README.TXT Driver File Contents (tamarack_tc6020_treiber_win9x-me-nt-2000-xp_dos_linux_os-2_novel... -40.exe)


           TAMARACK TC6020 10/100 FAST ETHERNET ADAPTER
                          Setup Program


This file illustrates the usage of the SETUP program.

(A) There are five items in the main menu.

    (1). Show Configuration
    (2). Diagnose
    (3). Change Current Setting
    (4). Utility
    (5). On-line Help

    Press 'ENTER' to choose the item, 'ESC' to exit the
    program and use 'UP/DOWN ARROW' to scroll the items.

(B) The usage of each item

    (1) Show Configuration
        Choose "Show Configuration" to look at the current
        PCI Lan Card Configuration.

    (2) Diagnose
        Choose "Diagnose" if you want to verify that your
        PCI Lan Card is working correctly.

        After entering "Diagnose", there is a sub-menu with
        two items.

             1. Basic Diagnosis
             2. Network Test (Tx/Rx)

             Choosing "Basic Diagnosis" will test NIC registers
             read/write, cable link status and MII loopback.

             Choosing "Nework Test (Tx/Rx)" will test the normal
             transmission and reception of this Lan Card. In
             this test, the card need to be attached on the
             Network.

    (3) Change Current Setting
        Choose "Change Current Setting" to setup new
        configuration of your PCI Lan Card.

        After entering "Change Current Setting", there is a
        sub-menu with two items.

             1. BootROM Set
             2. Power Management Function Set

             After choosing "BootROM Set", you can change the
             size and speed of the BootROM on this Land Card.

             After choosing "Power Management Function Set",
             you can change the power management capabilities
             of this Lan card , such as enable/disable the
             capability to receive magic packet. And you can
             set new power state of this Lan Card.

             Note: If you enable the capablity of receiving
                   Wake-Up frame , you should input a file
                   contain wake-up frame pattern to program
                   the related wake-up registers on this Lan
                   Card. (To reference wake-up frame pattern
                   , see the sample file 'wakeup.dat'.)

    (4) Utility
        After entering "Utility", there is a sub-menu with
        three items.

             1. Transmit Magic Pkts
                Use this item to send magic packets to wake up
                another sleeping machine.

             2. Transmit Wake-up Frames
                Use this item to send wake up frame to wake up
                another sleeping machine. Because the pattern
                of wake-up frame is user-defined, you need to
                input a file name which contains the packet.

             3. Transmit Flow Control Pkts
                Use this item to send flow control packets to
                another machine.

    (5) On-line Help
        Choose "On-line Help" to see this file.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.59