PCNFS.TXT Driver File Contents (56t_1101.zip)

DME560T Ethernet/Fax/Modem                                          May 1996

			  SUN PC-NFS V5.0 Installation

  Contents
  ÄÄÄÄÄÄÄÄ
	Introduction
	Getting Started
	Support Options        
	Copyrights, Trademarks, and Disclaimers

  Getting Started
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	Please read all methods below and choose the one that matches your
	configuration.

	Method 1 -- NDIS Driver
	ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	When using PC-NFS concurrently with LAN Manager, select the "NDIS"
	option from the PC-NFS installation screen.  This option works with
	the NDIS driver included in the provided driver diskette.  Copy the
	files listed below into the \NFS directory of your hard disk.  These
	files will be used in the installation.

	File              Description
	------------     ----------------------------------------------
	NFS-NDIS.SYS      PC-NFS driver program
        LMNDIS.DOS      NDIS driver program
	PROTMAN.SYS       MS PROTOCOL MANAGER
	NETBIND.EXE       MS LAN MANAGER Netbind

	The following lists the contents of the configuration files:

	CONFIG.SYS                                AUTOEXEC.BAT
	ÄÄÄÄÄÄÄÄÄÄ                                ÄÄÄÄÄÄÄÄÄÄÄÄ
	SWITCHES=/F                               SET TZ=EST5EDT
	DEVICE=C:\HIMEM.SYS                       C:\DOS\SMARTDRV.EXE
	DEVICE=C:\EMM386.EXE NOEMS RAM            @PROMPT $p$g
	DOS=HIGH,UMB                              PATH=C:\NFS;C:\WINDOWS;
	BUFFERS=10,0                              C:\LANMAN\NETBIND
	FILES=40                                  SET TEMP=C:\DOS
	STACKS=0,0                                SET NFSDRIVE=C
	LASTDRIVE=G                               SET NFSPATH=C:\NFS
	SHELL=C:\DOS\COMMAND.COM C:\DOS /P        SET TN_DIR=C:\NFS\TELNET
	DEVICE=C:\NFS\PCNFS.SYS /l40              C:\NFS\PRT *
	DEVICE=C:\NFS\SOCKDRV.SYS                 C:\NFS\NET INIT
	DEVICE=C:\LANMAN\PROTMAN.SYS /I:C:\LANMAN
	DEVICE=C:\LANMAN\NFS-NDIS.SYS
        DEVICE=C:\LANMAN\LMNDIS.DOS

	PROTOCOL.INI
	ÄÄÄÄÄÄÄÄÄÄÄÄ
	[PROTOCOL MANAGER]
	      DriverName   = PROTMAN$

        [DME560T_NIF]
                DRIVERNAME = LMNDIS$
	[NFS-NDIS]
	      DriverName   = NFSLINK$
              Bindings     = DME560T_NIF

	To use the NDIS driver, the user needs to obtain a PC-NFS 5.0
        QUIKNDIS diskette which will install all but the DME560T driver.

	Method 2 -- Packet Driver
	ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	When using PC-NFS independently, select the "OTHER" option from the
	PC-NFSinstallation screen.  This option works with the PACKET driver
	included in the provided driver diskette.  Copy the files listed
	below into the \NFS directory of your hard disk. These files will be
	used in the installation.

	File             Description
	------------     -------------------------------------
	PDNFS.SYS        PC-NFS driver program
        LMPD.SYS       Packet driver program

	The following lists the contents of the configuration files:

	CONFIG.SYS                             AUTOEXEC.BAT
	ÄÄÄÄÄÄÄÄÄÄ                             ÄÄÄÄÄÄÄÄÄÄÄÄ
	SWITCHES=/F                            SET TZ=EST5EDT
	DEVICE=C:\HIMEM.SYS                    C:\DOS\SMARTDRV.EXE
	DEVICE=C:\EMM386.EXE NOEMS RAM         @PROMPT $p$g
	DOS=HIGH,UMB                           PATH=C:\NFS;C:\WINDOWS;C:\DOS;
	BUFFERS=10,0                           SET TEMP=C:\DOS
	FILES=40                               SET NFSDRIVE=C
	STACKS=0,0                             SET NFSPATH=C:\NFS
	LASTDRIVE=G                            SET TN_DIR=C:\NFS\TELNET
	SHELL=C:\DOS\COMMAND.COM C:\DOS /P     C:\NFS\PRT *
	DEVICE=C:\NFS\PCNFS.SYS /l40           C:\NFS\NET INIT
	DEVICE=C:\NFS\SOCKDRV.SYS
        DEVICE=C:\NFS\LMNDIS.SYS
	DEVICE=C:\NFS\PDNFS.SYS


	Method 3 -- ODI Driver
	ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	When using PC-NFS concurrently with NetWare 3.1x/4.0, select the
	"ODI" option from the PC-NFS installation screen.  This option works
	with the ODI driver included in the provided driver diskette.  Copy
	the files listed below into the \NFS directory of your hard disk.
	These files will be used in the installation.

