\HELP\NETWARE\NW41X.TXT Fast Ethernet PCI Adapter ---------------------------------------------- Driver Installation for Novell NetWare Server version 4.1X ---------------------------------------------------------- Running Auto Install from Novell NetWare ---------------------------------------- The following instructions use the PCI adapter as an example. 1. Boot up the Novell Server. 2. After booting up, execute "LOAD INSTALL". Type: : load install 3. Select "Driver Option" and then press Enter. 4. Select "Configure network drivers" and then press Enter. 5. Select "Load a driver" and then press Enter. 6. Press the <Ins> key to install an unlisted driver. 7. Press <F3> to specify a different path, provide the path where the USR79.LAN driver resides and hit Enter. eg. D:\NWSERVER\SERVER\NW41X 8. Select "USR79.LAN" to start the installation procedure. 9. Select "Yes" when asked if you want to copy driver USR79.LAN. 10. Select "No" when asked if you want to save existing ETHERTSM.NLM. 11. Select "No" when asked if you want to save existing NBI.NLM. 12. Select "No" when asked if you want to save existing MSM.NLM. 13. Choose the "Select/Modify driver parameters and protocols" selection and move the cursor to the USR79_1 parameters window to change the the slot number. A slot number must be entered before the installation can proceed. You can make the slot number 1. Even though the slot number may not be correct, the USR79.LAN driver automatically find the USR79 card and load the proper slot number. You do not have to enter any value for media and line speed or the Node address. The driver can use the default value for these parameters. 14. Choose "Save parameters and load driver" to start the driver loading process. 15. Hit <Enter> when a Network number is provided to bind IPX to the USR79_1 adapter card (frame Ethernet_802.2). 16. Hit <Enter> when a Network number is provided to bind IPX to the USR79_1 adapter card (frame Ethernet_SNAP). 17. Hit Enter when a Network number is provided to bind IPX to the USR79_1 adapter card (frame Ethernet_II). 18. Hit Enter when a Network number is provided to bind IPX to the USR79_1 adapter card (frame Ethernet_802.3). All four supported Ethernet frames types are loaded. 19. Select No when asked if you want to select an additional Network driver. 20. Select "Return to the previous menu" in the Additional Driver Actions window. 21. Hit <Esc> a number of times to exit to the Install main menu. Select "Yes" when asked if you want to exit INSTALL. 22. When existing to the main, the driver is already loaded for the adapter card. Manually modifying Software on an existing NetWare 4.1X Server -------------------------------------------------------------- The following instructions use the PCI adapter as an example. 1. Copy the USR79.LAN file into the subdirectory of your server. For example: > COPY D:\NETWARE\SERVER\NW41X\USR79.LAN C:\NWSERVER 2. Copy the following NLM files into your server directory. > COPY D:\NETWARE\SERVER\NW41X\NBI.NLM C:\NWSERVER > COPY D:\NETWARE\SERVER\NW41X\MSM.NLM C:\NWSERVER > COPY D:\NETWARE\SERVER\NW41X\ETHERTSM.NLM C:\NWSERVER 3. Run SERVER.EXE on the server. 