CARDWARE.TXT Driver File Contents (

DME560T Ethernet/Fax/Modem                                          May 1996

			Award Cardware Installation

       Getting Started
       Support Options
       Copyrights, Trademarks, and Disclaimers

       The Cardware utilities are supplied by Award and Ventura.

       To use the DME560T Ethernet/Fax/Modem card with
       the Cardware software requires no further intervention.

       When the card is inserted it will beep.  Use CARDCHEK.EXE to 
       check the card has been configured correctly (look at the
       "PCMCIA Hardware" option). 

  Getting Started
       Older versions (dated before 1/7/93)
       Run the 'PC Card Control for Windows' program under Windows.
	If Windows is not installed, edit the CARDWARE.INI file as
	indicated at the end of this section.

       Make sure the DME28X card is inserted into one of your PC's sockets.

       Run 'PC Card Control for Windows' from the Cardware sub-directory.
       Press 'OK' buttons on any card detect errors until you get to the
	main menu.
       Select the 'Cards' option and choose 'Edit'.
       Select Socket A (or wherever the DME28X Card is located) and
	press Enter. If you already have a device in the Defined box
	called DME28X then skip the next 7 steps.

       Select 'New Device' under the 'Defined' devices box.
       Edit the new device to be named 'DME28X'.
       Select IO range 1 Base(Hex) = 300, Length = 32 (16 bit).
       Select IO range 2 Base(Hex) = 2F8, Length = 8  (8 bit).
       Do not alter Mem range 1 or 2.
       Select IRQ level 3. And OK to make changes.
       Back on the 'Edit card' screen, highlight the 'DME28X' device
	in the defined devices box.

       Transfer the DME28X to the 'Associated' box with the 'Include'
       Select OK to complete editting and return to main screen.
       If the DME28X card is not graphically depicted, choose 'Card'
	and 'Reconfigure' the socket which contains the DME28X card.

       If the card is still not configured exit Windows and check the
	CARDWARE.INI file in the CARDWARE sub-directory has had the
	following changes made:

   1=Intelligent DME560T, 13, 6, -1,D-Link, DME560T


   ;name, memBase, memSize, IOBase, IOSize, IRQ, IO2Base, IO2Size, Type, mem2Base, mem2Size, flags
   6=DME560T, 0X0, 0X0, 0X300, 0X20, 0X3, 0X2F8, 0X8, 0X0, 0X0, 0X0, 0X0

   ;Note that the 'NumberOfxxx' numbers may vary from those shown here.
   ;Ensure also that the 'resources' section in the CardWare.ini file has 
   ;requested the system resources for the Gold Card.  This should include
   ;the line as follows:

       Then whenever you insert the DME560T Card it will automatically be
	configured by the Award software.  

       If you still have problems with CARDWARE software try replacing 
	your CARDWARE.INI file with the one supplied on the DME28X Card
	Drivers Disk.

  Support Options
	We are consistently improving and upgrading our drivers. you are
	welcomed at any time to browse through our BBS, and download any
	drivers, utilities and help files.

        If you still cannot get the DME560T working properly, our
	technical experts are always ready to help.  Please be at your
        computer, have your DME560T, Drivers Disk, and the following
	information available:

	* Version number of CARDEN.EXE and any drivers you are running
	* The extact text of any error message displayed on your screen
	* The type of computer
	* The type of network

	For technical support, you may contact your authorized D-Link 
	distributor, dealer, or the following D-Link headquarters:

        In U.S.A.           Tel: +1(949)455-1688      Fax: +1(949)455-2521
                            BBS: +1(949)455-1779      BBS: +1(949)455-9616

	In Canada           Tel: +1(905)828-0260      Fax: +1(905)828-5669
			    BBS: +1(905)828-6673

	In U.K. & Europe    Tel: +44(181)235-5555     Fax: +44(181)235-5500
			    BBS: +44(181)235-5511

	In Germany          Tel: +49(6196)643011      Fax: +49(6196)28049
			    BBS: +49(6196)28378

	In Asia, Taiwan     Tel: +886(2)916-1600      Fax: +886(2)914-6299
			    BBS: +886(2)910-1835

	In France           Tel: +33(1)30238688       Fax: +33(1)3028689

	In Australia        Tel: +61(2)4177100        Fax: +61(2)4171077
			    BBS: +61(2)4173711

	In Nordic           Tel: +46(40)163330        Fax: +46(40)163340
			    BBS: +46(40)163343

	In Singapore        Tel: +657746233           Fax: +657746322
			    BBS: +657744787

	In China            Tel: +86(10)4934175       Fax: +86(10)4991648

	In Tokyo            Tel: +81(3)57512351       Fax: +81(3)57512352

	In India            Tel: +91(22)6172478       Fax: +91(22)6172476

	The BBS communication setup information is as follows :
	     Speed:  2400-14400 baud                           - Germany
		     2400-9600 baud                            - Asia,Taiwan
		     14400-16800 baud                          - Canada
		     9600-14400 baud V32, V32bis, V42, V42bis  - U.S.A.
		     2400-19200 baud V24, V32, V32bis, V42bis  - U.K. & Europe
	     Parity: None
	  Data bits: 8
	  Stop bit : 1

  Copyrights, Trademarks, and Disclaimers
    All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT
    are rights reserved by Microsoft Corporation

    All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are
    rights reserved by Novell Corporation

    Further rights reserved to their respective corporations

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.42