disk Firmware Update Bootable CD ( Version: SAS_SATA_A04 ) This CD has been successfully created. Dell(TM) 5094 Diagnostics This CD is created using hard-disk emulation and only this file will be visible from windows. Boot this CD on a server, with the CD-ROM device enabled as the first boot device and then the bootable filesystem will be visible as files on the C: drive. ----------------- Table Of Contents ----------------- 1.0 Documentation 2.0 Starting the Application 3.0 Running the Application 3.1 Automatic Batch Mode 3.2 Interactive Mode 4.0 Notes on the Application 5.0 Supported Systems 6.0 Supported Drives 6.1 SAS Drive Releases 6.2 SATA Drive Releases ----------------- 1.0 Documentation ----------------- This application enables you to verify the integrity of your SAS cable(s) and update your hard drives to the latest firmware version. Please review the supported SAS / SATA drives listed for criticality of updates. ---------------------------- 2.0 Starting the Application ---------------------------- Insert the CD in the CD drive of the system you want to check and start the system. NOTE: Your system must be set to boot from the CD drive first. You can set this order in your system BIOS. See your User's Guide for information. ---------------------------- 3.0 Running the Application ---------------------------- * When you first start the application, you cannot use the mouse on the initial menu. You must use the up/down arrow keys to navigate to options. Press <Enter> to select an option. * Back up your data before updating the firmware. Once the update has started it must run to completion; otherwise, the drive may not function. Dell recommends using an uninterruptible power supply during the procedure. * Do not run this application during a RAID volume rebuild. ------------------------ 3.1 Automatic Batch Mode ------------------------ * The Update utility defaults to a fully Automatic Batch mode requiring no user interaction. When the application starts, there is a prompt to load Patch.zip. Default is {Y}, this loads the Automatic routines. A second prompt to run Interactive or Automatic Batch. Default is {B}. -------------------- 3.2 Interactive Mode -------------------- * In Interactive mode, there are two menu options to update firmware, Automatic and Interactive. Automatic mode allows for unattended firmware updates. Interactive mode allows the user to select individual drives to update. * When updates are complete, a prompt to view the results file, default is {N}. ---------------------------- 4.0 Notes on the Application ---------------------------- * On drives connected to a PERC5, the utility will wait for 5 minutes for the first drive. There is no wait on subsequent drives, unless the utility is exited. Do not power cycle or reboot your system while the update is taking place. * While the update is in progress, status will show "Testing". This is an indication that drive firmware is being flashed, no other tests are occurring. * This utility supports SAS and SATA Hard drives. For any model Hard drive that is not supported by this utility, it will display "No Update". --------------------- 5.0 Supported Systems --------------------- This utililty is supported on all 5G and above PowerEdge, MD1000 PowerVault and Precision systems. Only drives attached to SAS or PERC controllers can be updated. -------------------- 6.0 Supported Drives -------------------- The following is a listing of drives supported on this release: ---------------------- 6.1 SAS Drive Releases ---------------------- FUJITSU SAS Drive Model Firmware Criticality ----------- -------- ----------- MAY2036RC D109 Recommended MAY2073RC D109 Recommended MAX3036RC D207 Recommended MAX3073RC D207 Recommended MAX3147RC D207 Recommended HITACHI SAS Drive Model Firmware Criticality ----------- -------- ----------- HUS151436VLS300 A5F0 Recommended HUS151473VLS300 A5F0 Recommended HUS151414VLS300 A5F0 Recommended MAXTOR SAS Drive Model Firmware Criticality ----------- -------- ----------- ATLAS15K2_036SAS BP05 Recommended ATLAS15K2_073SAS BP05 Recommended ATLAS15K2_147SAS BP05 Recommended ATLAS10K5_073SAS BP05 Recommended ATLAS10K5_147SAS BP05 Recommended ATLAS10K5_300SAS BP05 Recommended SEAGATE SAS Drive Model Firmware Criticality ----------- -------- ----------- ST373455SS S515 Recommended ST3146855SS S515 Recommended ST3300655SS S515 Recommended ST373355SS T109 Recommended ST3146755SS T109 Recommended ST3300555SS T109 Recommended ST9146802SS S207 Recommended ST973402SS S207 Recommended ST936701SS S110 Recommended ST973401SS S110 Recommended ST336754SS S412 Recommended ST373454SS S412 Recommended ST3146854SS S412 Recommended ST936751SS SM04 Recommended ST973451SS SM04 Recommended ----------------------- 6.2 SATA Drive Releases ----------------------- Western Digital SATA Drive Model Firmware Criticality ----------- -------- ----------- WDC WD5000YS-18M 2E0B Urgent WDC WD2500YS-18S 6C06 Urgent WDC WD1600YS-18S 6C06 Urgent WDC WD800AAJS-18 0A04 Urgent ##################################################################### Information in this document is subject to change without notice. (C) 2004-2007 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: "Dell"is a trademark of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own. Copyright 2004-2007, Dell Inc.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.