;===============================================================================
; OEMSETNT.INF
; Accton EN2220 Fast EtherCard-32
; 10/100 Fast Ethernet CardBus PC Card
;
; Accton Technology Corporation
;
; Platform Type : Intel x86
;
; Usage:
;
; This file specifies the installation/configuration/deinstallation
; procedure of the Accton EN2220 NDIS3/4 miniport driver for
; Windows NT 3.51 and 4.0 on the Intel x86 platform.
; It can be called from Windows Setup directly, or via the
; Windows NT Networks Control Program Applet (NCPA) from inside
; the Windows Control Panel.
;
; History:
;
; 01-APR-1997 Lee R0.0 Pre-release
; 21-AUG-1997 Lee R1.0 First release
;
;===============================================================================
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
MCA
PCI
[Options]
EN2220
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
;--- Product information
Manufacturer = "Accton"
ProductMajorVersion = "1"
ProductMinorVersion = "00"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;--- Software information
ProductSoftwareName = "ACC2220"
ProductSoftwareTitle = "Accton EN2220 Fast Ethernet CardBus PC Card Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ACC2220.sys"
NetRuleSoftwareType = "ACC2220Sys ndisDriver ACC2220Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """ACC2220Sys"" yes no container"
NetRuleSoftwareClass = {"ACC2220Driver basic"}
NetRuleSoftwareSWBindable = {"ACC2220Driver EN2220Adapter non exclusive 100"}
;--- Help file information
;OptionHelpFile = "ACC2220.hlp"
;--- Hardware information
ProductHardwareName = "ACC2220"
ProductHardwareEN2220Title = "Accton EN2220 Fast Ethernet CardBus PC Card"
NetRuleHardwareEN2220Type = "EN2220 EN2220Adapter"
NetRuleHardwareEN2220Class = {"EN2220Adapter basic"}
NetRuleHardwareBindForm = " yes yes container"
;--- Product information
;AdapterEN2220Type = 5 ;; PCI board
AdapterEN2220Type = 0
;HelpEN2220Id = 10
EN2220CFID = 1642513 ;; 0x00191011
TxmThreshold100 = 512 ;; 100Mbps default threshold
DirectEnable = 1
;--- Registry Key
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
;--- set default value
set Status = STATUS_FAILED
;--- get parameters
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
;--- Checked Language supported
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
; set NetRuleSoftwareBindable = $($R1)
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(Function$(Option)Title)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = configureadapter
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
;--- set parameters default value
;TBD
set ConnectionValue = *($(ConnectionList), 1)
set IoBaseAddressValue = *($(IoBaseAddressList), 25)
set MemoryBaseAddressValue = *($(MemoryBaseAddressList), 9)
set IrqNumberValue = *($(IrqNumberList), 6)
set SocketNumberValue = *($(SocketNumberList), 1)
set InterruptStyleValue = *($(InterruptStyleList), 1)
set InterruptRoutingValue = *($(InterruptRoutingList), 1)
set StoreAndForwardValue = *($(StoreAndForwardList), 2)
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
Set Source_Directory = "WINNT"
Set Dll_Directory = "WINNT"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
Endif
; WHL ifstr(i) $(DoCopy) == "YES"
; WHL Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Dll"
; install "Install-Hlp"
; WHL endif
Goto installproduct
configureadapter = +
Ifstr(i) $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
Endif
Endif
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
;TBD
Ifstr(i) $(ValueName) == "ConnectionType"
set ConnectionIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IoBaseAddressIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set MemoryBaseAddressIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IrqNumberIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "StoreAndForward"
set StoreAndForwardIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptStyle"
set InterruptStyleIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "SocketNumber"
set SocketNumberIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptRouting"
set InterruptRoutingIndex = $(ValueData)
endif
EndForListDo
;TBD
