This document describes standard names of mixer controls.
Syntax: SOURCE [DIRECTION] FUNCTION
DIRECTION:
<nothing> (both directions)
Playback
Capture
Bypass Playback
Bypass Capture
FUNCTION:
Switch (on/off switch)
Volume
Route (route control, hardware specific)
SOURCE:
Master
Master Mono
Hardware Master
Headphone
PC Speaker
Phone
Phone Input
Phone Output
Synth
FM
Mic
Line
CD
Video
Zoom Video
Aux
PCM
PCM Front
PCM Rear
PCM Pan
Loopback
Analog Loopback (D/A -> A/D loopback)
Digital Loopback (playback -> capture loopback - without analog path)
Mono
Mono Output
Multi
ADC
Wave
Music
I2S
IEC958
Exceptions:
[Digital] Capture Source
[Digital] Capture Switch (aka input gain switch)
[Digital] Capture Volume (aka input gain volume)
[Digital] Playback Switch (aka output gain switch)
[Digital] Playback Volume (aka output gain volume)
Tone Control - Switch
Tone Control - Bass
Tone Control - Treble
3D Control - Switch
3D Control - Center
3D Control - Depth
3D Control - Wide
3D Control - Space
3D Control - Level
Mic Boost [(?dB)]
PCM interface:
Sample Clock Source { "Word", "Internal", "AutoSync" }
Clock Sync Status { "Lock", "Sync", "No Lock" }
External Rate /* external capture rate */
Capture Rate /* capture rate taken from external source */
IEC958 (S/PDIF) interface:
IEC958 [...] [Playback|Capture] Switch /* turn on/off the IEC958 interface */
IEC958 [...] [Playback|Capture] Volume /* digital volume control */
IEC958 [...] [Playback|Capture] Default /* default or global value - read/write */
IEC958 [...] [Playback|Capture] Mask /* consumer and professional mask */
IEC958 [...] [Playback|Capture] Con Mask /* consumer mask */
IEC958 [...] [Playback|Capture] Pro Mask /* professional mask */
IEC958 [...] [Playback|Capture] PCM Stream /* the settings assigned to a PCM stream */
IEC958 Q-subcode [Playback|Capture] Default /* Q-subcode bits */
IEC958 Preamble [Playback|Capture] Default /* burst preamble words (4*16bits) */
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.