DME560T Ethernet/Fax/Modem May 1996
Packet Driver Installation Overview
Contents
ÄÄÄÄÄÄÄÄ
Introduction
Getting Started
Support Options
Copyrights, Trademarks, and Disclaimers
Introduction
ÄÄÄÄÄÄÄÄÄÄÄÄ
Packet drivers are general drivers used by many operating systems,
especially TCP/IP software packages. If the network system that is
installed specifically mentions support for packet drivers, then
it is likely that it will be able to the provided packet driver
without problems.
The most important thing to remember when installing packet drivers
is the software interrupt vector. The default interrupt vector for
the packet drivers is 0x62 hexadecimal. Most network operating
system supporting packet drivers will try to automatically search for
packet drivers already loaded in the computer's memory. However,
some packages will require a provided interrupt vector for the packet
driver. Furthermore, some packages can only work with certain
interrupt vectors. which require a software interrupt vector parameter
when loading. Please see the section at the end of this document for
description on packet driver parameters.
Since the DME560T PCMCIA Ethernet are software configurable, the
packet driver will automatically detect the hardware parameters.
If the packet driver can properly read the adapter's MAC address
during loading, then the hardware is normally working properly.
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Driver Line Parameters:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
LMPD.COM <packet_int_no> <int> <i/o address>
or
DEVICE=LMPD.SYS <packet_int_no> <int> <i/o address>
Packet Driver Parameters:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
<packet_int_no> is the software interrupt vector number used by the
packet driver program. Options include: 96 to 128.
<int> is the hardware interrupt used by the card. this should match
the PCMCIA drivers interrupt selection for the card. Options
include: 3,4,5,7,9,10,11,12 or 15.
<i/o address> is the hardware i/o address used by the card. This
should match the PCMCIA drivers i/o address selection
for the card.
Support Options
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
We are consistently improving and upgrading our drivers. You are
welcomed to browse through our BBS, and download any drivers,
utilities and help files.
If you still cannot get the DME560T Card working properly, our
technical experts are always ready to help. Please be at your
computer, have your DME560T Card, Drivers Disk, and the following
information available:
* Version number of CARDEN.EXE or any drivers you are
running
* The extact text of any error message displayed on your screen
* The type of computer
* The type of network
For technical support, you may contact your authorized D-Link
distributor, dealer, or the following D-Link headquarters:
In U.S.A. Tel: +1(949)455-1688 Fax: +1(949)455-2521
BBS: +1(949)455-1779 BBS: +1(949)455-9616
In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669
BBS: +1(905)828-6673
In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500
BBS: +44(181)235-5511
In Germany Tel: +49(6196)643011 Fax: +49(6196)28049
BBS: +49(6196)28378
In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299
BBS: +886(2)910-1835
In France Tel: +33(1)30238688 Fax: +33(1)3028689
In Australia Tel: +61(2)4177100 Fax: +61(2)4171077
BBS: +61(2)4173711
In Nordic Tel: +46(40)163330 Fax: +46(40)163340
BBS: +46(40)163343
In Singapore Tel: +657746233 Fax: +657746322
BBS: +657744787
In China Tel: +86(10)4934175 Fax: +86(10)4991648
In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352
In India Tel: +91(22)6172478 Fax: +91(22)6172476
The BBS communication setup information is as follows :
Speed: 2400-14400 baud - Germany
2400-9600 baud - Asia,Taiwan
14400-16800 baud - Canada
9600-14400 baud V32, V32bis, V42, V42bis - U.S.A.
2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe
Parity: None
Data bits: 8
Stop bit : 1
Copyrights, Trademarks, and Disclaimers
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
rights reserved by Microsoft Corporation
All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
reserved by Novell Corporation
Further rights reserved to their respective corporations
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.