fd16_700.INF Driver File Contents (aha2920_windows_textmode_driver.zip)

;----------------------------------------------------------------
;
; OEMSETUP.INF -- This is a preliminary INF that installs support
;                 for the Adaptec PCI SCSI devices under Win 2000
;
; Copyright (c) 2000 Adaptec Incorporated
;
;----------------------------------------------------------------

;----------------------------------------------------------------
;
; [Version]
;
; Class and ClassGUID are defined in devguid.h
;
;----------------------------------------------------------------
[Version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%Msft%
CatalogFile="fd16_700.cat"
DriverVer=11/14/1999,5.00.2183.1


;----------------------------------------------------------------
;
; [SourceDisksNames]
;
; diskid = description[,[tagfile][,<unused>,subdir]]
;
;----------------------------------------------------------------
[SourceDisksNames]
1 = %FLOPPY_DESCRIPTION%,,,

;----------------------------------------------------------------
;
; [SourceDisksFiles.x86]
;
; filename_on_source = diskid[,[subdir][,size]]
;
;----------------------------------------------------------------
[SourceDisksFiles]
fd16_700.sys= 1,,,,,,,,

;----------------------------------------------------------------
;
; [Manufactuerer]
;
; manufacturer-name 
; %strkey%=models-section-name
; [%strkey%=models-section-name] ...
;
;----------------------------------------------------------------
; Table of Contents
[Manufacturer]
%FDC%=FUTURED

;----------------------------------------------------------------
;
; [ControlFlags]
;
;----------------------------------------------------------------
;[ControlFlags]
;ExcludFromFiles.x86=
;CopyFilesOnly=

;----------------------------------------------------------------
;
; Models
;
; device-description=install-section-name,hw-id[,compatible-id...]
;
; "*" indicates that device is supported by more than one
;     enumerator.
;
;----------------------------------------------------------------
[FUTURED]
%fd16_700.DeviceDesc% = fd16_700_Inst, FD16_700_SCSI
%FD16ISA%             = fd16_700_Inst, *FDC0000
%FD16MCA%             = fd16_700_Inst, *FDC0000
%FD16PCMCIANEW%       = fd16_700_Inst, PCMCIA\Future_Domain_Corporation-SCSI_PCMCIA_Credit_Card_Controller-1BF8
%FD16PCI%             = fd16_700_Inst, PCI\VEN_1036&DEV_0000
%detected_fd16_700.DeviceDesc% = fd16_700_Inst, , DETECTED\fd16_700

;----------------------------------------------------------------
;
; Install
;
;----------------------------------------------------------------
[fd16_700_Inst]
CopyFiles = @fd16_700.sys
LogConfig = *FDC0000.LogConfig

;----------------------------------------------------------------
;
; Services
;
; Flag = 0x1 (SPSVCINST_TAGTOFRONT)
;        Make sure that device loads at
;        the front of its group
;
;----------------------------------------------------------------
[fd16_700_Inst.Services]
AddService = fd16_700, %SPSVCINST_ASSOCSERVICE%, fd16_700_Service_Inst, Miniport_EventLog_Inst

[fd16_700_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\fd16_700.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_isa_addreg

[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001
;[num_of_requests]
HKLM,"SYSTEM\CurrentControlSet\Services\adpu160m\Parameters\Device","NumberOfRequests",0x10001,255

[*FDC0000.LogConfig]
ConfigPriority=HARDRECONFIG
MemConfig=c8000-c9fff,ca000-cbfff,ce000-cffff,de000-dffff
IOConfig=140-14f(3FF::),150-15f(3FF::),160-16f(3FF::),170-17f(3FF::)
IRQConfig=3,4,5,10,11,12,14,15

;----------------------------------------------------------------
;
; Event Log Install
;
;The NT EventLog entries are the same for all SCSI miniports.
;
;----------------------------------------------------------------
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7

;----------------------------------------------------------------
;
; [DestinationDirs]
;
; file-list-section=dirid[,subdir]] ... 
;
;----------------------------------------------------------------
[DestinationDirs]
DefaultDestDir = 12             ; DIRID_DRIVERS (this is IOSubsys on
                                ; Win95, and System32\Drivers on NT)

;----------------------------------------------------------------
;
; [Strings]
;
;----------------------------------------------------------------
[Strings]
Msft = "Microsoft"
SCSIClassName="SCSI and RAID controllers"

FDC = "Future Domain Corporation"
fd16_700.DeviceDesc = "Adaptec AHA-2920 or Future Domain 16XX/PCI/SCSI2Go SCSI Host Adapter"
detected_fd16_700.DeviceDesc = "Adaptec AHA-2920 or Future Domain 16XX/PCI/SCSI2Go SCSI Host Adapter"
FD16ISA = "Future Domain TMC-1650/1660/1670/1680 SCSI Host Adapter"
FD16MCA = "Future Domain MCS-600/700 SCSI Host Adapter"
FD16PCMCIANEW = "Future Domain SCSI2Go PCMCIA SCSI Host Adapter"
FD16PCI = "Future Domain PCI SCSI HOST Adapter"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 4.50