1. via.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (via.zip)

   Server Driver for NetWare 3.11

   Introduction:
   -------------
   This document describes the procedure to install the NetWare v3.11
   server driver for PCI Ethernet adapter.

   Location of Driver:	   \NETWARE\SERVER\311\PCINWSRV.LAN


   Installation Procedure:
   -----------------------
      Before you start the installation  process,  make sure that
      the Novell NetWare 386 v3.11 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.

      1. Copy all PCINWSRV.LAN related files from this Driver Diskette
	 subdirectory A:\NETWARE\SERVER\311 into the NetWare 386 SERVER
	 hard disk. (If some files exists, rename the  existing files.)

      2. Run  SERVER.EXE  from	your  server.  You will see a series of
	 NetWare messages on screen.

      3. When the NetWare 386 prompt appears (indicated by a colon), load
	 your server driver. Simply type:

	 : LOAD C:\SERVER.311\LSLENH <Enter>
	 : LOAD C:\SERVER.311\PCINWSRV <Enter>

      4. Bind IPX to the adapter driver. At the NetWare server prompt,
	 type:

	 :BIND IPX TO PCINWSRV <Enter>

      5. After you press <Enter>, the computer prompts you the Network
	 Number. For details on how to assign this number, please refer
	 to your NetWare 386 Installation Manual.

      6. Add the load and bind statements you require to the server's
	 AUTOEXEC.NCF file so  that  the  LAN  driver  will be loaded
	 automatically once the server starts up.


   NOTES:
   ------
      1. Installing Multiple LAN Adapters:
	 The keyword "EtherID" is the ethernet ID of a adapter. This
	 keyword is provided for multiple LAN adapters in a single server
	 by the driver PCINWSRV.LAN.  So, add EtherID in LOAD commands. For
	 example:

	 LOAD PCISRV EtherID=00C026000001 FRAME=Ethernet_802.2 NAME=LAN_A
	 BIND IPX TO LAN_A NET=11
	 LOAD PCINWSRV EtherID=00C026000002 FRAME=Ethernet_802.3 NAME=LAN_B
	 BIND IPX TO LAN_B NET=22

      2. Installing One LAN Adapter with Multiple Frame Types:
	 When  binding multiple frame types to one adapter, enter a LOAD
	 and BIND statement for each frame type. Each LOAD statement will
	 use a different network number is required on the bind statement.
	 You need  to supply  a name on each load line in order to avoid
	 being	prompted  for which  board to bind IPX to. If you do not
	 have the name option in the AUTOEXEC.NCF , it will not  execute
	 completely without user intervention.	Example:

	   LOAD PCINWSRV FRAME=ETHERNET_802.3 NAME=IEE8023
	   BIND IPX TO IEE8023 NET=77777
	   LOAD PCINWSRV FRAME=ETHERNET_802.2 NAME=IEE8022
	   BIND IPX TO IEE8022 NET=88888

   If any problem occurs during the binding process, the screen will display
   the	error  messages.  Please refer to  your NetWare 386 manual for
   details on these messages.