set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
ifstr(i) $(ConnectionValue) == ""
set ConnectionValue = *($(ConnectionList), 2)
endif
set IoBaseAddressValue = *($(IoBaseAddressList), ~($(IoBaseAddressValues),$(IoBaseAddressIndex)))
ifstr(i) $(IoBaseAddressValue) == ""
set IoBaseAddressValue = *($(IoBaseAddressList), 25)
endif
set MemoryBaseAddressValue = *($(MemoryBaseAddressList), ~($(MemoryBaseAddressValues),$(MemoryBaseAddressIndex)))
ifstr(i) $(MemoryBaseAddressValue) == ""
set MemoryBaseAddressValue = *($(MemoryBaseAddressList), 9)
endif
set IrqNumberValue = *($(IrqNumberList), ~($(IrqNumberValues),$(IrqNumberIndex)))
ifstr(i) $(IrqNumberValue) == ""
set IrqNumberValue = *($(IrqNumberList), 6)
endif
set SocketNumberValue = *($(SocketNumberList), ~($(SocketNumberValues),$(SocketNumberIndex)))
ifstr(i) $(SocketNumberValue) == ""
set SocketNumberValue = *($(SocketNumberList), 1)
endif
set InterruptStyleValue = *($(InterruptStyleList), ~($(InterruptStyleValues),$(InterruptStyleIndex)))
ifstr(i) $(InterruptStyleValue) == ""
set InterruptStyleValue = *($(InterruptStyleList), 1)
endif
set InterruptRoutingValue = *($(InterruptRoutingList), ~($(InterruptRoutingValues),$(InterruptRoutingIndex)))
ifstr(i) $(InterruptRoutingValue) == ""
set InterruptRoutingValue = *($(InterruptRoutingList), 1)
endif
set StoreAndForwardValue = *($(StoreAndForwardList), ~($(StoreAndForwardValues),$(StoreAndForwardIndex)))
ifstr(i) $(StoreAndForwardValue) == ""
set StoreAndForwardValue = *($(StoreAndForwardList), 2)
endif
adapteroptions = +
set from = adapteroptions
LoadLibrary "disk 1" $(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)
; SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
ui start "InputDlg" $(hLib)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set ConnectionIndex = $(Combo1Out)
set IoBaseAddressIndex = $(Combo2Out)
set MemoryBaseAddressIndex = $(Combo3Out)
set IrqNumberIndex = $(Combo4Out)
set SocketNumberIndex = $(Combo5Out)
set InterruptStyleIndex = $(Combo6Out)
set InterruptRoutingIndex = $(Combo7Out)
set StoreAndForwardIndex = $(Combo8Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
ui pop 1
goto end
endif
set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
set IoBaseAddressValue = *($(IoBaseAddressValues), ~($(IoBaseAddressList),$(IoBaseAddressIndex)))
set MemoryBaseAddressValue = *($(MemoryBaseAddressValues), ~($(MemoryBaseAddressList),$(MemoryBaseAddressIndex)))
set IrqNumberValue = *($(IrqNumberValues), ~($(IrqNumberList),$(IrqNumberIndex)))
set SocketNumberValue = *($(SocketNumberValues), ~($(SocketNumberList),$(SocketNumberIndex)))
set InterruptStyleValue = *($(InterruptStyleValues), ~($(InterruptStyleList),$(InterruptStyleIndex)))
set InterruptRoutingValue = *($(InterruptRoutingValues), ~($(InterruptRoutingList),$(InterruptRoutingIndex)))
set StoreAndForwardValue = *($(StoreAndForwardValues), ~($(StoreAndForwardList),$(StoreAndForwardIndex)))
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
installproduct =+
LoadLibrary "disk 1" $(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)
; SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
ui start "InputDlg" $(hLib)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set ConnectionIndex = $(Combo1Out)
set IoBaseAddressIndex = $(Combo2Out)
set MemoryBaseAddressIndex = $(Combo3Out)
set IrqNumberIndex = $(Combo4Out)
set SocketNumberIndex = $(Combo5Out)
set InterruptStyleIndex = $(Combo6Out)
set InterruptRoutingIndex = $(Combo7Out)
set StoreAndForwardIndex = $(Combo8Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
ui pop 1
goto end
endif
StartWait
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
set IoBaseAddressValue = *($(IoBaseAddressValues), ~($(IoBaseAddressList),$(IoBaseAddressIndex)))
set MemoryBaseAddressValue = *($(MemoryBaseAddressValues), ~($(MemoryBaseAddressList),$(MemoryBaseAddressIndex)))
set IrqNumberValue = *($(IrqNumberValues), ~($(IrqNumberList),$(IrqNumberIndex)))
set SocketNumberValue = *($(SocketNumberValues), ~($(SocketNumberList),$(SocketNumberIndex)))
set InterruptStyleValue = *($(InterruptStyleValues), ~($(InterruptStyleList),$(InterruptStyleIndex)))
