<================================================================>
< Hewlett-Packard >
< EN1207D-TX PCI 10/100 Fast Ethernet Adapter >
< Netware Client32 Driver Installation >
< >
< Copyright (C) 1998 HEWLETT PACKARD >
< All Rights Reserved. >
<================================================================>
Contents:
A. File Description
B. Driver Installation for DOS32
C. Driver Installation for Microsoft Windows 3.x
D. Driver Installation for Microsoft Windows 95
E. Driver Installation for Novell NetWare V4.11 Server
A. File Description
--------------------
----------------------------------------------------------------------------
Filename Description
----------------------------------------------------------------------------
README.TXT This file. Presents a summary of the contents for
Netware Client32 driver installation.
1207ODI.LAN Client32 ODI driver for HP NETWORK CARD - EN1207D-TX Adapter
This driver complies with Netware ODI Server driver SPEC 3.31
1207ODI.LDI The driver (1207ODI.LAN) installation information file for
Netware Server 4.11, DOS32, Microsoft Windows 3.x.
1207ODI.INF The driver (1207ODI.LAN) installation information file for
Microsoft Windows 95.
----------------------------------------------------------------------------
B. Driver Installation for DOS32
1. If you have finished installing the Netware Client 32 for DOS,
all you have to do is to modify STARTNET.BAT. Please see the
sample STARTNET.BAT below.
If not, please follow the step 2 - step 7 below.
Sample STARTNET.BAT is as follow:
SET NWLANGUAGE=English
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\1207ODI.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\1207ODI.LAN FRAME=Ethernet_802.3
LOAD C:\NOVELL\CLIENT32\1207ODI.LAN FRAME=Ethernet_II
LOAD C:\NOVELL\CLIENT32\1207ODI.LAN FRAME=Ethernet_SNAP
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
C:
2. Run INSTALL.EXE from Netware DOS 32 diskette 1 (or from Netware
4.11 CD). When the product menu appears, mark the
"Netware Client 32 for DOS" item, then press <Enter>.
3. Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu,
then press <Enter>.
4. Select "USER SPECIFIED 32 BIT DRIVER." press <Enter>.
5. Insert HP Driver Diskette
into your floppy diskette drive, then specify
the driver path, such as A: or B:.
6. Follow instructions to complete Client32 for DOS software
installation.
7. Reboot your machine.
C. Driver Installation for Microsoft Windows 3.x
Please refer to Content B., in step 2, mark "Netware Client 32 for DOS"
and "Client 32 for Windows"; in step 5, specify the driver path as
A:\LANDRV32 or B:\LANDRV32. then follow step 3..7
to complete the installation.
D. Driver Installation for Microsoft Windows 95
If you have installed the Microsoft Client in your Windows 95 system,
you should remove the adapter object and NDIS 2(3) driver for the
adapter from the Windows 95 system. If you have previously installed
an HP Network Card NDIS 2(3) driver,
you should take the following steps before installing
the HP Network Card Client32 driver.
D.1 Remove the previously installed adapter object & driver for the
HP Network Card, if any.
==============================================================
1. Click the "My Computer" icon in the Main Program Group.
2. Click the "Control Panel" icon in My Computer window.
3. Click the "System" icon in the Control Panel window.
4. Click the "Network adapter" icon in System window.
5. Click the "HP EN120D-TX Fast Ethernet PCI Adapter"
icon in System window.
6. Click <Remove> button, then click <OK> button.
7. Close the opened windows.
D.2 Client 32 Driver Installation in Windows 95
===============================================
8. Plug the HP Network Card into one
of the PCI slots of your PC machine.
9. Turn the power on to boot up Windows 95.
10. Windows 95 will then prompt with "HP EN1207D-TX PCI Fast
Ethernet Adapter" in New Hardware Found dialog box.
11. Follow instructions to complete the installation.
Note: Windows 95 will ask you to key in the proper path of
the following diskette:
a. Netware Client 32 for Windows 95 Disk,
b. PCI-Bus Ethernet Adapter Driver Diskette
--> Insert Driver Diskette,
then, assign the path to A:\LANDRV32 or B:\LANDRV32
c. Windows 95 CD-ROM
E. Driver Installation for Novell NetWare V4.11 Server
Requirements
------------
Make sure you have the following:
1. Driver Diskette
Installation Procedure
----------------------
1. Insert the Driver Diskette that comes with the package
into drive A: and check the contents of the
subdirectory \LANDRV32. It should have
the following files:
1207ODI.LAN ----> your Novell NetWare v4.x Server Driver
1207ODI.LDI ----> your Novell NetWare v4.x Server Driver
configuration files
2. At the NetWare prompt (indicated by the Server name), run
the INSTALL.NLM program by typing:
server name: LOAD INSTALL <Enter>
3. Follow screen instruction to complete the process. Respond
to prompts displayed on the screen. Select the following
items in the order given below. Press <Enter> to confirm
each choice:
Maintenance/Selective Install <Enter>
LAN Driver Options (Configure/Load/...) <Enter>
4. Press the <Ins> key to insert other drivers you wish
to install.
5. Press <F3> to display the driver loading path as follows:
A:\LANDRV32 <Enter>
6. The 1207ODI.LAN will appear as an item under the
"Select a LAN Driver" menu. Choose the correct board number
and Select it to load the driver and start the binding
process. This will allow you to load and bind all 4 frame
types supported by NetWare.
7. Next time you reboot your NetWare 4.11 server, do so by
following steps 2 to 4 above.
-- End of File --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.