4. At the NetWare prompt, enter "Load Install" to edit the AUTOEXEC.NCF file. : load install Select <System Option> Select <Edit Autoexec.NCF file> 5. Add the following lines to the AUTOEXEC.NCF file: load C:\NWSERVER\NBI.NLM load C:\NWSERVER\MSM.NLM load C:\NWSERVER\ETHERTSM.NLM load C:\NWSERVER\USR79.LAN frame=Ethernet_yyyy name=USR79_1_zzz ;zzz is a unique 3-digit number ; for every frame type loaded. ;yyyy is the Ethernet frame type. bind ipx USR79_1_zzz net=xxxx ;xxxx is the network number (eg. 33) 6. Press the <Esc> key when done editing. Select "Yes" to save. 7. Select "Exit" to exit NetWare Configuration. 8. Reboot the server system. The driver is now installed. Parameters supported by the USR79.LAN driver --------------------------------------------------------- Media Mode : the default is AUTO. 1. "LOAD INSTALL" to <Enter> 2. Select "NCF files Options" to <Enter> 3. Select "Edit AUTOEXEC.NCF file" to <Enter> 4. The context as follow: *************************************************************** LOAD USR79 SLOT=2 FRAME=ethernet_802.2 NAME=USR79_1_E82 BIND IPX USR79_1_E82 NET=5CAE1257 LOAD USR79 SLOT=2 FRAME=ethernet_802.3 NAME=USR79_1_E83 BIND IPX USR79_1_E83 NET=48240912 LOAD USR79 SLOT=2 FRAME=ethernet_snap NAME=USR79_1_ESP BIND IPX USR79_1_ESP NET=168B9E3C LOAD USR79 SLOT=2 FRAME=ethernet_II NAME=USR79_1_EII BIND IPX USR79_1_EII NET=D380E0C0 *************************************************************** 5. Please change the context and key as follow : LOAD USR79 SLOT=2 MEDIUMTYPE=xxxxx FRAME=ethernet_802.2 NAME=USR79_1_E82 BIND IPX USR79_1_E82 NET=5CAE1257 LOAD USR79 SLOT=2 MEDIUMTYPE=xxxxx FRAME=ethernet_802.3 NAME=USR79_1_E83 BIND IPX USR79_1_E83 NET=48240912 LOAD USR79 SLOT=2 MEDIUMTYPE=xxxxx FRAME=ethernet_snap NAME=USR79_1_ESP BIND IPX USR79_1_ESP NET=168B9E3C LOAD USR79 SLOT=2 MEDIUMTYPE=xxxxx FRAME=ethernet_II NAME=USR79_1_EII BIND IPX USR79_1_EII NET=D380E0C0 MEDIUMTYPE=xxxxx: 10HALF 10FULL 100HALF 100FULL 5. Press the <Esc> key when done editing. Select "Yes" to save 6. Press the <Esc> key exit NWCONFIG , select "Yes" 7. "down" to <Enter> exit NetWare 8. "server" <Enter> into NetWare again . Sample AUTOEXEC.NCF file ------------------------ #Load the NLM files on Netware 4.1X server #----------------------------------------- load c:\nwserver\nbi load c:\nwserver\msm load c:\nwserver\ethertsm #Working with USR79 driver (one PCI card) #---------------------------------------- LOAD USR79 SLOT=2 FRAME=ethernet_802.2 NAME=USR79_1_E82 BIND IPX USR79_1_E82 NET=5CAE1257 LOAD USR79 SLOT=2 FRAME=ethernet_802.3 NAME=USR79_1_E83 BIND IPX USR79_1_E83 NET=48240912 LOAD USR79 SLOT=2 FRAME=ethernet_snap NAME=USR79_1_ESP BIND IPX USR79_1_ESP NET=168B9E3C LOAD USR79 SLOT=2 FRAME=ethernet_II NAME=USR79_1_EII BIND IPX USR79_1_EII NET=D380E0C0 #Working with USR79 driver (multiple PCI cards) #---------------------------------------------- LOAD USR79 SLOT=1 FRAME=ethernet_802.2 NAME=USR79_2_E82 BIND IPX USR79_2_E82 NET=5CAE1257 LOAD USR79 SLOT=1 FRAME=ethernet_802.3 NAME=USR79_2_E83 BIND IPX USR79_2_E83 NET=48240912 LOAD USR79 SLOT=1 FRAME=ethernet_snap NAME=USR79_2_ESP BIND IPX USR79_2_ESP NET=168B9E3C LOAD USR79 SLOT=1 FRAME=ethernet_II NAME=USR79_2_EII BIND IPX USR79_2_EII NET=D380E0C0 LOAD USR79 SLOT=2 FRAME=ethernet_802.2 NAME=USR79_1_E82 BIND IPX USR79_1_E82 NET=B1EF972E LOAD USR79 SLOT=2 FRAME=ethernet_802.3 NAME=USR79_1_E83 BIND IPX USR79_1_E83 NET=58AC2B56 LOAD USR79 SLOT=2 FRAME=ethernet_snap NAME=USR79_1_ESP BIND IPX USR79_1_ESP NET=1B34CD9A LOAD USR79 SLOT=2 FRAME=ethernet_II NAME=USR79_1_EII BIND IPX USR79_1_EII NET=29EBE6CCDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.