set InterruptRoutingValue = *($(InterruptRoutingValues), ~($(InterruptRoutingList),$(InterruptRoutingIndex)))
set StoreAndForwardValue = *($(StoreAndForwardValues), ~($(StoreAndForwardList),$(StoreAndForwardIndex)))
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusTypeNum = 5
set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifint $($(Option)CFID) == $(EN2220CFID)
set NewValueList = {{SnoozeMode,$(NoTitle),$(!REG_VT_DWORD),0}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}, +
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddressValue)}, +
{MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemoryBaseAddressValue)}, +
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IrqNumberValue)}, +
{SocketNumber,$(NoTitle),$(!REG_VT_DWORD),$(SocketNumberValue)}, +
{InterruptStyle,$(NoTitle),$(!REG_VT_DWORD),$(InterruptStyleValue)}, +
{InterruptRouting,$(NoTitle),$(!REG_VT_DWORD),$(InterruptRoutingValue)}, +
{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForwardValue)}, +
{DirectEnable,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
CloseRegKey $(HardParameterKey)
; Disable PCMCIA.SYS
;-------------------
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD), 4}
CloseRegKey $(PCMCIAKey)
EndWait
goto successful
updateparameters =+
set HardParameterKey = $($R3)
set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}, +
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddressValue)}, +
{MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemoryBaseAddressValue)}, +
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IrqNumberValue)}, +
{SocketNumber,$(NoTitle),$(!REG_VT_DWORD),$(SocketNumberValue)}, +
{InterruptStyle,$(NoTitle),$(!REG_VT_DWORD),$(InterruptStyleValue)}, +
{InterruptRouting,$(NoTitle),$(!REG_VT_DWORD),$(InterruptRoutingValue)}, +
{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),$(StoreAndForwardValue)}, +
{DirectEnable,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyParameters)
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
;Enable PCMCIA.SYS
;----------------------
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MAXIMUM_ALLOWED) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0}
CloseRegKey $(PCMCIAKey)
goto end
UpgradeSoftware = +
Set Source_Directory = "WINNT"
Set Dll_Directory = "WINNT"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll $(SrcDir)$(Dll_Directory) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
;[Install-Hlp]
; set STF_VITAL = ""
; AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
; set !STF_NCPA_FLUSH_COPYLIST = TRUE
; CopyFilesInCopyList
; Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Dll $(SrcDir)$(Dll_Directory) $(!STF_WINDOWSSYSPATH)
; AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "Accton Fast EtherCard-32 Driver Disk"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, OEMSETNT.INF, SIZE=1000, RENAME=$(!UG_Filename)
[Files-EN2220]
1,ACC2220.SY_ , SIZE=999, DECOMPRESS, RENAME=ACC2220.SYS
[Files-Dll]
1,EN2220.DL_, SIZE=999, DECOMPRESS, RENAME=EN2220.DLL
;[Files-Hlp]
;1,ACC2220.HLP , SIZE=999
;
[LanguagesSupported]
ENG
[OptionsTextENG]
EN2220 = "Accton EN2220 Fast Ethernet CardBus PC Card"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
DialogDllName = "EN2220.DLL"
ProductSoftwareDescription = "Accton EN2220 NDIS 3 driver"
FunctionEN2220Title = "Accton EN2220 CardBus PC Card Setup"
ProductHardwareEN2220Description = "Accton EN2220 Fast Ethernet CardBus PC Card"
ConnectionList = ^(ConnectionChoices, 1)
ConnectionValues = ^(ConnectionChoices, 2)
IoBaseAddressList = ^(IoBaseAddressChoices, 1)
IoBaseAddressValues = ^(IoBaseAddressChoices, 2)
MemoryBaseAddressList = ^(MemoryBaseAddressChoices, 1)
MemoryBaseAddressValues = ^(MemoryBaseAddressChoices, 2)
IrqNumberList = ^(IrqNumberChoices, 1)
IrqNumberValues = ^(IrqNumberChoices, 2)
SocketNumberList = ^(SocketNumberChoices, 1)
SocketNumberValues = ^(SocketNumberChoices, 2)
InterruptStyleList = ^(InterruptStyleChoices, 1)
InterruptStyleValues = ^(InterruptStyleChoices, 2)
InterruptRoutingList = ^(InterruptRoutingChoices, 1)
InterruptRoutingValues = ^(InterruptRoutingChoices, 2)
StoreAndForwardList = ^(StoreAndForwardChoices, 1)
