-------------------- The RTL8139 Boot ROM ---------------------- OutLines: How to install the Novell 4.1x & 5.0 RPL Server 1. You must create a remote boot diskette. Copy the following files into this boot diskette: COMMAND COM IO SYS attrib -s -h io.sys MSDOS SYS attrib -s -h msdos.sys LSL COM RTSODI COM IPXODI COM NETX EXE NET CFG AUTOEXEC BAT CONFIG SYS The AUTOEXEC.BAT file contains these lines : PATH H:\LOGIN; SET COMSPEC=H:\LOGIN\COMMAND.COM DOSKEY LSL RTSODI IPXODI NETX The CONFIG.SYS file contains these lines : DEVICE=A:\HIMEM.SYS STACKS=9,256 DOS=HIGH FILES=30 BUFFERS=30 FCBS=16,8 2. Boot a workstation with at least one floppy disk drive, and log in to the server as SUPERVISOR OR ADMIN. 3. Change directory to SYS:SYSTEM 4. With the DOS boot diskette in driver A: execute the DOSGEN utility. This creates a DOS boot image file named NET$DOS.SYS. 5. Copy NET$DOS.SYS to the SYS:LOGIN directory. 6. Remoteboot different DOS image files by RPL server Create BOOTCONF.SYS in SYS:\LOGIN directory BOOTCONF.SYS format is 0 x 525439* = RTL8139.SYS 0 x 52544C* = NE2000.SYS 0 x 52544C29* = RTL8029.SYS 0 x 52544C81* = RTL8129.SYS (Node number) RTL8029.SYS,NE2000.SYS,RTL8129.SYS renamed by NET$DOS.SYS file. Note: if have not BOOTCONF.SYS file or node number is not match in BOOTCONF.SYS Node number , there will be boot default NET$DOS.SYS 7. Copy RBOOT.RPL, ETHER.RPL to the SYS:LOGIN directory. 8. Copy RPL.NLM to the SYS:SYSTEM directory. Note: It depends on file server's version. In the RPL developer's kit, 9. Edit the AUTOEXEC.NCF file in the SYS:SYSTEM directory. For example: file server name FTEST ipx internal net 831123 load NE2000 port=300 int=3 name=8022 frame=ETHERNET_802.2 load NE2000 port=300 int=3 name=8023 frame=ETHERNET_802.3 bind ipx to 8022 net=21 bind ipx to 8023 net=23 ; ---------- for RPL file server ----------------- load rpl bind rpl to 8022 ; ---------- for RPL file server ----------------- mount all load monitor 10. Shutdown the file server, and reboot it. 11. Configure the RTL8139 PCI Card to "Boot ROM Enable". 11. Now, when the file server is running, the workstation equipped with Boot ROM on the RTL8139 card will be attached to the file server without any hard disk or floppy.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.