Fast Ethernet 10/100 PC Card Setup
for Microsoft Windows 95
-----------------------------------------------------------------
Before You Begin
Setup
Before You Begin
----------------------------------------------------------------------
Thanks for choosing the Fast Ethernet 10/100 PC Card. Before
attempting to install the card, we highly recommend that you read
the User Guide that came with your card in order to install both your
PCMCIA socket & card services AND your network driver.
Setup
----------------------------------------------------------------------
The PC Card is a plug-and-play with 10BaseT/100BaseTX auto-detect
network adapter that is designed to be automatically detected by
Windows 95 as soon as you insert it into your computer.
Before you begin the installation, you should have your
original Windows 95 CD-ROM handy. Windows 95
may ask for it in order to install special files onto your
computer during the network driver setup. When this
occurs, insert your CD-ROM or other media into the
drive and tell Windows 95 to look in the \win95
directory on the appropriate drive. For example, if your
CD-ROM is drive D: on your system, and Windows 95
is requesting a file from it, you would type in D:\win95
and press Enter in order to inform 95 of the CD-ROM's
location. If Windows 95 came pre-installed on your
computer, you might also be able to find the files you
need in the c:\windows\options\cabs folder on your
hard drive if there is one. Some versions of the
Windows 95 CD-ROM may be structured differently.
See your Windows 95 user guide for additional
information if necessary.
-------------------------------------------------
IMPORTANT: Novell NetWare 4.x Users
If you will be using Windows 95 to connect to a
Novell NetWare 4.x file server, follow the Novell
NetWare Client32 setup directions that are found
in the CLIENT32 directory on the PC Card
disk INSTEAD of following the instructions below.
-------------------------------------------------
There are currently two versions of Windows 95:
- the original release (version A)
- a later release (also known as OSR2, or version B)
The installation procedure for the network driver will
vary slightly depending on the version of Windows 95
that you are using.
To begin the setup:
1. Start up your computer. After Windows 95 is up and
running, put the software disk that came with the
PC Card into drive A.
2. Insert the PC Card into your computer's
PCMCIA slot. Windows 95 will automatically detect
the presence of the card in your computer.
3. If a window that reads Update Device Driver
Wizard appears, you are using Windows 95 version B.
Follow the appropriate setup instructions for either
version A or B below
Windows 95 Version A Setup
After inserting the PC Card into your PC, a New
Hardware Found window appears.
Click on the Driver from disk provided by hardware
manufacturer option, then click OK.
Type a:\ and click OK. Windows 95 will begin copying
files. You may be asked to supply your original Win95
CD-ROM. Follow the directions on your screen.
When asked if you want to restart your computer,
choose Yes. Turn to the "Completing the Installation"
section below now.
Windows 95 Version B Setup
When the Device Driver Wizard window appears,
click on the Next button. Windows 95 will auto-
matically check the disk that is in the floppy drive for
PC Card network drivers.
When the Network Everywhere Fast Ethernet 10/100 PC Card
message appears, click on Finish. Windows 95 will begin copying files.
You may be asked to supply your original Windows 95 CD-ROM.
When asked if you want to restart your PC, click Yes.
Completing the Installation
After your PC restarts, log in if you are asked to do so.
If you haven't logged in before, enter the user name and
password that you would like to use if prompted.
Look at the PC Card's cable coupler. If your cabling is properly
attached and the network is detected, the green Link and Activity
lights will be on, and both the lights will be flickering or solid.
The Link light is for use with Link and Frame received.
The Activity light is for use with Power On and Frame Transmitted.
The third amber light is for use with 100BaseTX indication.
To make sure that your system's network components
were installed properly, click on Start, Settings,
Control Panel, and double-click on the Network icon.
The Network window will appear. Verify that all of the
components you'll need to access your network are
properly installed. If any are missing, you can add them
now. When you're finished, restart your computer.
Your PC Card network driver has been successfully
installed. Proceed to the next section to enable File and
Printer Sharing.
File & Printer Sharing in Windows 95
File and printer sharing will allow your computer to
share printers, documents, disk drives, CD-ROMs, and
much more with other computers.