StoreAndForwardValues = ^(StoreAndForwardChoices, 2)
NoList = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
DlgText = "Choose the working parameters for the network adapter. "
DlgTemplate = "EN2220"
DlgType = "Combination"
Caption = $(Function$(Option)Title)
Combo1Label = "Connection Type:"
Combo2Label = "I/O Port:"
Combo3Label = "Memory Base Address:"
Combo4Label = "Interrupt Number:"
Combo5Label = "Socket Number:"
Combo6Label = "Interrupt Style:"
Combo7Label = "Interrupt Routing:"
Combo8Label = "Store And Forward:"
Combo1List = $(ConnectionList)
Combo1Out = $(ConnectionValue)
Combo2List = $(IoBaseAddressList)
Combo2Out = $(IoBaseAddressValue)
Combo3List = $(MemoryBaseAddressList)
Combo3Out = $(MemoryBaseAddressValue)
Combo4List = $(IrqNumberList)
Combo4Out = $(IrqNumberValue)
Combo5List = $(SocketNumberList)
Combo5Out = $(SocketNumberValue)
Combo6List = $(InterruptStyleList)
Combo6Out = $(InterruptStyleValue)
Combo7List = $(InterruptRoutingList)
Combo7Out = $(InterruptRoutingValue)
Combo8List = $(StoreAndForwardList)
Combo8Out = $(StoreAndForwardValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List, Combo4List, Combo5List, Combo6List, Combo7List, Combo8List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out, Combo6Out, Combo7Out, Combo8Out}
EditTextLim = ""
CBOptionsGreyed = {}
;MinHelpId = 10
;MaxHelpId = 1050
NotifyFields = {NO, NO, NO, NO, NO, NO, NO, NO}
;HelpContext = $(Help$(Option)Id)
[ConnectionChoices]
Connect_0 = "AutoSense", 0
Connect_1 = "100M", 8
Connect_2 = "100M Full Duplex", 9
Connect_3 = "10M", 2
Connect_4 = "10M Full Duplex", 3
Connect_5 = "10M No Link Test", 4
[IoBaseAddressChoices]
IoBase_0 = "1000", 4096
IoBase_1 = "1800", 6144
IoBase_2 = "2000", 8192
IoBase_3 = "2800", 10240
IoBase_4 = "3000", 12288
IoBase_5 = "3800", 14336
IoBase_6 = "4000", 16384
IoBase_7 = "4800", 18432
IoBase_8 = "5000", 20480
IoBase_9 = "5800", 22528
IoBase_10 = "6000", 24576
IoBase_11 = "6800", 26624
IoBase_12 = "7000", 28672
IoBase_13 = "7800", 30720
IoBase_14 = "8000", 32768
IoBase_15 = "8800", 34816
IoBase_16 = "9000", 36864
IoBase_17 = "9800", 38912
IoBase_18 = "A000", 40960
IoBase_19 = "A800", 43008
IoBase_20 = "B000", 45056
IoBase_21 = "B800", 47104
IoBase_22 = "C000", 49152
IoBase_23 = "C800", 51200
IoBase_24 = "D000", 53248
IoBase_25 = "D800", 55296
IoBase_26 = "E000", 57344
IoBase_27 = "E800", 59392
IoBase_28 = "F000", 61440
IoBase_29 = "F800", 63488
[StoreAndForwardChoices]
Stfd_0 = "OFF", 0
Stfd_1 = "ON", 1
[InterruptStyleChoices]
Istyle_0 = "PCI-IRQ-Routed", 0
Istyle_1 = "ISA-IRQ-Routed", 1
[InterruptRoutingChoices]
Irouting_0 = "INT A", 0
Irouting_1 = "INT B", 1
Irouting_2 = "INT C", 2
Irouting_3 = "INT D", 3
[SocketNumberChoices]
Socket_0 = "Auto detect", 0
Socket_1 = "Socket #0", 1
Socket_2 = "Socket #1", 2
[IrqNumberChoices]
Irq_0 = "IRQ 3", 3
Irq_1 = "IRQ 4", 4
Irq_2 = "IRQ 5", 5
Irq_3 = "IRQ 9", 9
Irq_4 = "IRQ 10", 10
Irq_5 = "IRQ 11", 11
Irq_6 = "IRQ 12", 12
Irq_7 = "IRQ 15", 15
[MemoryBaseAddressChoices]
MemBase_0 = "C8000", 819200
MemBase_1 = "C9000", 823296
MemBase_2 = "CA000", 827392
MemBase_3 = "CB000", 831488
MemBase_4 = "CC000", 835584
MemBase_5 = "CD000", 839680
MemBase_6 = "CE000", 843776
MemBase_7 = "CF000", 847872
MemBase_8 = "D0000", 851968
MemBase_9 = "D1000", 856064
MemBase_10 = "D2000", 860160
MemBase_11 = "D3000", 864256
MemBase_12 = "D4000", 868352
MemBase_13 = "D5000", 872448
MemBase_14 = "D6000", 876544
MemBase_15 = "D7000", 880640
MemBase_16 = "D8000", 884736
MemBase_17 = "D9000", 888832
MemBase_18 = "DA000", 892928
MemBase_19 = "DB000", 897024
MemBase_20 = "DC000", 901120
MemBase_21 = "DD000", 905216
MemBase_22 = "DE000", 909312
MemBase_23 = "DF000", 913408
MemBase_24 = "E0000", 917504
MemBase_25 = "E1000", 921600
MemBase_26 = "E2000", 925696
MemBase_27 = "E3000", 929792
MemBase_28 = "E4000", 933888
MemBase_29 = "E5000", 937984
MemBase_31 = "E6000", 942080
MemBase_32 = "E7000", 946176
MemBase_33 = "E8000", 950272
MemBase_34 = "E9000", 954368
MemBase_35 = "EA000", 958464
MemBase_36 = "EB000", 962560
MemBase_37 = "EC000", 966656
MemBase_38 = "ED000", 970752
MemBase_39 = "EE000", 974848
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.