TAMARACK TC6020 10/100 FAST ETHERNET ADAPTER
SCO Unix Driver
for SCO 5.x Installation Guide
Installation:
1. login as root user (on maintenance mode).
2. use "custom" utility to install the TC6020 SCO 5.x software package.
2.1 doscp a:/<path>/tc6020.dst /tmp/VOL.000.000.
2.2 execute "custom" utility,
2.3 select "Software" item in the "Software Manager (custom) on
hostname" window to get into pull down menu,
move to "Install New...", then press [Enter] buttom,
2.4 |------------ Begin Installation on hostname -----------|
| |
| What host (machine) do youwant to install from? |
| --------------------------------------------------- |
| | <*> From hostname | |
| | < > Fraom another host | |
| --------------------------------------------------- |
| |
|-------------------------------------------------------|
| [Continue] [Cancel] [Help] |
|-------------------------------------------------------|
select from hostname and press [Continue] buttom,
2.5 |--------------------------- Select Media ---------------------------|
| |
| Insert media, and select media device. |
| |
||---------------------------------------------------------| |
||Media Device:|| Floppy Disk Driver 0 __________________|v| |
||---------------------------------------------------------| |
| ||------------------------------------------| |
| || Floppy Disk Driver 0 | | |
| -------------|| SCSI CD-ROM Driver 0 | |---------|
| [Continue] || *Media Images | | [Help] |
|--------------------------------------------------------------------|
press [] to get into pull down menu, select "Media Images" and
press [Continue] buttom,
2.6 |---------------------- Enter Image Directory -------------------------|
| |
|Enter the full path to the directory containing media images. |
| |
|Image Directory: | /tmp_______________________________________________|
| |
|Note: media images must follow the naming convention VOL.000.000, etc.|
|----------------------------------------------------------------------|
|[OK] [Cancel] [Help]|
|----------------------------------------------------------------------|
input the path name where VOL.000.000 is located,
and press [OK] buttom,
2.7 |---------------------- Enter Image Directory --------------------------|
| |
| Installing: TAMARACK TC6020 Fast Ethernet Card Drivers(version 3.0.0) |
| Do you want a FULL or PARTIAL installation? |
| |
|-----------------------------------------------------------------------|
|[FULL] [Partial] [Cancel] [Help] |
|-----------------------------------------------------------------------|
press [FULL] buttom, and wait for the following message is displayed:
|----------- Question ------------|
| Installation Complete |
|---------------------------------|
| [OK] |
|---------------------------------|
2.8 press [Enter] buttom then you will find out that
"TAMARACK TC6020 Fast Ethernet Card Drivers"
is added to the package list.
3. use "netconfig" utility to install the driver.
3.1 select "Hardware" item from the "Network Configuration Manager" window
to get into pull down menu, move to "Add new LAN adapter",
then press [Enter] buttom,
3.2 |------------------------ Add new LAN adapter -----------------------|
| Select network adapter to be added: |
| ------------------------------------------------------------------ |
| |* 3COM EtherLink 16/16TP Adapter | |
| | . | |
| | . | |
| | . | |
| | . | |
| | . | |
| | . | |
| | . | |
| | TAMARACK TC6020 10/100 Fast Ethernet Card | |
| -----------------------------------------------------------------| |
|--------------------------------------------------------------------|
| [Continue] [Cancel] [Help] |
|--------------------------------------------------------------------|
use [] key to move to "TAMARACK TC6020 10/100 Fast Ethernet Card"
and then press [Continue] buttom,
3.3 |-------------------- Network Driver Configuration -----------------------------|
| |
| Enter the configuration of TAMARACK TC6020 10/100 Fast Ethernet Card: |
| |
| -------------------------- [ Advanced |
| Device#: | |0___________________|v| Options ] |
| -------------------------- |
| * - indicates conflict with other hardware. |
|-------------------------------------------------------------------------------|
| [OK] [Cancel] [Help] |
|-------------------------------------------------------------------------------|
you can set the Device# to select some specified tc6020 card. if you
do not make sure this value, you do not change the value, continue the
installation, this driver will search PCI Ethernet card automatically.
