktop, click the right 
mouse button, then select "Properties" from the 
popup menu.

2.  Select the "Settings" page.

3.  Select "Display Type...".

4.  Select "Change..." from the display options.

5.  Select "Have Disk..."

6.  NT will prompt you for the correct path, 
enter C:\ATI\SUPPORT\n40118en. Confirm that 
ATI.INF is selected and click "OK" twice.

7.  A list of ATI graphics accelerators will be
displayed. Select the card you are using, then 
click on the "OK" button.

8.  Windows NT will once again prompt for 
confirmation. All appropriate files are then 
copied to your Windows directory.

9.  Restart Windows NT.  Windows NT will start 
up using the new drivers.

10. NT will boot into a default mode and start 
the Display applet allowing for mode selection.

After successfully installing the driver, you 
can delete the contents of the directory 
C:\ATI\SUPPORT\n40118en using the 'Remove ATI 
Temporary Files' icon.

We recommend that you keep a copy of the 
n40118en.EXE, in case you need to install 
the driver again.

************************************************

3.0      Windows NT OpenGL Driver Information.

>>>   Current details can be found   <<<
>>>      on the ATI WEB site:        <<<

http://www.atitech.ca/3dalley/opengl.html   


************************************************

4.0     ATI Contact Information

Technical Support Head Office 
Serving the U.S.A. and Canada.
Support available in English only

Internet Email:           
support@atitech.ca

Driver Download Sites:
support.atitech.ca
ftp.atitech.ca

Telephone numbers:
905) 882-2626 VOICE
(905) 882-0546 FAX

Technical Support in Europe
Serving the E.U. countries, Central 
and Eastern Europe and the rest of the world.
Support available in English, German, French, 
Italian, and Spanish

Internet Email:	
eurotech@atitech.ca

Driver Download Sites:
support.atitech.ca
ftp.atitech.ca

Telephone numbers:
+353 1 807 7826 VOICE
+353 1 807 7846 FAX
************************************************

For more information please see the file 
README.DEF

************************************************