Before enabling file & printer sharing, you should
prepare your computer to be used with any file servers
that may be on the network.
If you are not using a Novell NetWare server on your
network, skip to the NT FILE SERVER note below. Otherwise:
NOVELL NETWARE FILE SERVER
If you are using your computer with a Novell NetWare
file server, click on Start, Settings, Control Panel, and
double-click on Network. Change the Primary Logon
to Client for NetWare Network. Next, double-click on
the Client for NetWare Networks. Put your server's
name in the Preferred Server box. Enable the Logon
Script Processing box. Click on OK, then click OK
again. Restart your computer and Windows 95 to
enable the changes. Note: If your computer will be
logging into a 4.x Novell server, you will need to also
install Client32 drivers for NetWare. To obtain Client32
drivers, contact Novell or see your NetWare
documentation.
NT FILE SERVER
If you are not using a Windows NT file server on your
network, skip to step 1 below to enable file & printer
sharing.
If you are using your computer with a Windows NT file
server, click on Start, Settings, Control Panel, double-
click on Network. Change the Primary Logon to Client
for Microsoft Networks. Double-click on Client for
Microsoft networks. Put a check
in the Log into Windows NT
domain box. Put your NT
domain name into the Windows
NT domain name area. When
you're finished, click OK, then
OK again. Restart your
computer and Windows 95 to
enable the changes.
Follow the steps below to enable file & printer sharing.
1. Start up Windows 95 if you haven't already. If you
are asked to log in, be sure to enter your user name
and password, then click on OK. Next, click on
Start, followed by Settings, Control Panel, and the
Network icon.
2. Click on the Configuration window tab. If you see
File and printer sharing for Microsoft Networks
item in the list of items that appears, close the
Control Panel and go to Enabling File Sharing or
How to Share Printers below. Otherwise, see step 3.
3. Click on the File and Print Sharing button.
4. If you want other users to be able to access your
files, use your mouse to put a checkmark next to the
I want to be able to give others access to my files
option. If you want others to be able to use printer(s)
that are plugged into your computer, put a check-
mark next to the I want to allow others to print to
my printers option. When finished, click OK.
You'll now see a text line that reads File and printer
sharing for Microsoft Networks in the
Configuration list box. (If you don't see it, you
might need to use the scroll bars to scroll through the
list). Click on OK. When 95 asks if you want to
restart your computer, click Yes.
Enabling File Sharing
After following steps 1-4 above, double-click on your
My Computer icon. A window of available disk drives
will appear. Using your right mouse button, click once
on the drive that you want to make available to other
users. Click on Sharing, followed by the Sharing tab.
Click on Share As. In the Share Name box, give your
computer a name (you can call it whatever you want--
Mary's Computer, etc.). Next, decide on the type of
access that you want to give other users.
Read-Only access lets other users view the files on your PC.
Full access lets users create, change, or delete files on your system.
Depends on Password lets users have Read-Only and/or Full access,
depending on the password that you decide to share with them.
Use your mouse to select the type of file sharing access
that you want other users to have. If you want to assign
access password(s), type them into the Password
box(es).
When you're done, click on the Apply button, followed
by OK. Your drive(s) can now be accessed from other
users whenever they click on their Windows 95
Network Neighborhood icons. If a user tries to access
one of your drives that's password-protected, he or she
will be asked for the appropriate Read-Only or Full
access password.
How to Share Printers
After following steps 1-4 above, double-click on your
My Computer icon. Click on the Printers folder. A
window of available printers will appear. Using your
right mouse button, click once on the printer that you
want to share with other users. Click on Sharing,
followed by the Sharing tab. Click on Share As. In the
Share Name box, give a name to the printer you're about
to share (Jack's HP4, for example). If you want to
assign a password to the printer so only certain users
can access it, type a password in the Password box.
When you're done, click on the Apply button, followed
by OK. Your printer(s) are now shared.
When you're finished, restart your computer, log into
your network, and double-click on Network
Neighborhood. You should be able to see the other
computers on your network. The installation is
complete.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.