when you finish the settings, press [OK] buttom,
3.4 |---------------------------- Information ---------------------------|
| |
| Please verify adapter is set to the configuration just entered. |
|--------------------------------------------------------------------|
| [OK] |
|--------------------------------------------------------------------|
press [Enter] buttom,
3.5 |--------------------------- Add protocol -------------------------- |
| Select one networking product to be added to |
| ------------------------------------------------------------------ |
| | HW TAMARACK TC6020 10/100 Fast Ethernet Card | |
| | * - SCO IPX/SPX | |
| | - SCO TCP/IP | |
| ------------------------------------------------------------------ |
|--------------------------------------------------------------------|
| [Add] [Cancel] [Help] |
|--------------------------------------------------------------------|
use [] key to move cursor to "SCO TCP/IP" then press [Add] buttom,
3.6 |-------------------- SCO TCP/IP Configuration ----------------------|
| |
| |
| |
| Local Host Name: | hostname_______________| [ Advanced ] |
| IP Address: | 172.10.10.10___________| Options... |
| Netmask: | 255.0.0.0______________| |
| Broadcast Address: | 10.255.255.255_________| |
| Domain Name: | hostname.com___________| |
| TCP connections: | 256 ___________________| |
| Pseudo ttys: | 32_____________________| |
| |
|--------------------------------------------------------------------|
| [OK] [Cancel] [Help] |
|--------------------------------------------------------------------|
input the related information then press [OK] buttom,
3.7 |------------------------------ Message -----------------------------|
| The following products were successfully configured into the system|
| SCO TCP/IP | |
| TAMARACK TC6020 10/100 Fast Ethernet Card - Deivce #0 |
|--------------------------------------------------------------------|
| [ OK] [Help] |
|--------------------------------------------------------------------|
press [OK] buttom,
3.8 at "Hardware" item press [Enter] buttom to get into pull down menu
then move to "Exit" then press [Enter] buttom,
3.9 |--------------------------- Question ---------------------------|
| The Unix Kernel must be re-linked before the changed |
| ??? made here will have an effect. |
| Do you want to re-link the kernel now? |
|----------------------------------------------------------------|
| [ YES ] [Help] |
|----------------------------------------------------------------|
press [YES] buttom to relink to kernel,
3.10 Do you want this kernel to boot by default (y/n) y
3.11 Do you want to the kernel environment rebuilt (y/n) y
4. reboot this UNIX system.
#shutdown -y -g0
Use:
1. login as root user (on maintenance mode).
2. use "netconfig" utility to reconfigure the driver.
|--------------------- Network Configuration Manager --------------------|
| ---------------------------------------------------------------------- |
| | Hardware Protocol | |
| ---------------------------------------------------------------------- |
| Current networking configuration: |
| -----------------------------------------------------------------------|
| ---------------------------------------------------------------------- |
| | * HW SCO TCP/IP Loopback driver | |
| | SCO TCP/IP | |
| | - SCO NFS Runtime System | |
| | HW TAMARACK TC6020 10/100 Fast Ethernet Card - Device #0 | |
| | SCO TCP/IP | |
| | - SCO NFS Runtime System | |
| | | |
| | | |
| | | |
| ---------------------------------------------------------------------- |
| Current configuration of the networking software in this system |
|------------------------------------------------------------------------|
use [TAB] key to select "HW TAMARACK TC6020 10/100 Fast Ethernet Card - Device #0",
then select "Hardware" item to get into pull down menu, move to
"Modify hardware configuration", then press [Enter] buttom,
3. reboot this UNIX system.
#shutdown -y -g0
Histories of Release:
***) 3.00, 10-4-2001
First release.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.