ASUS Tweak Utility Readme (v3.10)
Supported display cards:
V3800 Series
V6600 Series
V6800 Series
V7700 Series
V7100 Series
CUA
================================================================================
Warning!
--------
1. If you AGREE with the statement below, you can start to use this
utility:
"ASUS do not provide any warranty or support for this utility. If you
wish to use this utility, you must be at your own risk. The risk
includes all damages that caused by this utility."
2. If you are not acquainted with the hardware of display card, we
strongly recommend you not to use this utility. Because inappropriate
settings can cause SERIOUS DAMAGES in your graphic chip, display
card and even relative components!
3. ASUS do not recommend any overclocking settings on your hardware.
Overclocking can causes overheat which will damage your chip, although
there has been an execellent cooling fan on your ASUS display card.
Important Notes
---------------
1. This utility is provided for fine tuning your display card to make
maximum stablility to your system. It is for Windows 98, Windows NT 4.0, and
Windows 2000.
2. Please select "Start->Programs->ASUS->Tweak Utility->Tweak" to
launch Tweak utility.
3. If you have set a tweak settings and have problem after booting, you
can boot into "Windows Safe Mode" and then run
"Start->Programs->ASUS->Tweak Utility->Tweak Safe Mode Recovery"
to clear previous settings.
Release Notes (V3.10)
----------------------
1. Support CUA.
Release Notes (V3.09)
----------------------
1. Support V7100.
Release Notes (V3.08)
----------------------
1. Support V7700.
Release Notes (V3.07)
----------------------
1. Prevent non-administrator from using Tweak in Windows 2000/NT.
Release Notes (V3.06)
----------------------
1. Support V7700 Deluxe.
Release Notes (V3.05)
----------------------
1. Support V7700/64M.
Release Notes (V3.04)
----------------------
1. Don't support V3400 Series.
Release Notes (V3.03)
----------------------
1. Support V7700 Pure.
Glossary
--------
MCLK: Memory Clock
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.