	File             Description
	------------     -----------------------------------------
	NFSODI.SYS       PC-NFS driver program
        LMODI.COM      ODI driver program
	LSL.COM          NetWare Link Support Layer
	IPXODI.COM       NetWare IPX/SPX Protocol
	NETX.EXE         NetWare Workstation Shell

	The following lists the contents of the configuration files:

	CONFIG.SYS                             AUTOEXEC.BAT
	ÄÄÄÄÄÄÄÄÄÄ                             ÄÄÄÄÄÄÄÄÄÄÄÄ
	SWITCHES=/F                            SET TZ=EST5EDT
	DEVICE=C:\HIMEM.SYS                    C:\DOS\SMARTDRV.EXE
	DEVICE=C:\EMM386.EXE NOEMS RAM         @PROMPT $p$g
	DOS=HIGH,UMB                           PATH=C:\NFS;C:\WINDOWS;C:\DOS;
	BUFFERS=10,0                           SET TEMP=C:\DOS
	FILES=40                               SET NFSDRIVE=C
	STACKS=0,0                             SET NFSPATH=C:\NFS
	LASTDRIVE=G                            SET TN_DIR=C:\NFS\TELNET
	SHELL=C:\DOS\COMMAND.COM C:\DOS /P     LSL
        DEVICE=C:\NFS\PCNFS.SYS /l40           LMODI
	DEVICE=C:\NFS\SOCKDRV.SYS              C:\NFS\PRT *
	DEVICE=C:\NFS\NFSODI.SYS /b2           C:\NFS\NET INIT
					       IPXODI
					       NETX

	NET.CFG
	ÄÄÄÄÄÄÄ
        Link driver LMODI
	       Frame Ethernet_802.3
	       Frame Ethernet_II
	       Protocol IPX 0 Ethernet_802.3

	If your Novell FILE SERVER is configured to use the Ethernet_802.3
	frame type, add a /b2 switch to the line DEVICE=C:\NFS\NFSODI.SYS
	in your CONFIG.SYS file and add an entry in your NET.CFG file
	defining the two frames types.

  Support Options
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
	We are consistently improving and upgrading our drivers. you are
	welcomed at any time to browse through our BBS, and download any
	drivers, utilities and help files.

        If you still cannot get the DME560T working properly, our
	technical experts are always ready to help.  Please be at your
        computer, have your DME560T, Drivers Disk, and the following
	information available:

	* Version number of CARDEN.EXE or any drivers you are
	  running
	* The extact text of any error message displayed on your screen
	* The type of computer
	* The type of network

	For technical support, you may contact your authorized D-Link 
	distributor, dealer, or the following D-Link headquarters:

        In U.S.A.           Tel: +1(949)455-1688      Fax: +1(949)455-2521
                            BBS: +1(949)455-1779      BBS: +1(949)455-9616

	In Canada           Tel: +1(905)828-0260      Fax: +1(905)828-5669
			    BBS: +1(905)828-6673

	In U.K. & Europe    Tel: +44(181)235-5555     Fax: +44(181)235-5500
			    BBS: +44(181)235-5511

	In Germany          Tel: +49(6196)643011      Fax: +49(6196)28049
			    BBS: +49(6196)28378

	In Asia, Taiwan     Tel: +886(2)916-1600      Fax: +886(2)914-6299
			    BBS: +886(2)910-1835

	In France           Tel: +33(1)30238688       Fax: +33(1)3028689

	In Australia        Tel: +61(2)4177100        Fax: +61(2)4171077
			    BBS: +61(2)4173711

	In Nordic           Tel: +46(40)163330        Fax: +46(40)163340
			    BBS: +46(40)163343

	In Singapore        Tel: +657746233           Fax: +657746322
			    BBS: +657744787

	In China            Tel: +86(10)4934175       Fax: +86(10)4991648

	In Tokyo            Tel: +81(3)57512351       Fax: +81(3)57512352

	In India            Tel: +91(22)6172478       Fax: +91(22)6172476

	The BBS communication setup information is as follows :
	     Speed:  2400-14400 baud                           - Germany
		     2400-9600 baud                            - Asia,Taiwan
		     14400-16800 baud                          - Canada
		     9600-14400 baud V32, V32bis, V42, V42bis  - U.S.A.
		     2400-19200 baud V24, V32, V32bis, V42bis  - U.K. & Europe
	     Parity: None
	     Data bits: 8
	     Stop bit : 1

  Copyrights, Trademarks, and Disclaimers
  ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
  All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
  rights reserved by Microsoft Corporation
 
  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
  reserved by Novell Corporation

  Further rights reserved to their respective corporations


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.24