;************************************************************************
;*
;* Chapter 1. How to use this patch file?
;*
;* This file (ODI69.TXT) contains info. that helps you patch
;* 'RTGBODI.COM'(v1.14) file into your own ODI driver.
;*
;* To generate your custom driver, please follow the steps
;* described below:
;*
;* a). Follow the instructions to edit the message area in each
;* line. Save this file when you finish editing.
;* ( see CHAPTER 2 for more details ! )
;*
;* !!! NOTE: DO NOT EDIT THE OFFSET AND LENGTH AREA !!!
;*
;* b). Make sure that you have the following files in your working
;* directory:
;*
;* RTPATCH.EXE -------> The patch execution file
;* RTGBODI.COM -------> RTL8169 ODI driver file
;* ODI69.TXT -------> RTGBODI.COM patch info. file
;*
;* c). After you decide the name for your packet driver,
;* simply type:
;*
;* > RTPATCH RTGBODI.COM ODI69.TXT <put driver name here> <?
;*
;* !!! NOTE: DO NOT USE THE SAME DRIVER NAME AS THE ORIGINAL
;* DRIVER!!!
;*
;* d). If no error occurs, you should find your custom driver is
;* generated under your working directory.
;*
;*
;* Chapter 2. How to edit this file ?
;*
;*
;* Each line in this file contains a display message info. of the
;* driver. Each line has the same format:
;*
;* <offset> <length> <message>
;* e.g.
;* 1266 28 'Packet driver for RTL8129',0dh,0ah,'$';
;* ---- -- ----------------------------------------
;*
;* Do not edit here! | | EOL
;* Put your own message here! |
;* (HEX) (DEC) delimiter
;*
;*
;*
;* *NOTE: DO NOT EDIT THE <offset> AND <length> AREA !!!
;*
;* *NOTE: Anything after comment character ';' will be ignored!
;*
;* *NOTE: Always add ';'(EOL) at end of each line!
;*
;* *NOTE: If delimiter is needed, keep delimiter intact! In this case,
;* leave the '$' as the last byte.
;*
;* *NOTE: 0H can only be added as delimiter! Message after 0H will be lost!
;*
;* *NOTE: Total length of your message should not exceed <length>.
;*
;* *NOTE: If you must use the comment character (;) in your message,
;* put 3bh instead of ';'. Same for (').
;*
;* *NOTE: Do not exceed 250 characters in each line.
;*
;************************************************************************
;************************************************************************
; Put your driver long name here
;************************************************************************
d1e 1 5ah;
d1f 91 'Realtek RTL8169/RTL8110 Family Gigabit Ethernet Network Adapter ',0h; ; max --> 75, NICLongName
;************************************************************************
; Put your driver name here
;************************************************************************
d7a 1 0bh; Length of your driver name ----> 6 for "RTGBODI
d7d 12 'RTGBODI ',0h; maximum ---> 12 (11 for drvier name and 1 for delimiter 0h), NICShortName
;************************************************************************
; Put your DRIVER LINK name here
;************************************************************************
ed0e 11 'RTGBODI ',0h; maximum ---> 11 (10 for drvier name and 1 for delimiter 0h), DRIVER LINK
;************************************************************************
; Put your message here
;************************************************************************
ec3f 81 'Realtek RTL8169/RTL8110 Family Gigabit Ethernet Network Adapter ',0h; ;79,DriverSignOnMessage
ec90 36 'Driver Version: v1.14 (09-11-2006)',0Dh,0Ah
ecb5 77 '(c) Copyright 2006, by Realtek Semiconductor Corp. All rights reserved. ',0h;
edcc 42 'No RTL8169/RTL8110 Family ',0Dh,0Ah; ; NICNotFound
edf6 63 ' Gigabit Ethernet Network Adapter found!! ',0Dh,0Ah,0h;
ef41 114 'More than 4 RTL8169/RTL8110 Ethernet Network Adapter cards found. Driver will support only 4 cards. ',0Dh,0Ah,0h; ; TooManyBoards
;************************************************************************
; Put your Vendor ID and Device ID
;************************************************************************
;RTL8169
f208 2 ech,10h; Vendor ID
f20a 2 69h,81h; Device ID
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.