TAMARACK TC6020 10/100 FAST ETHERNET ADAPTER Novell ODI Server Driver Contents: --------- 1. File Description 2. Driver Installation for NetWare Server 3. Parameters Description 1. File Description ------------------- Filename Description ================= ===================================================== README.TXT Presents a summary of the contents for NetWare Server driver installation. TC6020.LAN TC6020 based 32-bit ODI Driver This driver complies with NetWare ODI Server driver SPEC 3.31. TC6020.LDI The TC6020 driver installation file for Netware 5.x / Netware 4.x. 4.X\NBI.NLM NetWare Server 4.X Bus Interface module. 4.X\MSM.NLM NetWare Server 4.X LAN driver Media Support Module (MSM). 4.X\ETHERTSM.NLM NetWare Server 4.X LAN driver Topology Specific Module (TSM) for Ethernet. 3.12\ETHERTSM.NLM NetWare Server 3.12 driver Topology Specific Module (TSM) for Ethernet. 3.12\NBI31X.NLM NetWare Server 3.12 Bus Interface module. 3.12\MSM31X.NLM NetWare Server 3.12 LAN driver Media Support Module (MSM). 2. Driver Installation for NetWare Server ----------------------------------------- ** Driver Installation for NetWare Server 3.12 ** a. Insert Driver Diskette in your PC's floppy drive (A: or B:). b. Change to the NetWare Server directory. c. Copy the following files from Driver Diskette to the NetWare Server directory. \NOVELL\SERVER\3.12\NBI31X.NLM \NOVELL\SERVER\3.12\MSM31X.NLM \NOVELL\SERVER\ETHERTSM.NLM \NOVELL\SERVER\TC6020.LAN d. Sample AUTOEXEC.NCF for NetWare Server 3.12 AUTOEXEC.NCF ============ LOAD C:NBI31X LOAD C:MSM31X LOAD C:ETHERTSM LOAD C:TC6020 SLOT=2 FRAME=ETHERNET_802.2 NAME=MY_8022 LOAD C:TC6020 SLOT=2 FRAME=ETHERNET_802.3 NAME=MY_8023 LOAD C:TC6020 SLOT=2 FRAME=ETHERNET_II NAME=MY_II LOAD C:TC6020 SLOT=2 FRAME=ETHERNET_SNAP NAME=MY_SNAP BIND IPX MY_8022 NET=10 BIND IPX MY_8023 NET=20 BIND IPX MY_II NET=30 BIND IPX MY_SNAP NET=40 ** Driver Installation for NetWare Server 4.X ** a. Update Netware Server to 4.2 . (If dont update to 4.2, use diskette update file "MSM.NLM, ETHERTSM.NLM") b. Run NetWare Server System . c. When the Server prompt appears, load the NetWare Server Installation Utility ==> "LOAD INSTALL" d. Select "Driver options" from the "Installtion Options" menu. e. Select "Configure network drivers" from the "Driver Options" menu. f. Select "Select a driver" from the "Additional Driver Actions" menu g. Press <Ins> to install a unlisted driver, then press <F3> to specify a different path. h. Insert Driver Diskette in your PC's floppy drive and specify the path A:\NOVELL\SERVER\4.X. i. Select "TAMARACK TC6020 10/100 Fast Ethernet Adapter" from the "Select a driver to install:" menu. j. If necessary, select "Select/Modify driver parameters and protocols" from the "Board TC6020_1 (Driver TC6020) Actions" memu. k. Follow instructions to complete driver installation. ** Driver Installation for NetWare Server 5.X ** a. Run NetWare Server System . b. When the Server prompt appears, load the NetWare Server Installation Utility ==> "LOAD NWCONFIG" c. Select "Driver options" from the "Installtion Options" menu. d. Select "Configure network drivers" from the "Driver Options" menu. e. Select "Select a driver" from the "Additional Driver Actions" menu f. Press <Ins> to install a unlisted driver, then press <F3> to specify a different path. g. Insert Driver Diskette in your PC's floppy drive and specify the path A:\NOVELL\SERVER\4.X. h. Select "TAMARACK TC6020 10/100 Fast Ethernet Adapter" from the "Select a driver to install:" menu. i. If necessary, select "Select/Modify driver parameters and protocols" from the "Board TC6020_1 (Driver TC6020) Actions" memu. j. Follow instructions to complete driver installation. Sample AUTOEXEC.NCF for NetWare Server AUTOEXEC.NCF (one board) ======================== LOAD TC6020 SLOT=2 FRAME=ETHERNET_802.2 NAME=MY_8022 LOAD TC6020 SLOT=2 FRAME=ETHERNET_802.3 NAME=MY_8023 LOAD TC6020 SLOT=2 FRAME=ETHERNET_II NAME=MY_II LOAD TC6020 SLOT=2 FRAME=ETHERNET_SNAP NAME=MY_SNAP BIND IPX MY_8022 NET=10 BIND IPX MY_8023 NET=20 BIND IPX MY_II NET=30 BIND IPX MY_SNAP NET=40 3. Parameter Description ------------------------ The following parameters are used in TC6020.LAN. a. SLOT : Specifies which adapter is enabled when multiple TC6020 based adapters are found in your computer. Ex: LOAD TC6020 SLOT=3 FRAME=ETHERNET_802.2 LOAD TC6020 SLOT=4 FRAME=ETHERNET_II b. FRAME : Specifies which frame type is used by the driver. Accepted values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and Ethernet_SNAP. Ex: LOAD TC6020 FRAME=ETHERNET_802.2 LOAD TC6020 FRAME=ETHERNET_802.3 LOAD TC6020 FRAME=ETHERNET_II LOAD TC6020 FRAME=ETHERNET_SNAP c. NODE : Use a different address to replace the node address burned in EEPROM. Ex: LOAD TC6020 NODE=004095888888 4. SPEED : Specifies which medium type is used by the driver. Accepted vaules are AUTO,1000FULL,1000HALF,100FULL ,100HALF,10FULL and 10HALF. Ex: LOAD TC6020 SLOT=3 FRAME=ETHERNET_802.2 SPEED=100FULLDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.