DME560T Ethernet/Fax/Modem May 1996 IBM Lan Support and Lan Services Installation Contents ÄÄÄÄÄÄÄÄ Introduction Getting Started Support Options Copyrights, Trademarks, and Disclaimers Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ IBM Lan Support 2.x (see below for Lan Services 4.x) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Please use Method 1 or 2 for this installation Method 1 -- Using the .NIF file: Insert the LAN Support diskette in Drive A. Run the install program. A:\> DXMAID [Enter] The following message then appears: "Do you have driver diskettes?" [Yes] Use the Spacebar to switch between "no" and "yes". After copying LAN Support, specify the drive and path of the DOS NDIS files. For example: A:\NDIS2 [Enter] The installation procedure terminates after copying the necessary file. Method 2 -- Modifying the contents of the CONFIG.SYS and PROTOCOL.INI files after installing other NICs: Copy the LMNDIS.DOS file to the directory where your IBM LAN Support program resides. Modify the NDIS device driver statement in the CONFIG.SYS as follows: DEVICE = [drive]:\path\LMNDIS.DOS Modify the PROTOCOL.INI file as follows: BINDINGS = DME560TIBM_NIF : : [DME560TIBM_NIF] DRIVERNAME = LMNDIS$ IBM LAN Services v4.x ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Execute the installation program from the IBM DOS LAN SERVICES diskette Type: >a:\install From the Network card field, select "Network card not shown in list below...". Specify the path for the corresponding oemsetup.inf file of the OEM driver intended for use. Then, press Enter. The program then displays the driver name. Check that the driver configuration is correct. Complete the installation, restart your system to use the DOS LAN Services. Support Options ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ We are consistently improving and upgrading our drivers. you are welcomed at any time to browse through our BBS, and download any drivers, utilities and help files. If you still cannot get the DME560T working properly, our technical experts are always ready to help. Please be at your computer, have your DME560T, Drivers Disk, and the following information available: * Version number of CARDEN.EXE or any drivers you are running * The extact text of any error message displayed on your screen * The type of computer * The type of network For technical support, you may contact your authorized D-Link distributor, dealer, or the following D-Link headquarters: In U.S.A. Tel: +1(949)455-1688 Fax: +1(949)455-2521 BBS: +1(949)455-1779 BBS: +1(949)455-9616 In Canada Tel: +1(905)828-0260 Fax: +1(905)828-5669 BBS: +1(905)828-6673 In U.K. & Europe Tel: +44(181)235-5555 Fax: +44(181)235-5500 BBS: +44(181)235-5511 In Germany Tel: +49(6196)643011 Fax: +49(6196)28049 BBS: +49(6196)28378 In Asia, Taiwan Tel: +886(2)916-1600 Fax: +886(2)914-6299 BBS: +886(2)910-1835 In France Tel: +33(1)30238688 Fax: +33(1)3028689 In Australia Tel: +61(2)4177100 Fax: +61(2)4171077 BBS: +61(2)4173711 In Nordic Tel: +46(40)163330 Fax: +46(40)163340 BBS: +46(40)163343 In Singapore Tel: +657746233 Fax: +657746322 BBS: +657744787 In China Tel: +86(10)4934175 Fax: +86(10)4991648 In Tokyo Tel: +81(3)57512351 Fax: +81(3)57512352 In India Tel: +91(22)6172478 Fax: +91(22)6172476 The BBS communication setup information is as follows : Speed: 2400-14400 baud - Germany 2400-9600 baud - Asia,Taiwan 14400-16800 baud - Canada 9600-14400 baud V32, V32bis, V42, V42bis - U.S.A. 2400-19200 baud V24, V32, V32bis, V42bis - U.K. & Europe Parity: None Data bits: 8 Stop bit : 1 Copyrights, Trademarks, and Disclaimers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporationsDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.